Searched for "milwaukee"
The MILWAUKEE M12 FORCE LOGIC Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12 press tool features a one-handed, in-line design enabling users to operate the tool nearly anywhere they can fit their arm. Built-in REDLINK technology enables the plumbing press tool to monitor the force output, delivering users with quality connections. A visual indicator alerts users when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows users to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with Milwaukee press jaws, this tool delivers quality press connections on all major fitting brands. The FORCE LOGIC press tool is powered by Milwaukee's M12 REDLITHIUM batteries, allowing users to Cut, Fasten and Connect on One System. In addition to the press tool, this kit includes two M12 REDLITHIUM CP1.5 battery packs, 1/2 in., 3/4 in. and 1 in. copper jaws, an M12 REDLITHIUM Charger, and a carrying case.
- Enables Connections on Copper, PEX, Black Iron, Stainless Steel, & more
- Features the best calibration standard in the industry
- Batteries recharge in 30 minutes
- Cut, fasten and connect all on one system
- Performs 32,000 crimps between service inspections
- 5-year tool, 2-year battery, 2 year jaw warranty
- Compatible with all M12 batteries & chargers
- Tool warranty: 5 years
- 15 degree offset connector for drain access under fixed faucets
- Includes: (1) M12 Force Logic Press Tool (2473-20), (1) 1/2 in. jaw (49-16-2450), (1) 3/4 in. jaw (49-16-2451), (1) 1 in. jaw (49-16-2452), (2) M12 REDLITHIUM Compact 1.5 ah Battery (48-11-2401), (1) M12 REDLITHIUM Charger (48-59-2401), and Carrying Case.
The MILWAUKEE M12 Copper Tubing Cutter is the industry's first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM for unmatched cutting speed. The included M12 Battery and ultra-efficient gearing allow users to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8" to 1" (OD from ½" to 1-1/8"). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2" clearance, and the lightweight, the inline design provides users with a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps users monitor the charge precisely, so there's less downtime on the job. In addition to the M12 Copper Tubing Cutter, this kit includes an M12 Battery Charger and an M12 REDLITHIUM CP1.5 Battery Pack.
- Cuts copper tubing with as little as 1-1/2" of clearance
- Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters
- Metal Cutting Head is corrosion and rust resistant and sealed for water protection
- Electronic Overload Protetion along with uni-body construction for increased durability
- Inline Design reduces wrist drain in confined spaces
- Built-in LED light illuminates the lie of cut for better visibility
- 5 Year Tool Warranty
- Onboard battery fuel gauge: displays remaining runtime
- Includes: (1) M12 cordless copper tubing cutter (2471-20), (1) M12 Lithium-ion battery charger (48-59-2401), (1) M12 REDLITHIUM CP1.5 battery pack (48-11-2401), (1) carrying case
The MILWAUKEE M18 FORCE LOGIC Press Tool with ONE-KEY with 1/2"-2" Copper Press Jaws is the industry's first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all Milwaukee press tools, the in-line design with a forward hand position unlocks the user's ability to press with one hand and will fit nearly anywhere they can fit their arm. Equipped with REDLINK electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can't complete. This press tool is ONE-KEY enabled, logging, and uploading data from every press for retrieval via the ONE-KEY desktop or mobile app. This allows for performance monitoring and provides users peace of mind in quality connections. With ½" to 4" capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18 REDLITHIUM CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
- Compatible with over 20 unique fitting systems
- Prepress battery check ensures tool won't start a press it can't complete
- ONE-KEY Wireless Reporting & Geofencing Tool Management
- ONE- KEY: Monitor and report successful operation from desktop and mobile devices
- ONE-KEY: Industry's Largest Tracking Network
- Brushless motor enables 20% more run time & 10 % faster cycles
- In-line design optimized for one-handed presses
- Capacity: 1/2 in. - 4 in. dependent on material and fitting system ( (Reference Compatibility Chart)
- Force: 7,200 lbs
- Calibration Interval: 50,000 Cycles
- Cycle Time: 4 Seconds
- Includes: (1) M18 Force Logic Press Tool (2922-20), (1) M18 & M12 Muti- Voltage Charger (48-59-1812), (2) M18 CP 2.0 AH Battery Packs (48-11-1820), (1) 1/2 in. Jaw, (1) 3/4 in Jaw. (1) 1in Jaw, (1) 1-1/2 in. Jaw and (1) 2 in. Jaw and (1) Carrying Case
The MILWAUKEE M12 Copper Tubing Cutter is the industry's first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM for unmatched cutting speed. The M12 Battery (sold separately) and ultra-efficient gearing allow users to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8" to 1" (OD from ½" to 1-1/8"). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2" clearance, and the lightweight, the inline design provides users with a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps users monitor the charge precisely, so there's less downtime on the job.
