Searched for "31162400"
The new Red Head 9.5 fl. oz. A7 plus Concrete Adhesive Anchor features a fast cure formula that sets in just 10-minutes and fully cures in 45-minutes at 70°F. This high performance adhesive anchor meets the highest standards of building codes and is approved for cracked and uncracked concrete and seismic applications. The most versatile formula is easy to dispense at all temperatures, is moisture resistant for damp or submerged applications.
- Fast cure: sets in 10-minutes and fully cures in 45-minutes (at 7°)
- Use in concrete and masonry applications including threaded rod anchoring and rebar doweling
- Building code compliant for cracked, uncracked concrete and seismic applications
- High strength formula
- Dispense with standard medium-duty dispensing gun
- For use in all weather
- Includes a mixing nozzle for easy application
- Easy to dispense
This is a rivet than attaches the carrier end to the tube balance. It is a specific size for specific carriers. A special rivet crimping pliers tool is available to attach these.
- Use to attach carrier end to balance rod
- Made of aluminum
- Durable
- Light weight
Rivet to attach top and botttom end bracket guides to 9/16" wide window channel balances. There is a balance end rivet crimping tool avaiable for the professional when attaching many ends to many balances. Consider ordering balances with the end brackets already attached as your balance may be weaken due to use.
- Made of steel
- To attach top end brackets
- To attach bottom end brackets
- Standard duty
This is a window balance sash clip. There is a specific size spec for this to get the proper replacement. Window brand name or age does not determine replacement.
- Right handed
- Non-reversible
- White
- Plastic
GRK Fasteners RSS screw is made from Climatek coated and hardened steel. Its sharp threads and point bite instantly into material (including hardwood), reducing the splitting effect caused by smaller shanks. Its washer type head has no sharp edges like conventional lag screws and the added shoulder underneath the washer has the ability to center the RSS screw in predrilled hardware.
- Ideal for ledger boards and more
- Self-tapping
- W-cut thread design
- May be used as a lag screw alternative
Special screw to attach window face guides. This is made of steel. The finish is zinc plated.
- Flat head
- Sheet metal screw
- Phillips head
- #6 x 3/8 in. size
This is a window balance sash clip. There is a specific size spec for this to get the proper replacement. Window brand name or age does not determine replacement.
- Left handed
- Non-reversible
- White
- Plastic
Rivet to attach top and botttom end bracket guides to 13/32" wide window channel balances. There is a balance end rivet crimping tool avaiable for the professional when attaching many ends to many balances. Consider ordering balances with the end brackets already attached as your balance may be weaken due to use.
- Made of steel
- To attach top end brackets
- To attach bottom end brackets
- Standard duty
This is a window balance take out clip. Used with channel balances. This is a specific size spec for many channel balances.
- For Silver Line and other brand windows
- Used to remove balance from window
- Non-handed
- Steel
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, br.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 9/32 in. pilot hole recommended
- T40 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Rosettes are used to secure ceiling and wall panels in manufactured housing. They can be painted to match existing wallboard colors. Can be used to replace existing rosette or for new installation.
- White nylon rosettes
- Used to secure ceiling and wall paneling
- Can be painted to desired color
- Contains 10 rosettes and 10 screws
- Easy to install
Use the DANCO Clear Ceiling/Wall Rosettes to secure ceiling boards in your mobile home or RV. The clear rosettes can be painted to match your decor. It is crafted from plastic for durability and reliable performance.
- Durable plastic construction
- Clear rosettes can be painted to your desired color
- Used to secure ceiling and all board
- Designed for mobile homes
- Includes 10 rosettes and 10 screws
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, br.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, br.
- 9/32 in. pilot hole recommended
- T40 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 9/32 in. pilot hole recommended
- T40 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 50 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 9/32 in. pilot hole recommended
- T40 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, br.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Assortment contains various sizes of split tension pins zinc plated. These are also commonly referred to as spring pins. A tension (spring) pin is a mechanical fastener that secures the position of 2 or more parts relative to each other. The pins have a body diameter which is larger than the hole diameter, and a chamfer on one or both ends to facilitate starting the pin into the hole.
- Kit contains 25-pieces of each of the following sizes: 1/16 in. x 3/8 in., 1/2 in., 3/4 in. 1/4 in. x 1 in., 2 in., 3 in 1/8 in. x 3/8 in., 3/4 in., 1-1/2 in. 3/16 in. x 1/2 in., 1 in., 2 in. 3/32 in. x 3/8 in., 3/4 in., 1 in. 5/32 in. x 1/2 in., 1 in., 1-1/2 in. 5/64 in. x 3/8 in., 1/2 in., 3/4 in. 7/32 in. x 3/4 in., 1-1/2 in., 2 in.
- Material: spring steel
- Zinc plated
- Metal drawer dimensions: 18 in. W x 12 in. D x 3 in. H
- Use with 4-drawer metal slide rack: HD PRO OMSID# 316536270
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, brass, cast iron and plastic. Made from hardened steel (Rc45 minimum case hardness). For best performance, the material in which the threads are cutting should be of a lower hardness than the RC45 screws by 10-20Rc. Pilot holes required.
- 9/32 in. pilot hole recommended
- T40 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack
Floorboard screws are designed for attaching wood floors into truck trailers. The flat head design of floorboard screws provide a flush surface in countersunk holes. Also used in applications that require fastening to heavy-gauge sheet metal, aluminum, br.
- 7/32 in. pilot hole recommended
- T30 driver bit size
- Material: hardened steel (Rc 45 minimum case hardness)
- 100 per pack