Searched for "40142000"
Kobra high pressure hoses. Series has gasket seal fitting, the depressor is set to ARI standard for the access valve core, and blow-out resistant depressor and barrel gasket. Pressure rating 800 psi and 4000 psi burst. Suitable for R-410A.
- Gasket seal hose
- High pressure charging hose set suitable for R-410A
- Blow-out resistant gasket locks into cup of fitting
- Barbed depressor to guide the valve core into place
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Single 60 in. (152 cm) blue standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi working pressure
- 3000 psi burst
- Ideal for use with all standard refrigerant
This 24 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For Very High or Low pressure. Ready to Install.
- To connect regulators to BBQ grills, camp stoves, patio heaters and other low pressure appliances using LPG
- Thermoplastic hose 350 psi maximum working pressure
- 24 in. L x 3/8 in. MNPT x 3/8 in. swivel flare fittings
- UL listed
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Single 60 in. (152 cm) yellow standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi
- 3000 psi burst
- Ideal for use with all standard refrigerants
- Except high pressure
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Kobra series gasket seal quarter-turn ball valve hose set.Includes 3/8 in. black hose 1/4 in. x 1/4 in. with ball valve.Meets non-venting requirements by trapping refrigerant with ball valve.
- 60 in. ball valve hose set B/Y/R and 3/8 in. black hose
- Kobra gasket seal quarter-turn
- Meets non-venting requirement
- 800 psi working, 4000 psi burst
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 100 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Faster, safer and more economical method for charging LIQUID refrigerant through the low pressure side of an air conditioning or refrigeration system, without damaging the compressor. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Insta-Charge's unique internal restrictor reduces liquid flow to a level below the capacity of the compressor
- Converts liquid refrigerant to a saturated vapor for fast entry
- Insta-charge connects directly to the refrigerant can or cylinder valve
- Adds liquid tracing dye faster
- Eliminates heating or refrigerant cylinder; made of lightweight aluminum
- Sold at a fraction of the cost of other fast charging devices
Core removal tool designed for removing and replacing a in. Schrader in. type core without losing the charge. All brass construction. Not compatible with R-410A.
- Brass construction
- Not compatible with R-410A
- Designed for removing and replacing a Schrader type core without losing the charge
- Made in China
Kobra Gasket seal quarter-turn ball valve hose.Meets non-vending requirements by trapping refrigerant.Ball valve with 1/4" turn.
- Meets non-venting requirements by trapping refrigerate
- Ball valve
- 800 psi working
- 4000 psi burst
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Gasket replacement part for 1/4 in. quick couplers. Replacement gasket pack of 10. For use with standard hoses.
- Gasket replacement
- 10 pack
- Replacement gasket 1/4 in.
- 1/4 in. gasket
- 1" Length
- For 1/4" rubber hose. Ferrule reference # 7328. Hole Size (pierce) .437". Ferrule Inside diameter .656"
- Cut hose cleanly and squarely to length
- Barb size is hose I.D.
- Excellent vibration resistance
- Temperature and Working Pressure Ranges From -40°F to +160°F at 150 Maximum PSI
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- All threads manufactured to highest quality standards and tolerances
- Easy to use
- Not for underground use
- Material
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Single 72 in. (182 cm) yellow standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi working
- 3000 psi burst
- Ideal for use with all standard refrigerant
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- Threads manufactured to highest-quality standards and tolerances
- Easy to use
- Not for underground use
- Material: brass
Single 6 in. yellow Kobra high pressure hose CLV-6 series. Whip end with ball valve that opens to full flow. Traps refrigerant discharge in hose.
- 1/4 in. x 6 in. ball valve
- Whip end
- PSI 800/4000 burst
- Traps refrigerant