- Cuts copper tubing with as little as 1-1/2 in. of clearance
- Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters
- Metal Cutting Head is corrosion and rust resistant and sealed for water protection
- Electronic Overload Protetion along with uni-body construction for increased durability
- Inline Design reduces wrist drain in confined spaces
- Built-in LED light illuminates the lie of cut for better visibility
- 5 Year Tool Warranty
- Uses a 12-Volt lithium ion battery (not included)
- Compatible with all M12 batteries and chargers
- Includes: (1) 2471-20 M12 lithium-ion cordless copper tubing cutter
- Includes: (1) 2471-20 M12 lithium-ion cordless copper tubing cutter
The Milwaukee Copper Cutting Wheels (2-Pack) are ideal for cutting copper tubing. The wheels feature hardened steel construction with black oxide for durability, and the convex design of the blade helps prevent chipping. Copper Cutter Wheel 2 Pack. Includes 2 replacement cutter wheels. For use with Milwaukee 12V Copper Tubing Cutter model 2471. Precision machined for fast, accurate cuts. Hardened steel with black oxide for long life.
- Replacement Cutter Wheels designed for use with Milwaukee M12 12-volt copper tubing cutter model 2471 (not included)
- Hardened steel with black oxide for a long life
- Precision machined for fast, accurate cuts
- Convex blade design helps prevent chipping
- Replacement Copper Cutter Wheels (2-Pack)
- Milwaukee hardest
The MILWAUKEE M12 Plastic Pipe Shear cuts cleaner, faster, closer, and longer than traditional plastic pipe shears with over 200 cuts on one battery charge. The M12 Plastic Pipe Shear can cut through 2" schedule 80 PVC in three seconds or less. Its razor-sharp pierce-point leaves pipe and tubing clean, burr-free, and ready for installation, minimizing the time users spend on the job. Instantly open the jaw to increase productivity in repetitive cuts by using the tool's quick blade release. Users can expect more work from this cordless shear with a 3mm stainless steel blade and aluminum jaw that resists impact, water, and rust. Powered by M12 REDLITHIUM Battery, users get more power and longer run-time for maximum cuts per charge. The on-board battery fuel gauge helps monitor the charge status, so there's less downtime on the job.
- Ultra Sharp Pierce-Point delivers burr-free cuts
- Quick Blade Return: Increases productivity in repetitive cuts
- Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant
- Offset Blade Optimized for cutting installed pipe closer than traditional shears
- Variable Speed Trigger for controlled cuts in warm and cold weather
- Cuts PVC, CPVC, PEX Tubing, BlazeMaster, ABS, Non-Metallic Conduit, Rubber Hose, and more
- 5 Year Tool Warranty
- Compatible with all M12 batteries and chargers
- 5-year limited warranty
- Convenient offset blade: facilitates cutting of PVC in walls, close to walls or in the ground
- Includes: (1) 2470-20 M12 cordless lithium-ion PVC shear
The Milwaukee M12 PEX Expansion Tool features a built-in auto-rotating head delivering users with convenient one-handed operation. The expansion tool features a compact right angle design enabling users to quickly and easily install tubing in tight locations. A quick cam mechanism delivers precise, continuous expansion for 3/8 in. to 1 in. PEX connections while a paddle trigger allows users to easily reach confined spaces. All-metal gears and an integrated metal frame deliver maximum tool durability on the job site. The Milwaukee expansion tool is specifically for PEX and is built to provide users with faster, effortless installations. The cordless expansion tool is compatible with all Milwaukee M12 batteries and features a built-in fuel gauge that displays remaining run-time. In addition to the expansion tool, this kit includes 1/2 in., 3/4 in. and 1 in. PEX expansion heads, one PEX expansion cone grease, two M12 REDLITHIUM CP1.5 battery packs, an M12 Lithium-ion Battery Charger and a carrying case.
