Searched for "40151511"
For 4 in. inside diameter or larger will casings. Pumps up to 150 ft.. Patented floating stack design for sand resistance and reduced sand locking. Corrosion-resistant stainless steel pump and motor housing. Heavy-duty discharge connection. Precision-molded impellers and diffusers. Includes built-in check valve. Water filled submersible motor. 230-Volt, 1/2 HP, 2-wire motor does not need a control box.
- 10 GPM rated model for maximum efficiency in most homes
- 1-1/4 in. corrosion-resistant thermoplastic discharge head outlives conventional metals even in the harshest environments
- High-efficiency motor for fewer energy dollars
- NEMA-standard motor
- Built with a green ground wire per national electric code specifications for ground protection
- Start and run capacitors are built into the motor so there is no need for a control box
Made of heavy-gauge steel with an appliance-like finish, the Flotec 35 Gal. Pre-Charged Pressure Tank with 82 Gal. Equivalent Rating is constructed for durability and a long life. Featuring a conveniently located air valve for quick hookup. This tank comes pre-charged to 40 psi and has a replaceable air/water separator that is FDA approved.
- Ideal for household applications
- Precision press fit design reduces corrosion and seam leaks
- Tough, appliance-like finish for a long life
- Replaceable, FDA approved air/water separator for easy maintenance
- Convenient air valve location for quick hookup
- Heavy-gauge steel construction for durability
The Everbilt 1/2 HP Cast Iron Effluent Pump is constructed of heavy-duty cast iron and features a PSC motor for energy efficiency. The pump is engineered to pass 3/4 in. solids. The HDEFR50W will pump up to 3180 GPH at 10 ft.
- Tethered float switch automatically starts and stops the pump
- PSC motor ensures energy efficiency
- Heavy-duty cast iron construction for heat dissipation and durability
- Piggyback float switch allows for automatic or manual operation
- Built-in thermal overload protection
- 18 Minimum Basin Diameter required when installed in a sewage basin application
Rugged Cast Iron Housing Construction. Provides Excellent Performance with Good Pressure for Well to 25 ft. Deep to water. 30/50 psi Pressure Switch. Flow Rates to 15 GPM, Pressures to 70 psi. A.O. Smith 115/230 Dual Voltage Motor.
- 3/4 HP cast iron shallow well jet pump provides strong performance with good pressure for wells 25 ft. deep or less
- High-strength polycarbonate nozzle and venture for maximum resistance to corrosion and abrasion
- Cleanout plug provided for ease of service
- Noryl impeller is precision-molded for perfect balance with ultra-smooth for highest performance and efficiency
Pre-charged pressure tanks require 50% less space than standard conventional tanks, while providing greater water capacity between pump cycles for maximum system life. Tough appliance-like finish for extended life. Water never touches metal components, replaceable air/water separator for easy maintenance. Convenient air valve location for quick air pressure check.
- 85 Gal. pressure tank is factory pre-charged to 40 psi for efficiency
- Heavy-Gauge steel construction for maximum durability and extended life
- Precision press fit design minimizes gaps between components, reducing corrosion and seam leaks
- Large capacity ideal for high demand water usage
- NSF-61 approved tank with replaceable air/water separator
Shallow and deep well uses. 1 piece stainless steel shaft. Cast iron casing. Lexan impeller. Pressures to 96 psi. Lifts to 90 ft. Flow rates to 20.6 GPM. 1-1/4 in. suction, 1 in. discharge, 1 in. drive. 30/50 psi Square D pressure switch. A.O. Smith motor, 115/230 dual voltage.
- Close-grained cast iron pump body and base are rugged 1-piece unit, specially treated to resist corrosion
- Simple, built-in pressure regulator is performance proven and adjustable for best performance on all deep well installations
- Preceision-molded diffuser allows the pump to prime faster and handles more air with multi-port, precision-molded, reinforced polypropylene diffuser
- Mechanical shaft seal: precision-lapped and highly polished carbon-ceramic, stainless steel construction
Featuring an appliance-like finish for a long life, the Flotec 19-Gallon Pre-Charged Pressure Tank with 42-Gallon Equivalent Rating is pre-charged to 40 psi. The tank features heavy-gauge steel construction, and the metal parts of this durable tank do not touch water. Conveniently sized, this tank is ideal for lawn sprinkling and has an air/water separator that can be replaced.
