KingChain 3/16 in. Zinc-Plated Wire Rope Clip and Thimble Set
Product Overview
KingChain Wire Rope Clips and Thimbles are used to create a complete and secure eye or loop on wire rope. Wire rope should be the same diameter as rope clip and thimble. Wire Rope Clips consist of a U-shaped bolt, a forged saddle and 2 threaded nuts. The 2 layers of wire rope are placed in the U-bolt and clamped into place for a tight connection. Wire Rope Thimbles form the inside of the loop eye and provide rigidity and abrasion resistance for the inside of the loop. Both clips and thimbles are made from steel with a zinc-plated finish for weather resistance. If used on plastic coated cable, remove the coating from the assembly area before creating the loop. Do not use to hang loads, lift loads, support weight of persons or objects, and do not use on athletic or playground equipment.
- Use exclusively with 3/16 in. wire rope
- Includes 2 wire rope clips and 1 wire rope thimble
- To assemble the wire rope clips, insert both ends of wire into clip saddle and tighten nuts until secure
- For a safe connection, be sure to use the right number of clips, number of clips to use: 1/16 in. to 3/8 in. rope - 3 clips, 1/2 in. to 5/8 in. rope - 4 clips, 3/4 in. rope - 5 clips
- To assemble wire rope thimbles, place thimble into loop end, insert both ends of wire into clip saddle and tighten nuts until secure
Specifications
Warranty
Guaranteed against defects in workmanship and material or product replaced free of charge