Searched for "40141616"
Honeywell Home's 802360JA/U is a 24-Volt replacement motor for V8043/44 zone valve. It is the ideal choice for contractors because of its easy installation. When it comes to top quality, Honeywell Home's zone valves can be trusted.
- Valve includes motor mounting screw and lead connectors
- Used with V8043A, V8043E, and V8043F
- Frequency-50 Hz, 60 Hz
- 24-Volt electrical connections
- Electrical connections - 6 in. leads; 152 mm leads
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Patent no. 5,988,201
- Light weight
- Proven durability
- Easy to install
- No clog vent
- 360 degree adjustable collar ring for installation flexibility
- Stainless steel concentrator which eliminates gurgling noise
Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.
- Bellows or globe valve construction ensures positive shut-off and leak proof operation
- Easy to install
- Manual open (bypass) lever
- 24 VAC powered with isolated end switch
Nibco ACR Copper Coupling
- 0.63" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #9001193
- 0.63" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- For use with tanks up to 1000 gallons
- Solid brass valve designed for use in a single opening ASME container with a 2-1/2" MNPT riser
- Includes: double back check filler valve, vapor equalizing valve with excess flow, pressure relief valve with protective cap, service valve, plugged 1/4" FNPT gauge boss, captive fixed liquid level gauge with 36" dip tube and junior size float gauge flange opening
- Internal threads accommodate 2-1/2" MNPT riser pipe connection and 3/4" FNPT connection for filler valve opening
- Separate opening is required for a liquid withdrawal valve
- Float gauge not included
- POL (CGA510) Vapor Service Connection
- 1-3/4" ACME Filler Connection
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Danfoss Aveo Tamperproof Sensor
- Easy To Use
- Thermostatic Radiator Valve
- Mfg #015G4240
- Easy To Use
- Thermostatic Radiator Valve
- Tamperproof
- Danfoss Aveo
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Watts 1 IN Lead Free Anti-Siphon Pressure Vacuum Breaker Backflow Preventer Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures Lead free construction Replaceable seat Female NPT inlet and outlet with quarter turn shutoffs Easy internal access Mfg #T792012
- Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point
- Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures
- Lead free construction
- Replaceable seat
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- This fitting includes a split ring and a stainless steel insert. It's also self-flaring, which means no flaring tool is needed.
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Self-flaring design ensures versatile use
- Metal-to-metal seal for durable and reliable operations
- Features 33% more sealing surface than contemporaries
- Made of high-grade brass for enhanced strength
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
- Leak resistant design
- Double O-ring stem seal
- Tamper proof design
- Sturdy forged brass handle
- Static seat disc
- Recessed excess flow valve
- Normal application forklifts
- 3/4" MNPT cylinder x 3/8" MNPT outlet
- 2.6 gpm excess flow closing
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
1/8 in. IPS male thread connection. Use screwdriver or coin to operate. 5 years warranty against defect.
- Air vent
- Hot water
- Valve only
- Nickel plated
- Silver
- Specifications
- Safety
- 125 psi
- Fits 1/8 in. threads
- Meets ASME standards
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.
- Offers constant water temperature under changing operating conditions
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
- Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
- Features dual purpose mixing or diverting values
- Lead free products have products numbers end in LF
- Available temperature gauge adapter in lead-free brass material with EPDM O-ring
- Maximum safe operating pressure (psi)150 psi
- Minimum flow rate (GPM) 0.5 GPM
- Includes check valves on hot and cold ports
Danfoss -- Straight Valve Body. For Ra2000 Units. Connection: 3/4" Npt.
The GoldTop offers a convenient, one-fits-all concept, to stock one vent for all your venting needs, between 1 and 150 psi systems. Honeywell's revolutionary patented fulcrum design offers a venting rate of 3-4 times that of other products. Used in Residential or commercial heating and cooling systems.
- Maximum safe operating pressure (psi) 150 psi
- Operating temperature range (F)240 degree F
- Male NPT connection
- Patent no. 5,988,201
- Light weight
- Proven durability
- Easy to install
- No clog vent
- 360 degree adjustable collar ring for installation flexibility
- Stainless steel concentrator which eliminates gurgling noise
Danfoss Aveo Sensors, Electronic, Sensor type. Easy To Use. Thermostatic Radiator Valve. Built in Tamper Proof. 015G4290. Mfg #015G4290
- Easy To Use
- Thermostatic Radiator Valve
- Built in Tamper Proof
- 015G4290
Danfoss Aveo Remote Sensor
- Easy To Use
- Thermostatic Sensor
- Remote Sensor
- Mfg #015G4292
- Easy To Use
- Thermostatic Sensor
- Remote Sensor
- Danfoss Aveo
The Taco Zone Valve Controller gives you the ability to control up to 6 zone valves at 1-time. Taco control's easy-to follow PC board layout eliminates the problems caused by incorrect wiring, while the external indicator lights provide instant diagnostic feedback. 24-Volt Power Output for hard wired thermostats is included.
