Stud Finders
The StudSensor HD55 deep-scanning stud finder features an enhanced LCD display, with Target Spotlight, that illuminates on-screen when you've found the edge of a stud. Select from 2 stud scan modes to find the edges of wood and metal studs to securely anchor mirrors, shelves, and cabinets to the wall while also avoiding live AC electrical wiring.
- StudScan mode locates the edges of wood or metal studs up to 3/4 in. (19 mm) D
- WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) D
- Zircon recommends the use of a brand new 9-Volt battery (sold separately), check the battery expiration date upon battery installation and replace battery periodically due to the LCD power requirements
- Enhanced LCD display with target spotlight indicates approaching stud edge and illuminates when stud edge is detected
- Zircon's patented over-the-stud indication alerts user to start the scan in a new location if scanning begins over a stud
- SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the edge of the stud
- Translucent base and illuminated V-marker groove for more accurate marking of stud edge location
MultiScanner HD900c 1 Step multi-function stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan. and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.
- StudScan mode locates the center, edges, and direction of wood or metal studs up to 3/4 in. (19 mm) D
- DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
- WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) D in stud and metal scanning modes
- Metal scan mode locates non-ferrous metal, such as copper pipe, up to 1-1/2 in. (38 mm) D, and ferrous metal, such as steel pipe, up to 3 in. (76 mm) D
- AC scan mode locates live, unshielded AC electrical wiring up to 2 in. (51 mm) D
- ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
- ColorTrip display with target spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
- Low battery indicator for optimum performance
- Signal strength indicator helps to distinguish between shallow and deep targets
- SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate target location
- Translucent base and illuminated V marker groove for more accurate marking of target location
- Patented pivot pinch grip design promotes comfortable grip for more accurate scan results
The StudSensor HD70 OneStep stud finder takes the guesswork out of finding the stud center. Its two scanning modes locate the center, edges, and direction of wood or metal studs. It is ideal for use on non-textured walls, drywall, wood flooring, or subflooring. Two scanning modes include StudScan Mode that works up to 0.75 in. deep, while DeepScan Mode doubles the scanning depth to 1.5 in. deep for increased accuracy on deeper targets, such as fire walls, and floor and ceiling joists. A bright Backlit LCD Display and Target Spotlight illuminate when stud center is found. The HD70 also indicates the presence of live, unshielded AC electrical wiring for safety. For optimum performance, replace the 9V battery when the unit specifies.
- StudScan Mode locates the center, edges, and direction of wood or metal studs up to 3/4 in. (19 mm) deep
- DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
- WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (50 mm) Deep
- ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
- Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates to indicate the stud center location
- SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the stud center
- Signal strength indicator helps to distinguish between shallow and deep targets
- Translucent base and illuminated "V" marker groove allow for more accurate marking of stud locations
- Zircon recommends the use of a brand new 9V battery (not included); check the battery expiration date upon installation and replace as needed to power the LCD display
- Great solution for your stud detection needs
MultiScanner HD900 1 Step multi-function stud finder quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.
- StudScan mode locates the center, edges, and direction of wood or metal studs up to 3/4 in. (19 mm) D
- DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
- WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) D in stud and metal scanning modes
- Metal scan mode locates non-ferrous metal, such as copper pipe, up to 1-1/2 in. (38 mm) D, and ferrous metal, such as steel pipe, up to 3 in. (76 mm) D
- AC scan mode locates live, unshielded AC electrical wiring up to 2 in. (51 mm) D
- ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
- Backlit LCD display with target spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
- SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud
- Zircon recommends the use of a brand new 9-Volt battery (sold separately), check the battery expiration date upon battery installation and replace battery periodically due to the LCD power requirements
- Translucent base and illuminated V-marker groove for more accurate marking of target location
- Signal strength indicator helps to distinguish between shallow and deep targets
The StudSensor HD35 stud finder features a bright, easy-to-understand interface. A wide, contoured grip for comfort and ease of use, provides optimized visibility and a secure hold at any angle. Find the edges of wood and metal studs to securely anchor pictures, mirrors, and shelves to the wall while also avoiding live AC electrical wiring.
- Stud scan mode locates the edges of wood or metal studs up to in. (19 mm) deep
- READY light indicates when calibration is complete and tool is ready for use
- EDGE arrow lights up sequentially as you approach a stud and fully illuminates when you have found the stud edge
- WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
- Zircons patented over-the-stud indication alerts user to start the scan in a new location if scanning begins over a stud
- SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the edge of the stud
- Patented pivot pinch grip for a comfortable, secure hold in either hand, at any angle
- Translucent base and illuminated V marker groove for more accurate marking of stud edge location
Backlit LCD screen clearly displays all of the sensors readings, even in low light conditions
- Easily operates with key from outside and with turnpiece knob from inside
- Adjustable backset from 2-3/8 in. to 2-3/4 in. for versatile use
- Venetian bronze finish adds an attractive aesthetic appeal
- Grade-2 deadbolt with KW11 keyway for optimum security