Drain Cleaning Accessories

The down head fitting is designed to convert standard cutters into down head cutters. Attach the down head fitting to the female end of the cable and attach your cutter. Easy to attach.

• For 1-1/4 in. - 2 in. drain lines
• For use in 5/16 in. and 3/8 in. drain cables
• Strong and durable
• Easily attaches with a screwdriver
• Helps to guide the cable down to the stoppage, not up toward the stack
• Screw to attached cutter is included

General's Flexible Arrow Head is the regular Arrow Head only smaller and attached to a spring for flexibility. The Flexible Arrow Head is great for opening small drain lines. A must have for hand held drain cleaners. The down head fitting pulls the cable downward in the pipe instead of up the stack. Easily retrieves loose objects.

• For 1-1/4 in. - 2 in. drain lines
• Starting drill (for sharp turns in small lines)
• Perfect for kitchen sinks, bathroom sinks and tubs, laundry tub
• Acts like a leader for sharp bends in pipes
• E-coated to protect against rust
• For use on 5/16 in. and 3/8 in. cables

The Down Head Boring Gimlet is used for removing loose objects in the drain line. Its design allows it to go down the waste and not up the stack. Easily fits into the female connector on 5/16 in. and 3/8 in. cables.

• Open spring helps grab onto and remove loose objects
• Goes down waste, not up stack
• Used on 5/16 in. and 3/8 in. cable diameters
• Effective in 1-1/2 in. to 3 in. lines
• Cutters are subject to severe wear and are repaired or replaced within 1 year only if a flaw in the material causes breakage
• Snake-oil preserves and protects your sewer cables against rust and corrosion

The MRCS cutter set is used for General's Mini-Rooter line of drain cleaners. This cutter set is perfect for opening small drain lines. For use on General's cables.

• For 2 in. - 3 in. drain lines
• Mini-rooter cutter set (includes Arrow Head, 1-1/2 in. U-Cutter, 2 in. Side Cutter Blade and Boring Gimlet)
• For 5/16 in. 3/8 in. and 1/2 in. cables
• E-coated to protect against rust
• For commercial and residential use
• Perfect for kitchen sinks, bathroom sinks and tubs, laundry tubs

The Boring Gimlet is used for removing loose objects in the drain line. It easily fits into the female connector on 5/16 in. and 3/8 in. cables. The BG is also available in a variety of cutter sets.

• Open spring helps grab on to and remove loose objects
• Used on 5/16 in. and 3/8 in. diameter cable
• Effective in 1-1/2 in. to 3 in. lines
• Cutters are subject to severe wear and are repaired or replaced within one year only if a flaw in the material causes breakage
• E-coated to protect against rust
• Simple and easy to use

Get full use out of your RIDGID cables with this model A-13 3/8 in. cable coupling key (catalog number 59230). This pin key fits 3/8 in. and 1/2 in. cables and allowsquick and easy attachment and release of both RIDGID drain cleaning auger heads and cutter tools to cables. RIDGID - Built For Those Who Know.

• Coupling pin key is used to attach tools to cable
• Coupling pin key is used to release tools from cable
• Can be used with 3/8 inch cables
• Can be used with 1/2 inch cables
• Convenient loop to grasp pin and store on a hook if desired
• Included also with other RIDGID drain cleaning tool sets
• Made of steel
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. Its excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.

• For 3 in. - 8 in. drain lines
• For use on 1/2 in. cables
• Six self-sharpening blades dig into encrusted debris and root easily grinding up stoppages and scale without risking pipe damage
• Perfectly balanced ClogChopper automatically negotiates multiple, tricky bends maintaining a central line position and minimizing pipe wall, elbow, connection and joint damage
• Excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs
• Durable enough to handle years of demanding use in residential and commercial applications

The 5 piece cutter set has an assortment of cutter tips designed to get water flowing, scrape the walls of the pipe and retrieve items out of the pipe. Slides into female connector on the cable and is held there by a screw and lock washer. The set includes: arrow head, flexible arrow head, 1-1/4 in. side cutter blade, boring gimlet, and down head boring gimlet.