- Quick cam mechanism for fast, continuous expansion
- Compact, right angle design for use in tight locations
- Capacity: 3/8 in. to 1 in. expansion PEX connections
- Compatible with all M12 batteries
- LED work light illuminates workspace in dark locations
- Paddle trigger for easy reach in confined spaces
- All- metal gears and integrated metal frame for jobsite durability
- Run Time: 130 1/2" connections per charge
- Includes: (1) M12 cordless PEX expansion tool (2474-20), (1) 1 in. PEX expansion head (49-16-2408), (1) 3/4 in. PEX expansion head (49-16-2406), (1) 1/2 in. PEX expansion head (49-16-2404), (1) PEX expander cone grease (49-08-2400), (1) M12 lithium-ion battery charger (48-59-2401), (2) M12 REDLITHIUM battery (48-11-2401), (1) carrying case
- Battery fuel gauge displays remaining run-time
The Milwaukee M12 FUEL ProPEX Expander delivers the fastest 3/8 in. - 1 in. connections. Utilizing an auto-rotating head mechanism, the M12 FUEL ProPEX Expander provides even expansions for the most consistent installations. The new ProPEX Expander Heads with RAPID SEAL provide the fastest PEX seal for less down time before pressure testing. Access tight locations to install tubing with the compact, right angle design for fast and easy installations. All-metal gears and an integrated metal frame deliver maximum tool durability on the job site. The Power State Brushless Motor delivers the fastest expansions, yet runs cooler with no wearable components. The REDLITHIUM 2.0 Compact Battery Pack delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries, as well as best in.-class performance in extreme jobsite conditions. REDLINK PLUS intelligence ensures optimized performance and protection from overload, overheating and over-discharge. The onboard fuel gauge helps you monitor the charge more accurately, so there's less downtime on the job.
- Auto-rotating mechanism provides quick, uniform expansions
- Fastest 3/8 in. -1 in. expansions for up to 35% faster connections
- ProPEX expander heads with RAPID SEAL for up to 65% faster sealing at 45 degree
- Quick cam mechanism for fast, continuous expansion
- Built-in auto rotate mechanism for effortless, one-handed use
- Compact, right angle design for use in tight locations
- All-metal gears and integrated magnesium frame for maximum jobsite durability
- Extended dual actuating trigger for easy reach in confined spaces
- LED work light illuminates work space in dark locations
- Battery fuel gauge displays remaining run-time
- Compatible with all M12 batteries
- M12 FUEL ProPEX expander (2532-20), 1/2 in. ProPEX expander head with RAPID SEAL (49-16-2414), 3/4 in. ProPEX expander head with RAPID SEAL (49-16-2416), 1 in. ProPEX expander head with RAPID SEAL (49-16-2418), ProPEX expander cone grease (49-08-2400), carrying case
Milwaukee M12 FORCELOGIC Press Tool Kit. Smallest And Lightest At 3.8 Lbs. With Up To 5,400 Lbs. Of Force. Balanced, in-line design suitable for one-handed use. Batteries recharge in 30 minutes. Can be operated with one hand while delivering up to 5400 lbs. of force. Cut, fasten and connect all on one system. Features the best calibration standard in the industry. Performs 32,000 crimps between service inspections. 5-year tool warranty; 2-year battery/charger. Mfg #2473-20
- Smallest And Lightest At 3.8 Lbs. With Up To 5,400 Lbs. Of Force
- Balanced, in-line design suitable for one-handed use
- Batteries recharge in 30 minutes
- Can be operated with one hand while delivering up to 5400 lbs. of force
The Milwaukee 1-1/2 in. Constant Swing Copper Tubing Cutter is engineered for straighter, cleaner cuts. A 4 Roller Design delivers accurate cuts and prevents walking. For added durability and extended performance, Chrome Rollers provide best in class rust protection. An On-Board Reamer enables fast, easy debarring.
