Searched for "40140000"
- Replacement Cartridge Assembly For Taco 007 Cast Iron Circulators
- Repair Part
- Select 007 Pump Models
- 005 Pump Model 005-F2-4
- Cast Iron
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Easily Isolates the Pump for Replacement
- Replaces 8 components, eliminates 7 leak paths, saves approximately one hour in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents Electrolysis and Eliminates Galvanic Corrosion
- Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
The Symmons W-400 Washing Machine Valve is constructed of solid brass and stainless steel and carries a limited lifetime consumer warranty. This valve only assembly removes water supply pressure between cycles or during vacations to prevent burst hoses that could lead to damaging floods. This laundry shutoff valve has an easy to use single lever to shut off both cold and hot water simultaneously.
- On/off settings
- Removes water supply pressure to limit danger of flooding from bursting supply hoses
- Single lever handle to manually control both hot and cold water supply to machine
- ½ inch sweat union ell connections
- 1 and ½ inch drain connection
- Constructed of brass, stainless steel, and plastic
- Includes a brass sump pan
- Limited lifetime consumer warranty; 10 year warranty for commercial use
Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.
- Isolated end switch
- 24 VAC powered
- For Taco series 570 zone valves (570, 571, 572, and 573)
- Allows for service of valve without removing it
This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
3/4 cast iron circulator flange. Heavy-duty and can be used on competing models. Genuine factory replacement.
- Universal type flange fits bell and Gossett 100 series, Armstrong Pumps
- Fits Armstrong Astro 2 series
- Can be used on B & G circulators
- Factory replacement
- Heavy-duty
- Includes nuts and bolts
- Includes gaskets
- Fits on Armstrong S & H circulators
- Fits taco "00" series
- Fits Grundfos "UP" series
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
Long lasting metal fin-tool that straightens and cleans condenser and evaporator fins. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- 1 tool for all units
- Heavy-duty spring wire bristles automatically adjust to all fin spacing's
- Exclusive tension adjustment band is featured to allow maximum rigidity and ease of operation
- Straightens most severely damaged fins
- Stainless steel teeth
- Cushioned red handle to protect your knuckles
- Straightens damaged condenser and evaporator fins quickly and easily
- Increases air conditioner efficiency
- Helps keep air conditioners, condensing units running efficiently
- Works on most air conditioning and refrigeration coils
The DELAVAN 0.75 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 0.85 60A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 1.20 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
Designed to isolate circulator pump during repairs or replacement. Pressure rated at 600 WOG. Chrome plated brass ball with virgin PTFE seats. Bottom loaded, blowout proof stem. 1/2 turn operation. Flange mounting holes 4-5/8 in. centers.
- Fits most circulator pumps
- Includes mounting nuts and bolts
- Durable brass body and flange
- High pressure rating (600 WOG for solder and threaded and 250 WOG for press)
- Adjustable packing and gland
- EPDM O-rings to avoid leaks at installation
- Optional tee handle included
This 3/4 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of chrome plated body, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
The DELAVAN 1.00 60B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 0.60 60B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The Delavan .60 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Boiler replacement part
- For use with an oil-burning appliance
- Brass body
- Stainless-steel, hollow orifice
3-5/32" Centers
- Fits B&G Series 100B,PRAB,NBF-22,NBF-12,NBF-36,PL-36B,PL-55B and Armstrong Astro 30 and S-25 Pumps
- High-quality bronze body enables long-term use
- Features 150 maximum PSI
- Comes with 2 flanges
- Works well with Armstrong Astro 30 and S-25 pumps, Bell & Gossett series 100B, PRAB, NBF-22, NBF-12, NBF-36, PL-36B, and PL-55B models
Packard flat igniters offer an efficient , stronger, reliable hot surface silicon nitride design. These igniters are manufactured from the highest quality materials. Bacled by designs that are tried and tested to perform. Universal replacement minimizes inventory.
- Universal round silicon nitride igniter kit, includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters
- Superior gas lighting ability and lower power consumption
- Faster time to temperature response and stronger more durable design
- More robust in transit
The DELAVAN 1.00 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 0.65 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
High Capacity Thermostatic Radiator Valves with T104 Actuators provide control of temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating. Designed with the higher capacity normally required by North American heating systems.
- Controller with combined remote setpoint and sensor mounted on a wall. Setpoint/sensor connect with a capillary tube to an actuator, which mounts on the valve body. For V110 valves
- Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems
- Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
- All working parts are replaceable while valve remains in service, in-line, under pressure
- Controls include sensor, set point dial and valve actuator; components may be integral or connected by capillary tubes
- Require no electrical connections
- Meet ASHRAE standard 102-1989
- 40 mm collar diameter
- Temperature Range (F) 48 degree F to 79 degree F
- Capillary Length (ft)6 ft. 8 in.
The Delavan .85 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Boiler replacement part
- For use with an oil-burning appliance
- Brass body
- Stainless-steel, hollow orifice
The DELAVAN 0.85 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified