Searched for "40141616"

Honeywell Home's 802360JA/U is a 24-Volt replacement motor for V8043/44 zone valve. It is the ideal choice for contractors because of its easy installation. When it comes to top quality, Honeywell Home's zone valves can be trusted.

• Valve includes motor mounting screw and lead connectors
• Used with V8043A, V8043E, and V8043F
• Frequency-50 Hz, 60 Hz
• 24-Volt electrical connections
• Electrical connections - 6 in. leads; 152 mm leads

AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.

• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
• Features dual purpose mixing or diverting values
• Lead free products have products numbers end in LF
• Available temperature gauge adapter in lead-free brass material with EPDM O-ring
• Maximum safe operating pressure (psi)150 psi
• Minimum flow rate (GPM) 0.5 GPM
• Includes check valves on hot and cold ports

• Straight
• Installed on LP gas motor fuel lines for forklift systems up to 100 lb. gas capacity
• One-piece hot forged brass construction
• Internal guiding to prevent being jammed
• Tamper-proof stem
• DOT container type
• 3/4" MNPT container connection
• 375 PSIG discharge setting
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Patent no. 5,988,201
• Light weight
• Proven durability
• Easy to install
• No clog vent
• 360 degree adjustable collar ring for installation flexibility
• Stainless steel concentrator which eliminates gurgling noise

Danfoss Aveo Sensors, Electronic, Sensor type. Easy To Use. Thermostatic Radiator Valve. Built in Tamper Proof. 015G4290. Mfg #015G4290

• Easy To Use
• Thermostatic Radiator Valve
• Built in Tamper Proof
• 015G4290

The 5000 Series Mixing Valve is a dual purpose mixing or diverting valve. It is ASSE 1017 approved, providing shut-off reliability on either a hot or cold water supply failure. The high flow and low headloss characteristics make the 5000 Series ideal for domestic water, radiant applications, installations with large variations in flow rate and supply conditions, and installations requiring tightly controlled water temperature. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature throughout the extended 85Ëš-150ËšF range. The 5000 Series provides fail-safe security and the ultimate performance in a mixing valve.

• Fail-Safe on Hot or Cold Supply Failure
• Delivers Stable Mixed Water Temperature
• Outlet temperature strip
• ASSE 1017 Certified
• Dual Purpose Mixing or Diverting Valve
• Ideal for Domestic Water and Radiant Applications
• Tamper-Proof Cap
• To be used with: low temperature and radiant systems, domestic hot water

This 1/2 in. high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union threaded inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).

• Tight seating check valve
• Purge lever
• High capacity
• Stainless steel strainer
• Union threaded inlet connection
• Used to maintain water pressure in commercial and residential hydronic heating systems at all times
• Provides make-up water to the system in the event of system leaks

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Electrical connections (in.) screw terminal block
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• Valve designed for cycling (not constantly powered on) applications
• Quick fit pushbutton powerhead makes it easy to remove for service
• Innovative motor technology offers silent operation, water hammer resist and longer life
• Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
• Easy to install and operate

Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.

• Bellows or globe valve construction ensures positive shut-off and leak proof operation
• Easy to install
• Manual open (bypass) lever
• 24 VAC powered with isolated end switch

Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.

All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils.  To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.

Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.

• All models may be installed without disassembling the valve
• Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
• Valve returns to automatic position when power is restored
• Compact construction for easy installation

Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.

• Standard checkout procedure
• Robust push terminals
• Common-Sense LEDs
• Clean, professional installation

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

Honeywell AMX series Direct Connect reduces water heater installation time as the cold and hot port position eliminates the need for typical elbows and tees. New design requires a maximum of just two sweat connections. Requires fewer parts than previous models.

• Designed to be directly installed on water heater hot outlet port
• Offers constant water temperature under changing operating conditions
• Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
• Features brass/stainless construction and Teflon coated of wear surfaces
• Alternate hot port bypasses hot water directly from the tank to non-mixed temperature applications
• Maximum safe operating pressure 150 psi
• Operating temperature range (F)33 degree F to 80 degree F (cold water inlet); 100 degree F to 212 degree F (hot water inlet)
• Minimum flow rate (GPM) 0.25 GPM; recirculation port: 1/2 in. NPT; alternate hot port: 1/2 in. NPT
• Fluid temperature (F) mixed water supply--100 degree F to 145 degree F
• Capacity 2.3 Cv

The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.

• Replaces 3 components; eliminates 2 leak paths; saves nearly 20 minutes in labor
• Eliminates assemblies needed to isolate and drain any portion of a piped system
• Avoids reduced port alternatives
• Certified to NSF/ANSI 61 & 372
• Reversible handle for added versatility
• Exclusive adjustable flow path allows for draining from either side of the ball

• 90 Degree Safety Filler Valve with AUTO & MANUAL Shutoff Valve
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.

• Rapid purging and filling with over one million BTU withdrawal capacity
• Tri-lobular one-piece forged aluminum handwheel
• Double o-ring stem seal for improved leak resistance
• Pre-applied sealant
• Quality o-ring check valve seat; opens only with positive seal
• Cylinder capacity: 40 lbs
• Container Connection: 3/4" 14 NGT
• Outlet Connection: Type 1 ACME and POL
• Relief Setting: 375 PSIG
• Dip Tube: 6.4"

Nibco ACR Copper Reducer Bushing. 0.88 X 0.75" Od. NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #108286

• 0.88 X 0.75" Od
• NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
• Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
• ACR Copper Reducer Bushing

Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.

• Bellows or globe valve construction ensures positive shut-off and leak proof operation
• Easy to install
• Manual open (bypass) lever
• 24 VAC powered with isolated end switch

3 ZONE VALVE CONTROL

• Controls (3) Zones
• Built in Switchable Priority
• External Indicator Lights
• Simplified Wiring

Nibco ACR Copper Coupling

• 0.5" Tubing
• Dezincification Resistant
• NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
• With Stop
• Mfg #039923306944
• 0.5" Tubing
• Dezincification Resistant
• NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
• With Stop

Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.

• Compact design
• UL and CSA approved
• 3-year warranty
• Fuse protected
• Simplified wiring for ease of installation
• Premium sealed relays

AM-1 series adjusts, maintains and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.

• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
• Features dual purpose mixing or diverting values
• Lead free products have products numbers end in LF
• Available temperature gauge adapter in lead-free brass material with EPDM O-ring
• Maximum safe operating pressure (psi)150 psi
• Minimum flow rate (gpm) 0.5 GPM
• Includes check valves on hot and cold ports

AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.

• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
• Features dual purpose mixing or diverting values
• Lead free products have products numbers end in LF
• Available temperature gauge adapter in lead-free brass material with EPDM O-ring
• Maximum safe operating pressure (psi)150 psi
• Minimum flow rate (GPM) 0.5 GPM
• Includes check valves on hot and cold ports