- 1/8 in. - 1-5/8 in. cut capacity
- 4 roller design
- Chrome rollers
- Smooth adjustment mechanism
- Tool-free blade change
- Extra blade included
- On-board reamer
Milwaukee IPS-P Press Jaw Kit For M12 FORCELOGIC Press Tool, 1/2", 3/4", 1". e Size Fittings For M12 Force Logic Press Tool . Jaws press Schedule 5 to 40 IPS carbon & stainless steel fittings. Press Jaws are faster than traditional pipe connection methods. Designed for M12 FORCE LOGIC Press Tool. Connect Black Iron, Stainless Steel & More. More Efficient Alternative To Welding & Threading. Controlled, Flameless Steel Connections. Creates Secure Joints in One Cycle. Easy Opening Jaw designed for one handed use. Lightest, in-line design for unrivaled access. Durable Steel Jaws Provide Outstanding Life. 2 Year Warranty. Mfg #49-16-2496
- e Size Fittings For M12â„¢ Force Logicâ„¢ Press Tool
- Jaws press Schedule 5 to 40 IPS carbon & stainless steel fittings
- Press Jaws are faster than traditional pipe connection methods
- Designed for M12â„¢ FORCE LOGICâ„¢ Press Tool
The Force Logic Press Ring Kit provides a solution that takes the advantage of press vs. sweat to the max. Pressing 2 1/2 in. - 4 in. pipes using a unique to Milwaukee 2 - hinge design provides quality connections in close quarters and the steel rings provide outstanding durability.
- Up to 10% lighter than the leading competitor
- Durable steel rings and adapters provide outstanding life
- Compatible with M18 force logic press tool
- 2-1/2 in. to 4 in. capacity
- Includes: (1) M18 2 - 1/2 in. ring (49-16-2656), (1) M18 3 in. ring (49-16-2657), (1) M18 4 in. ring (49-16-2658), (1) ring jaw 1 (49-16-2659), (1) plastic carrying case
- 2-hinge design requires less clearance to fit around pipe
- Compatible with M18 force logic press tool (2773-20) and M18 force logic long throw press tool (2773-20L)
The MILWAUKEE M12 Plastic Pipe Shear Kit cuts cleaner, faster, closer, and longer than traditional plastic pipe shears with over 200 cuts on one battery charge. The M12 Plastic Pipe Shear can cut through 2" schedule 80 PVC in three seconds or less. Its razor-sharp pierce-point leaves pipe and tubing clean, burr-free, and ready for installation, minimizing the time users spend on the job. Instantly open the jaw to increase productivity in repetitive cuts by using the tool's quick blade release. Users can expect more work from this cordless shear with a 3mm stainless steel blade and aluminum jaw that resists impact, water, and rust. Powered by M12 REDLITHIUM Battery, users get more power and longer run-time for maximum cuts per charge. The on-board battery fuel gauge helps monitor the charge status, so there's less downtime on the job. In addition to the M12 Plastic Pipe Shear, this kit includes an M12 Battery Charger and an M12 REDLITHIUM CP1.5 Battery Pack.
- Ultra Sharp Pierce-Point delivers burr-free cuts
- Quick Blade Return: Increases productivity in repetitive cuts
- Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant
- Offset Blade Optimized for cutting installed pipe closer than traditional shears
- Variable Speed Trigger for controlled cuts in warm and cold weather
- Cuts PVC, CPVC, PEX Tubing, BlazeMaster, ABS, Non-Metallic Conduit, Rubber Hose, and more
- 5 Year Tool Warranty
- REDLITHIUM battery technology with superior pack construction, engineering and performance to deliver more work per charge and more work over pack life
- UL, CSA and ETL listed
- (1) carrying case
- 5-year limited manufacturer warranty on the tool
- 2-year limited manufacturer warranty on the battery
- Includes: (1) 2470-20 M12 cordless lithium-ion PVC shear, (1) 48-11-2401 M12 REDLITHIUM battery, (1) 48-59-2401 M12 lithium-ion battery charger and 1 carrying case
The M18 ProPEX Expansion Tool features an auto-rotating head for convenient 1-handed operation. A D-handle design and integrated magnesium frame offers maximum jobsite durability, while the quick cam mechanism delivers precise, continuous expansion for 3/8 in. and 1-1/2 in. ProPEX connections. Designed specifically for Uponor ProPEX, the M18 ProPEX Expansion Tool is built to make effortless installations faster than any other tool in the Industry.
- Built-in auto rotate mechanism for effortless, 1-handed use
- Quick cam mechanism delivers precise, continuous expansion for 3/8 in. to 1-1/2 in. ProPEX
- D-handle design and integrated magnesium frame provides maximum jobsite durability
- REDLITHIUM battery technology: superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market
- LED work light illuminates work space in dark locations
- Stroke length 3/8 in. to 1-1/2 in.
- Warranty- 5-year on tool and 3-year on batteries
- Includes: one M18 Cordless ProPEX expansion tool (bare tool) (2632-20), 2-M18 REDLITHIUM XC extended capacity battery (48-11-1828), 1 M18 and M12 multi-voltage charger (48-59-1812), 1 ProPEX expander cone grease (49-08-2400), one 1 in. M18 ProPEX expansion head (49-16-2608), one 1-1/4 in. M18 ProPEX expansion head (49-16-2610), one 1-1/2 in. M18 ProPEX expansion head (49-16-2612), 1-carrying case
The Milwaukee M12 600 MCM Cable Cutter Kit simplifies cable cutting by fitting comfortably in crowded panels. The M12 cable cutter generates 5,000 lbs. of force and fits into tight spaces to effortlessly cut through large-diameter cable, leaving a clean, installation-ready cuts. A built-in LED light illuminates the line of the cut. The compact size and scissor-style jaws enable cutting in crowded panels without looping, ratcheting or long arms. The 600 MCM cable cutter is ideal for electricians, Datacomm, utility or service contractors or demolition crews that face a wide range of applications. The 2-speed gear case delivers the power to cut through large-diameter cable and switches into high speed to slice quickly through a variety of smaller, common wire types. This cable cutter is powered by the M12 REDLITHIUM Battery which delivers up to 150 cuts of 600 MCM copper per charge. In addition to the cable cutter, this kit includes one M12 Battery, a multi-voltage charger and carrying case.
- Powerful open jaws: cut effortlessly through 600 MCM copper and 750 MCM aluminum
- Superior blade geometry: delivers a round and installation-ready cut
- Breakthrough ratcheting mechanism: fits into tight panels for more effective cutting
- REDLITHIUM battery technology: superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market
- Auto release lever: cut, reload and quickly repeat for maximum productivity
- 2-speed gear box: delivers power for large cables and speed for common smaller cables
- Built-in LED light: illuminates the line of cut
- Compatible with all M12 batteries and chargers
- Includes: (1) M12 600 MCM Cable Cutter (Tool Only) (2472-20), (1) M18 & M12 Multi-Voltage Charger (48-59-1812), (1) M12 XC High Capacity REDLITHIUM Battery (48-11-2402), (1) Carrying Case
M18-FUEL cordless pipe threader with one key is the industry's first cordless pipe threader, revolutionizing the pipe threading process. The cordless pipe threader features auto stop technology that senses severe kickback and automatically shuts the tool off. It also has a die head lock preventing die head ejection and a side handle to eliminate the need for you to hold the spinning die head when starting threads. The portable pipe threader delivers unmatched tool control and functionality and allows you to thread faster than the corded competition. Featuring a multi-speed selector, this powerful pipe threader threads faster than corded competitors, maximizing your productivity without compromising thread quality. Our M18 red lithium high output HD12.0 battery delivers unmatched run time in all applications and gives you the power to thread up to 2 in. black iron pipe, stainless steel and rigid metal conduit (RMC). The handheld pipe threader is compatible with 1-key technology and is the industry's first pipe threader that wirelessly connects to a smartphone to track the tool's location, manage it in inventory and lock the tool out for added security and protection to your investment. In addition to the threader, the kit includes two M18-high output HD12.0-battery packs, an M18/M12-rapid charger, a threading support arm and a carrying case.