- 19-gallon capacity vertical tank is ideal for lawn sprinkling
- Water does not touch metal components
- Replaceable air/water separator for easy maintenance
- Convenient size is perfect for cabins and summer homes
- Tough, appliance-like finish for a long life
- Heavy-gauge steel construction for durability
- 1 in. NPT female plumbing connection
- Factory pre-charged to 40 psi
- 1 in. NPT female plumbing connection
Rugged Cast Iron Housing Construction. Provides Excellent Performance with Good Pressure for Well to 25 ft. Deep to water. 30/50 psi Pressure Switch. Flow Rates to 15 GPM, Pressures to 70 psi. A.O. Smith 115/230 Dual Voltage Motor.
- 3/4 HP cast iron shallow well jet pump provides strong performance with good pressure for wells 25 ft. deep or less
- High-strength polycarbonate nozzle and venture for maximum resistance to corrosion and abrasion
- Cleanout plug provided for ease of service
- Noryl impeller is precision-molded for perfect balance with ultra-smooth for highest performance and efficiency
The K2 Pumps 3/4 HP shallow well jet pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump housing is constructed of fiberglass-reinforced thermoplastic which makes it corrosion resistant and extends the life in the most corrosive water applications. Excellent choice for driven wells.
- Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Pre-mounted 30-50 pressure switch for automated operation
- Includes 100 PSI gauge for monitoring pressure
- 1-1/4 in. NPT suction and 1 in. NPT discharge, includes stainless steel discharge and suction rings to prevent cracking when over tightening
- Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 1 year warranty
The K2 3/4 HP Submersible Effluent Pump is designed to pump effluent, wastewater, or flood water that contains solids up to ¾ inches. The pump is designed to fit into an 18 in. Dia. or larger pit. The pump includes a piggyback tethered float switch for reliable maintenance-free operation and is easily replaced.
- Vortex impeller handles up to 3/4 in. solids and helps prevent clogging
- Includes innovative 2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Piggyback tethered float switch independently tested to over 1,000,000 cycles
- 25 ft. power cord
- 2 year warranty
The K2 Pumps 1/2 HP Shallow Well Jet Pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water.
- Heavy-duty, dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Capacitor Start Induction Run (CSIR) motor design ensures higher starting torque
- Mechanical seal and stainless steel shaft
- Pre-mounted 30-50 pressure switch for automated operation
- Pressure gauge included for monitoring pressure
- 1-1/4 inch NPT suction and 1 inch NPT discharge
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
- 3 year warranty
The Everbilt Jet/Tank system comes with a 1/2 HP shallow well jet pump manufactured of heavy-duty cast iron for durability. The system also includes a 6 gallon pre-charged tank (15 gallon standard tank equivalent), stainless steel braided hose and the fittings to connect the pump to the tank. The system may be used for water depths to 25 ft. which includes drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for small homes, cabins, farms, low-flow sprinkler systems, and utility water.
- Totally enclosed fan cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
- Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Pre-mounted 30-50 pressure switch for automated operation
- Pressure gauge included for monitoring pressure
- 1-1/4 in. NPT suction and 1 inch NPT discharge
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
- 1 year warranty
The K2 Jet/Tank system includes a 1/2 HP cast iron shallow well jet pump, 6 gallon precharged tank and stainless steel braided hose and fittings to connect the pump to the tank. The system may be used for water depths to 25 ft. which includes drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for small homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump includes a 30-50 pressure switch for automatic operation. 1 in. NPT suction and 1 in. NPT discharge.
- Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Pre-mounted 30-50 pressure switch for automated operation, also includes 100 PSI gauge for monitoring pressure
- 1 in. NPT suction and 1 in. NPT discharge
- Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 3 year warranty
The Everbilt 3/4 HP rugged cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled, the unit is supplied with a pre-installed 30-50 pressure switch for automatic operation and a pressure gauge to monitor pressure. The unit is supplied with both the shallow well and deep well ejectors. The unit comes with the shallow well jet ejector installed on the pump for applications with depths to water 25 ft or less (one pipe system). For deep well applications, remove the shallow well ejector from the front of the pump and replace the nozzle and venturi with the deep well venturi and nozzle supplied for deep well applications. For deep well installations with water depths over 25 ft. to 70 ft., the ejector is installed in the well using 1 in. and 1-1/4 in. piping (two-pipe system).