• For 2 in. - 4 in. lines
• Flexible arrow head (FAH): starting drill to get water flowing
• 1-1/4 in. side cutter blade (1-1/4SCB): used for cutting through debris and scraping the walls of the pipe
• Boring gimlet (BG): used for removing loose objects
• E-coated to protect against rust
• Snake-Oil preserves and protects your sewer cables against rust and corrosion

General's JRCS cutter set is part of the Sewerooter T-3 packages. The cutters in this set cover a wide range of applications in small to medium drain lines. Durable and easy to use.

• For 2 in. 4 in. drain lines
• For 3/8 in. and 1/2 in. cables
• Junior cutter set (includes arrow head, 1-1/2 u-cutter, 2 & 3 side cutter blade, 3 rotary saw blade, small retieving tool and 13 flexible leader)
• Easily attaches to the female end of the cable
• Wide range of sises, from the smaller arrow head to the 3 in. rotary saw blade
• E-coated (except for the LE-1) to protect from rust

The SRCS cutter set covers a wide range of applications for the 5/8 in. to 3/4 in. drain cable. From the Spear Head to the Retriever tool, this cutter set has it all. No coupling key needed to install cutters.

• For general cables
• Use the large retrieving tool to pull large objects out of the drain line
• E-coated to help prevent rust
• Spear head is galvanized to help prevent rust
• RTR-1 is made of high carbon spring steel
• Cutters available separately

Clear unwanted grease clogs, with the RIDGID T-205 1-3/8 in. "C" Grease Cutter. This strong and versatile auger breaks up tough grease blockages in kitchen sinks, lavatory sinks, slop sinks, drain lines and disposal waste lines. It has a 1-3/8 in. diameter and fits 3/8 in. drum and 5/8 in. sectional cables. The T-205 cutter is designed for use with C-4, C-6, C-6 IC, C-7, C-8, C-9, C-31, C-32, C-33, C-31 IW, C-32 IW, and C-33 IW drain snake cables. Simply slide the cutter on the drain cleaning cable for easy installation. Use this powerful sewer pipe cleaning tool with RIDGID K-40 and K-45 Sink Machines, K-400 and K-3800 Drum Machines, and K-50 Sectional Machine. RIDGID - Built For Those Who Know.

• The T-205 C cutter has a 1-3/8 in. Dai
• T-205 grease cutter fits 3/8 in. drum and 5/8 in. sectional cables (sold separately)
• Designed for use with C-4, C-6, C-6 IC, C-7, C-8, C-9, C-31, C-32, C-33, C-31 IW, C-32 IW, and C-33 IW drain auger cables (sold separately)
• Ideal for cleaning grease clogs in kitchen sinks, lavatory sinks, slop sinks and disposal waste lines
• Simply slide the cutter on the drain cleaning cable for easy installation
• For use on RIDGID K-40 sink machine, K-45 sink machine, K-400 drum machine, K-3800 drum machine and K-50 sectional machine (sold separately)
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

The A-12 7/8 in.- 1 1/4 in. Coupling Pin is used with 7/8 in to 1/2 in. cable to attach and detach attachments for drain cleaning. It is used with pipe cleaning fittings. This is the insert pin used for RIDGID Drain Cleaning Machine cable attachments.

• Made of steel
• Used with RIDGID drain cleaning machine cable attachments
• Also called an insert pin
• Silver color
• 1/2 in. cable pin key
• Used with various drain cables

The RIDGID K-50 is a portable Drain Cleaning Machine designed to clean 11/4 in. to 4 in. drain lines. Applications include sink, shower and floor drains. Capable of running three different size cables: 5/16 in., 3/8 in. and 5/8 in.