- Side handle and die head lock for no engagement with spinning die head
- Offset die head for closer threading near pipe bends and against walls
- Auto stop kickback control prevents severe kickback
- Compatible with rigid 12-R and reed R12+ die heads
- Dedicated support arm enables threading without pipe stand
- Over 25+, 2 in. pipe threads per battery charge
- Multi-speed selector optimizes thread quality across pipe sizes
- One key technology allows for tracking, tool security and inventory management
- Power state brushless motor provides more power, more run-time and longer life
- Magnesium enforced carry handle
- Includes: (1) M18 fuel pipe threader with one key(2874-20), (2) M18 redlithium high output HD 12.0 battery packs (48-11-1812), (1) M18 and M12 rapid charger (48-59-1808), (1) threading support arm, (1) carrying case
- Part of the M18 System, featuring over 250+ solutions
- Milwaukee threading dies sold separately
- Includes: (1) M18 fuel pipe threader with 1-key (2874-20), (2) M18 REDLITHIUM high output HD 12.0 battery packs (48-11-1812), (1) M18 and M12 rapid charger (48-59-1808), (1) threading support arm, (1) carrying case
The MILWAUKEE M18 Short Throw Press Tool with Viega PureFlow Jaws is the fastest press tool on the market, pressing 40% faster than the competition providing the fastest, effortless installs from branch to fixture. The press tool is designed for one-handed use and is an easy-to-use solution compared to hand tools. Spring-loaded jaws grip the ring for precise alignment on the fitting, while Auto Cycle ensures a full press every time delivering the added assurance of quality connections. The plumbing press tool provides force optimized for residential installs and eliminates the downtime caused by calibration intervals, reducing cost of ownership, and maximizing productivity for the residential installer. The cordless press tool is powered by Milwaukee's M18 REDLITHIUM battery, allowing users to Cut, Fasten, and Connect on One System. This kit includes two M18 REDLITHIUM CP2.0 battery packs, 1/2 in., 3/4 in. and 1 in. Viega PureFlow jaws, an M18 and M12 Multi-Voltage Charger, and a carrying case.
- 40% faster press
- Auto cycle ensures full press every time
- Designed for one handed use
- Presses Viega PureFlow fittings up to 1 in.
- Optimized for residential installs
- Spring loaded jaw grips ring for precise alignment
- No calibration interval
- Pre-press battery check ensures tool won't start a press it can't complete
- Green LED indicator shows complete press cycle
- Color coded jaws by size to match the Viega PureFlow fittings
The Milwaukee 1 in. Mini Copper Tubing Cutter is designed to be the most durable mini cutter on the market. Featuring a Proprietary Adjustment Mechanism, Milwaukee Mini Tubing Cutters are engineered for 5X Longer Life. For added durability and extended performance, Chrome Rollers provide best in class rust protection. An Easy Grip Knob allows faster adjustment and easier use.
- 1/8 in. - 1-1/8 in. cut capacity
- Proprietary Adjustment Mechanism: Longer Life
- Chrome Rollers: Rust Protection
- Easy Grip Knob: Faster Adjustment
- Tool-Free Blade Change: Easier Use
- Extra blade included
- Cuts copper, brass, aluminum & thin-wall conduit
The Milwaukee Tubing Cutter offers users straighter, cleaner cuts. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy-to-use lock for improved tool safety. This PEX tubing cutter has an all-metal core for added durability on the jobsite. The Tubing Cutter has a 1 in. capacity for rubber, plastic and PEX Tubing. It is for use with the Milwaukee Tubing Cutter Blade (48-22-4203). The tubing cutter tool is backed by Milwaukee's Limited Lifetime Warranty.
- Straighter, cleaner cuts
- Double ground V-shaped blade for clean cuts
- Easy 1-handed locking mechanism
- All metal core
Milwaukee Close Quarters Tubing Cutters are optimized for tough cuts in tight spaces. The compact design allows access to the tightest spaces. Chrome rollers deliver best in class rust protection while integrated weep holes allow water to drain from the tool. Directional grip allows better handling and quick identification of swing direction for easy use. Includes 1/2 in., 3/4 in., and 1 in. cutters and a storage case.
- Compact design: for use in tight spaces
- Easy Identification: Clear size and direction indicators
- Chrome rollers: provides best in class rust protection
- Weep holes: allow water to drain from tool
- Directional grip: indicates swing direction
- Automatically tightens and cuts as it turns
- Replacement copper cutting wheels sold separately: 48-22-4266
- Includes: (1) 1/2 in. close quarters tubing cutter (48-22-4260) , (1) 3/4 in. close quarters tubing cutter (48-22-4261) , (1) 1 in. close quarters tubing cutter (48-22-4262) and (1) storage case
The Milwaukee M12 FUEL ProPEX Expander delivers the fastest 3/8 in. -1 in. connections. Utilizing an auto-rotating head mechanism, the M12 FUEL ProPEX Expander provides even expansions for the most consistent installations. The new ProPEX Expander Heads with RAPID SEAL provide the fastest PEX seal for less down time before pressure testing. Access tight locations to install tubing with the compact, right angle design for fast and easy installations. All-metal gears and an integrated metal frame deliver maximum tool durability on the job site. The POWERSTATE Brushless Motor delivers the fastest expansions, yet runs cooler with no wearable components. The REDLITHIUM 2.0 Compact Battery Pack delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries, as well as best-in-class performance in extreme jobsite conditions. REDLINK PLUS intelligence ensures optimized performance and protection from overload, overheating and over-discharge. The onboard fuel gauge helps you monitor the charge more accurately, so there's less downtime on the job.