- Heavy-duty cast iron construction for maximum durability
- Heavy-duty, dual voltage, dual ball bearing, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Totally enclosed fan cooled motor (TEFC) design protects the motor internals from the elements and rodents, fan cooled helps reduce motor temperature and increases life
- 30-50 pressure switch pre-installed for automatic operation. also includes 100 PSI gauge for monitoring pressure
- Supplied with shallow well ejector installed and deep well conversion components
- Shallow well application: depth to water 25 ft. or less
- Deep well application: depth to water 25 ft. - 70 ft.
- 1 year warranty
The K2 Pumps ¾ HP Shallow Well Jet Pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low flow sprinkler systems, and utility water.
- Totally enclosed fan cooled (TEFC) motor protects motor internals from the elements
- Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Pre-mounted 30-50 pressure switch for automated operation
- Pressure gauge included for monitoring pressure
- 1 in. NPT suction and 1 in. NPT discharge
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 2 year warranty
The K2 Pumps IntelliJet Convertible Jet Pump is constructed of heavy-duty cast iron and may be used for shallow well (single pipe) applications with water depth to 25 ft. or deep well (two pipe) applications with water depths to 90 ft. The IntelliJet technology is the most advanced in its category and does the troubleshooting for you. The LED panel indicates different status functions such as dry run protection, locked rotor/clogged impeller protection, unusual voltage protection, and too frequent starting (short cycle) protection. The IntelliJet motor design is a dual voltage 115/230-Volt motor that automatically detects the voltage. No rewiring or switching needed.
- LED Diagnostics Panel indicates operation status of the pump and alerts you if there is an issue
- Both shallow well (single pipe) and deep well (2 pipe) ejector kits included
- Includes pressure regulator for deep well applications
- Includes 30-50 pressure switch for monitoring pressure
- Pressure gauge included for monitoring pressure
- 1-1/4 in. NPT suction and 1 in. NPT discharge
- Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 3 year warranty
The K2 Pumps ½ HP shallow well jet pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump housing is constructed of fiberglass-reinforced thermoplastic which makes it corrosion resistant and extends the life in the most corrosive water applications. Excellent choice for driven wells.
- Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Pre-mounted 30-50 pressure switch for automated operation
- Includes 100 PSI gauge for monitoring pressure
- 1-1/4 in. NPT suction and 1 in. NPT discharge, includes stainless steel discharge and suctions rings to prevent cracking when over tightening
- Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 1 year warranty
The Everbilt 1 HP rugged cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled. The unit is supplied with a built-in 30/50 psi pressure switch for automatic operation and a pressure gauge. The unit is supplied with both the shallow well and deep well ejectors. The unit comes with the shallow well jet ejector installed on the pump for applications with depths to water 25 ft. and below. The deep well venturi and nozzle is supplied for deep well applications. For deep well applications with water depths over 25 ft. to 70 ft., the venturi and nozzle are placed in the well on the piping. The unit is supplied with a 1-year warranty.
- Rugged cast-iron construction
- Supplied with the shallow well jet ejector installed and supplied with the deep well components
- For professional technical support call 1-844-241-5521
- Heavy-duty dual voltage 115/230-Volt motor, pre-set at 230-Volt
- Deep well application water level: 70 ft.
- Shallow well application: depth to water 25 ft. or less
- Deep well application:depth to water 25 ft. - 70 ft.
- One-year warranty
- Call 1-844-241-5521 for Installation Help
The K2 PRO 3/4 HP Convertible Deep Well Jet Pump was engineered with the construction materials and performance the PRO prefers. It can be used for shallow well applications (single pipe) with depth to water 25 ft. or deep well applications (two pipes) with depth to water up to 90 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 90 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water.
- Both shallow well (single pipe) and deep well (2 pipes) ejector kits included
- Heavy-duty, dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
- Capacitor Start Induction Run (CSIR) motor design ensures higher starting torque
- Mechanical seal and stainless steel shaft
- Pre-mounted 30-50 pressure switch for automated operation
- Pressure gauge included for monitoring pressure
- 1-1/4 in. NPT suction and 1 in. discharge
- Self-priming after pump housing is initially filled and foot valve or check valve is installed
- Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
- 3 year warranty