• Weighs less than 40 lbs
• Pull handle down and cable spins at 400 RPM
• Release handle, cable stops instantly
• Equipped with 1/6 HP motor; 115-volt models CSA approved

The BrassCraft Hair Snake is the fast and easy way to clear clogged and slow running drains. This durable plastic tool is suitable for use in many residential drains. Clear clogged sink and shower drains in minutes, chemical free.

• 20 in. L
• Durable polymer construction
• Environmentally safe
• Safe, reliable and easy to use
• For most household sink, shower and tub drains
• No chemicals required
• 20 in. L, with 19 in. of barbed length

General's R-10CS 6-piece cutter set with 'R' connectors for 7/8 in. sectional cables (Compatible with Ridgid cables). Tough and durable, this cutter set will cut through most stoppages. Easy to install.

• For 3 in. to 4 in. drain lines
• Great for roof vents
• Cable stops rotating the cutter as soon as you lift the handle, so there's no additional torque buildup
• E-coated to help prevent rust
• Coupling key included
• Compatible with Ridgid cables

The Milwaukee all purpose open wind sectional cable is constructed of industrial steel spring. The cable carries power through the end for maximum clog crushing force. The drain cables are compatible with the Milwaukee M18 FUEL sewer sectional machine with CABLE-DRIVE (2871) and other professional drain cleaning machines. These drain cleaning cables are backed by a 2-year warranty from defect or breakage.

• Industrial steel spring
• Interlocking cable connectors with pin key release
• Steel connectors
• Stainless steel release pin and spring
• All purpose wind
• Works with Milwaukee M18 FUEL sewer sectional machine (2871-22)
• 2-year cable warranty
• Includes: 7/8 in. x 15 in. all purpose open wind sectional cable

The RIDGID 63030 is a T-210 spade cutter cable head. This grease cutter is made to use with 3/8 in. and 1/2 in. cables with male quick tool ends. This cutter is used to catch the debris on the sides of pipe that are missed by the straight auger. This cutter fits C-4, C-6, C-6IC, C-7, C-8, C-9, C-31, C-31IW, C-32, C-33, C-33IW, C-44IW and C-45IW cables. This cutter is for use in kitchen sinks, lavatory sinks, shop sinks, and disposal waste lines, it grabs debris and twists them onto the head of the cable. The cable head feature a quick locking tool end for a fast and easy change out during use.

• For 3/8 in. and 1/2 in. cables with male ends
• Drain maintenance accessory
• Fits C-33, C-4, C-45IW, C-6IC , C-7, C-9 cables (not included)
• For following up after augers have been used and to open up floor drains
• For use with the K-50 sectional machine (not included)
• 1 in. Dia.

The Arrow Head is used as a starting drill. It gets the water flowing. It easily fits into the female connector on 5/16 in., 3/8 in., 1/2 in., and 9/16 in. cables. Also available in a cutter set.

• For 2 in. - 3 in. drain lines
• Use as a starting drill to get water flowing through the pipe
• Not for tree roots
• Attaches to General's cables
• Is available in the HECS cutter set
• Easy to use starting drill

RIDGID offers a wide variety of FlexShaft accessories in different sizes for the most cleaning efficiency on the jobsite. Depending on pipe size, pipe material and blockage, there are different chain Knockers and Brushes for every job. Knowing when to choose Brushes or standard, carbide tipped or penetrating head chain Knockers can help you get the best performance out of your machine. This replacement accessory is a smooth, single-chain knocker (catalog number 64293) for use with RIDGID FlexShaft K9-102 and K9-12 drain cleaning machines and attaches to the end of the 1/4 in. cable (not included). This style knocker is designed to clear grease, hair and other soft blockages found in sink, tub, shower and urinal pipes. It expands to clear up to 2 in. pipes. RIDGID - Built For Those Who Know.