- Auto-rotating mechanism provides quick, uniform expansions
- Fastest 3/8 in. -1 in. expansions for up to 35% faster connections
- ProPEX expander heads with RAPID SEAL for up to 65% faster sealing at 45 degree
- Quick cam mechanism for fast, continuous expansion
- Built-in auto rotate mechanism for effortless, one-handed use
- Compact, right angle design for use in tight locations
- All-metal gears and integrated magnesium frame for maximum jobsite durability
- Includes: (1) M12 FUEL ProPEX expander, (1) M12 charger, (1) BMC, (2) M12 REDLITHIUM CP2.0 battery, (1) 1/2 in. rapid seal ProPEX expander head, (1) 3/4 in. rapid seal ProPEX expander head, (1) 1 in. rapid seal ProPEX expander head
- LED work light illuminates work space in dark locations
- Battery fuel gauge displays remaining run-time
- Compatible with all M12 batteries
- M12 FUEL ProPEX expander (2532-20), 1/2 in. ProPEX expander head with RAPID SEAL (49-16-2414), 3/4 in. ProPEX expander head with RAPID SEAL (49-16-2416), 1 in. ProPEX expander head with RAPID SEAL (49-16-2418), M12 REDLITHIUM CP2.0 battery (48-11-2420), (1) M12 lithium-ion battery charger (48-59-2401), ProPEX expander cone grease (49-08-2400), carrying case
M12 Force Logic Press Jaws are manufactured for the highest standards of press quality and durability in the industry. Designed for easy opening with one thumb, these jaws when used with the M12 Force Logic Press Tools represent a one handed pressing solution for up to 1 1/4 in. pipe. M12 Press Jaws will deliver quality press connections on all major fitting brands including Viega ProPress Systems, Elkhart Apollo Xpress and Grinnel G-Press copper systems.
- Easy opening jaw designed for one handed use
- Designed for use with all major fitting manufacturers including Viega ProPress systems, Elkhart Apollo Xpress and Grinnel G-press copper systems
- Compatible with M12 force logic press tool (2473-20 or 2473-22)
- 1-1/4 in. jaw size
- Jaw capacity: 1-1/4 in copper or stainless steel
The Milwaukee Tubing Cutter cuts up to 1 in. rubber and plastic tubing and PEX-tubing. It features a replaceable V-shaped, double ground steel blade for clean perpendicular cuts and maximum tool life. The 1-handed locking mechanism is designed for an easy to use lock for improved tool safety. Backed by Milwaukee's Limited Lifetime Warranty the Tubing Cutter was built with an all metal core that provides longer tool life to the professional user.
- Double-ground V-shaped blade (patent pending) cleaner cuts on 1 in. rubber and plastic tubing/PEX-a tubing
- All metal core (patent pending) durable frame
- Rework groove correct mistakes quickly and effectively
- Locking mechanism (patent pending) 1-handed locking mechanism remains locked while in pouch
- Rust protection resists corrosion and increases tool life
- Rust protection increases tool life by reducing corrosion
The M12 FUEL Extended Reach Ratchets are Milwaukee's latest addition to their best-in-class lineup of ratchets. These ratchets provide industry leading torque output with a slim head profile and an extended neck that give users the longest reach in tight spaces. Investment Cast Steel Yoke housing and the POWERSTATE Brushless Motor deliver the superior durability that users expect from Milwaukee. The M12 FUEL Extended Reach Ratchets are the ideal addition to any tech's tool chest, allowing users to get to stubborn, hard to reach fasteners without the concern of Knuckle Busting, while providing the same best-in-class Torque Output as our M12 FUEL Ratchets.
- Pneumatic ratchet performance with up to 55 ft./lbs. maximum torque
- Slim head profile and extended neck provide users with the longest reach in tight spaces
- Industry leading fuel technology, a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
- Part of the M12 system, featuring over 125+ solutions
- POWERSTATE brushless motor delivers maximum power and long motor life
- REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating
- REDLITHIUM batteries deliver more work per charge and more work over the life of the battery