Searched for "40141700"
This product is a great cost saving solution. The price is affordable. It's easy to handle and install with little tools required. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
- 3/4" IPS x 3/4" IPS x 1/2" CTS
- SDR 11 X SDR 11 X 0.090"
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The 1/2 in. Tectite by Apollo Push-to-Connect Cap with Drain is the fastest, cleanest and simplest way to cap copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. The innovative venting mechanism allows air or water to escape closed piping systems for system flushing, testing or maintenance. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Vented cap design allows for draining of piping systems to allow for system flushing, maintenance or testing
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Removable and reusable
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- For use with 1/2 in. copper tube-sized pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC, and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250°F
Ships from manufacturer. Please note that additional delivery time and freight charges may apply.
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 1/2" MIP x 1/2" CTS
- 36"L
- .090" WALL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to 250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65°F to +250°F
- Maximum pressure based on 73°F working temperature
PVC 6 in. 6 in. Bell Trap Dra in. Fits over 1-1/2 in. or inside of 2 in. Sch40 DWV Pipe. Designed for Use in Garage. Solvent Weld Connection.
- PVC
- White
- Size: 6 in. x 6 in.
- Fits over 1-1/2 in. or inside of 2 in. Sch40 DWV pipe
- Designed for use in garage
- Solvent weld connection
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Durability
- No special tools needed
- Easy to install
- High quality
- Cost saving solution
- Attractive styling
Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73 working temperature
- Temperature range -65°F to +250°F
1-1/2 in. S-Trap with Adapter. PVC Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- S-trap with adapter
- PVC material
- Exclusive brand products
- Size 1-1/2 in.
- White color
- cUPC approval
Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73 working temperature
- Temperature range -65°F to +250°F
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250°F
- Pressure up to 400 psi
- Threaded
- Flare x FIP
- Forged brass
- Adapter
- 1" IPS
- SDR 11
- 12" length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65°F to +250°F
- Maximum pressure based on 73°F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73°F working temperature
- Temperature range -65°F to +250°F
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212°F
- Pressure up to 125 psi
- Do not over-tighten
- 1-year warranty against defect
- Lead free
- Brass
- MIP X POLY: 1/4" IPS x 1-1/4" IPS
- SDR 10
- 24" Vertical
- 24" Horizon
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212°F
- Pressure up to 125 psi
- Do not over-tighten
- 1-year warranty against defect
- Leaded
- Brass
This product is a great cost saving solution. The price is affordable. It's easy to handle and install with little tools required. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.
- High quality
- Reliable performance
- Durability
- Easy to install with little tools required
- Wide selection
- Great value
Can be reused which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212°F
- Pressure up to 2000 psi
- Flare
- 1-year warranty against defect
- Forged brass
- Tee
This product is a great cost saving solution. The price is affordable. It's easy to handle and install with little tools required. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
Flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P, and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gasses using forged nuts. Recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared. Not recommended for use with polybutylene or soft plastic tubing.
- Temperature range: -65F to 250F
- 45 flare
- Easy to use
- Not for underground use
- Compatible tubing: copper, brass, aluminum, welded steel hydraulic
- Resist vibration and mechanical pull-out