• For use with 1/4 in. cable on both FlexShaft K9-12 and K9-102 drain cleaning machines
• Smooth chain knockers clean drains wall to wall in all soft walled pipes and are specific and efficient in removing grease, hair and other soft blockages
• Smooth, single chain knocker expands to clean the full circumference of up to 2 inch pipes
• For use in PVC, ABS, corrugated, clay, copper, galvanized and cast iron pipe
• Made of carbon steel and affixes to cable via set screws and a 3mm hex key
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

In extreme stoppages remove the trap, attach a half inch reducing coupling to drain pipe and connect the Ram. Attach those between the faucet and the check valve on the Ram. Fill the vent with water and pull the trigger.

• For 1-1/2 in. - 4 in. drain lines
• Measures 3/8 in. x 4 ft. long
• For extreme blockages
• Two female connectors
• Included in the KR-D package
• Black reinforced hose

RIDGID offers a wide variety of FlexShaft accessories in different sizes for the most cleaning efficiency on the jobsite. Depending on pipe size, pipe material and blockage, there are different chain Knockers and Brushes for every job. Knowing when to choose Brushes or standard, carbide tipped or penetrating head chain Knockers can help you get the best performance out of your machine. This replacement accessory is carbide-tipped, double chain knocker (catalog number 64288) for use with the RIDGID FlexShaft K9-102 drain cleaning machines and attaches to the end of the 1/4 in. cable (not included). This style knocker is ideal for removing scale and light roots as well other grease and soft blockages in hard wall pipe types. RIDGID - Built For Those Who Know.

• For use with 1/4 in. cable on FlexShaft K9-102 drain cleaning machine
• Carbide tipped, double chain knockers clean and remove scale, light roots, grease and other soft blockages in hard wall pipes
• Carbide tipped, double chain knockers expand to clean the full circumference in 2 inch hard wall pipes
• For use in copper, galvanized and cast iron pipes
• Not for use with thin-walled plastic pipe, PVC, ABS or corrugated
• Made of carbon steel and affixes to cable via set screws and a 3mm hex key
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

This RIDGID A62 Cable Kit is a drain cleaner cable kit. It has a total of 75 ft. of C10 cable. The kit includes 5 sections of cable. RIDGID - Built For Those Who Know.

• Standard equipment cable
• A-8 cable carrier included
• 5 sections of C-10, 7/8 in. x 15 in. cable included
• Cable is used with the K-60-SE sectional drain machine
• Contains sections of cable in one place
• Handy for transporting drain cleaning cable
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

RIDGID offers a wide variety of FlexShaft accessories in different sizes for the most cleaning efficiency on the jobsite. Depending on pipe size, pipe material and blockage, there are different chain Knockers and Brushes for every job. Knowing when to choose Brushes or standard, carbide tipped or penetrating head chain Knockers can help you get the best performance out of your machine. This replacement accessory is a smooth, double-chain knocker (catalog number 64298) for use with RIDGID FlexShaft K9-102 and K9-12 drain cleaning machines and attaches to the end of the 1/4 in. cable (not included). This style knocker is designed to clear grease, hair and other soft blockages found in sink, tub, shower and urinal pipes. It expands to clear up to 2 in. pipes. RIDGID - Built For Those Who Know.

• For use with 1/4 in. cable on both FlexShaft K9-12 and K9-102 drain cleaning machines
• Smooth chain knockers clean drains wall to wall in all soft walled pipes and are specific and efficient in removing grease, hair and other soft blockages
• Smooth, double chain knocker expands to clean the full circumference of up to 2 inch pipes
• For use in PVC, ABS, corrugated, clay, copper, galvanized and cast iron pipe
• Made of carbon steel and affixes to cable via set screws and a 3mm hex key
• Lifetime Warranty: RIDGID tools are warranted to be free of defects in workmanship and material. See manufacture warranty for details.

The 1/4 in. down head is the replacement head for the 1/4 in. HE style cables. For use in the Super-Vee, Power-Vee and Handylectric line of drain cleaners. The drop head pulls the cable down the line and not up toward the stack.

• For 1-1/2 in. drain lines
• The 1/4DH must be crimped onto the cable
• Durable spring steel
• Plated to be rust resistant
• Not for use on floor model drain cables
• Cutters are not available for 1/4 in. cable