- Controls 6 zones
- Built-in switchable priority
- External indicator lights
- Simplified wiring
Nibco ACR Copper 45degree Elbow. 0.88" Od. Dezincification Resistant. NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #9042900
- 0.88" Od
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
Quiet operation. Self-aligning barrel-type valve stem uses line pressure to seal off without binding on opening and closing. Valve stem made of stainless steel. Automatic recycling manual operator shows valve position at all times. Built-in auxiliary contacts to control burner or circulator relay. Motor can be removed from valve assembly without draining system.
- Made of corrosion-resistant stainless steel for longer life
- Motor can be removed without draining the system for quick and easy replacement
- Screw terminal wiring panel for easy install
- Quiet operation
- Time cycle: 45 seconds to open; 45 seconds too close
- 15 psi maximum differential across valve
- 3/4 in. tubing size
This 1/2 in. high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union threaded inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).
- Tight seating check valve
- Purge lever
- High capacity
- Stainless steel strainer
- Union threaded inlet connection
- Used to maintain water pressure in commercial and residential hydronic heating systems at all times
- Provides make-up water to the system in the event of system leaks
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- 4 in 1 alternative replaces a ball valve and 2 tee fittings and 1 boiler drain
- Quickly connect entire system to cold water feed
- Easily install, isolate, drain and replace any expansion tank
- Pressure rated at 600 WOG
- 1/2" FIP x MIP x FIP x HOSE
Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.
- Bellows or globe valve construction ensures positive shut-off
- Easy to install
- Manual open (bypass) lever
- 24 VAC powered with isolated end switch
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Nibco ACR Copper Coupling
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #039923307125
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Honeywell AMX series Direct Connect reduces water heater installation time as the cold and hot port position eliminates the need for typical elbows and tees. New design requires a maximum of just two sweat connections. Requires fewer parts than previous models.
- Designed to be directly installed on water heater hot outlet port
- Offers constant water temperature under changing operating conditions
- Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
- Features brass/stainless construction and Teflon coated of wear surfaces
- Used in domestic hot water
- Hot inlet - female NPT; mixed outlet - male NPT
- Mixed water supply--100 degree F to 145 degree F
- Minimum flow rate 0.25 GPM; recirculation port: 1/2 in. NPT; alternate hot port: 1/2 in. NPT
- 2.3 CV capacity
- Maximum safe operating pressure 150 psi
Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.
- Standard checkout procedure
- Robust push terminals
- Common-Sense LEDs
- Clean, professional installation
Nibco Copper Coupling
- 0.5 x 0.5" Copper Coupling
- With Stop
- Mfg #039923307644
- 0.5 x 0.5" Copper Coupling
- With Stop
- 9002003
- 1-1/2" X 1-1/2"
- 90 Degree Safety Filler Valve with AUTO & MANUAL Shutoff Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Electrical connections (in.) screw terminal block
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- Valve designed for cycling (not constantly powered on) applications
- Quick fit pushbutton powerhead makes it easy to remove for service
- Innovative motor technology offers silent operation, water hammer resist and longer life
- Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
- Easy to install and operate
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 13 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Straight
- Installed on LP gas motor fuel lines for forklift systems up to 100 lb. gas capacity
- One-piece hot forged brass construction
- Internal guiding to prevent being jammed
- Tamper-proof stem
- DOT container type
- 3/4" MNPT container connection
- 375 PSIG discharge setting
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Single zone switching relay should be standard equipment for every installer. No matter what type of job, our single zone switching relay replaces every brand made by every manufacturer. The single zone switching relays are compatible with conventional and programmable thermostats, ul listed and come with a 3-year warranty. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups.
- Compact design
- UL and CSA approved
- 3 year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Use this 1/2 in. hot water extender mixing valve with your boilers and water heaters. This valve features a dial adjustment cap, stainless still springs, solder connections, thermostat and a lead-free brass body. It is hydraulically operated and opens a spring-loaded check in the cold water inlet to allow hot and cold water to mix. It's temperature range is 120 to 160 degrees F.
- Lead free brass body construction
- Solder connections
- Thermostat assembly is easy to maintain, remove and replace
- Dial adjustment cap
- Low pressure drop
- Adjustable knob for temperature control
This non-handed bi-fold door is made from 24-gauge steel. It includes a half-louvered style, a baked enamel exterior, and complete track and hardware.
Sizes
The finished opening size for this bifold door is 42" x 80". However, its actual size is 41-1/2" x 78-1/2".
- Made of 24-gauge steel for durability
- Features a stylish half-louvered style design
- Baked enamel exterior creates a neat appearance
- Comes with complete track and hardware for easy installation