Cordless Tool Combination Kits
The MILWAUKEE M18 FUEL 2-Tool Combo Kit has the Most Powerful Drill, including AutoStop Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL 1/2" Hammer Drill, M18 FUEL 1/4" Hex Impact Driver, (2) M18 REDLITHIUM XC 5.0Ah Battery Pack, with an M18/M12 charger and carrying case. The M18 FUEL ½" Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9" in length, this is the most compact drill in its class. The AutoStop Control Mode offers enhanced safety for the user by preventing over-rotation in a bind-up with the best reaction time in the industry. The M18 FUEL ¼" Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. The POWERSTATE Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. The M18 FUEL 2-Tool Combo kit is part of the M18 system which is fully compatible with over 200+ solutions.
- POWERSTATE Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
- POWERSTATE Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- Drill is only 6.9" in length for access into tight spaces and reduced fatigue
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Fastest Drilling and Driving applications under load
- Auto-Stop Feature to Protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a protection event
- Impact is only 4.47" for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- Mechanical Clutch for consistency in driving a wide range of fasteners
- Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
- Up to 3900 RPM for the Impact Driver
- Single Handed Bit Insertion for Ease of Use
- Includes: (1) M18 FUEL 1/2 in. hammer drill (2904-20), (1) M18 FUEL 1/4 in. hex impact driver (2953-20), (2) M18 REDLITHIUM XC5.0 battery, (1) M18 and M12 multi-voltage charger, (1) side handle, (1) BMC Case
The Milwaukee M18 Cordless Lithium-Ion 2-Tool Combo Kit includes the M18 Compact Drill/Driver (2606-20) and M18 1/4 in. Hex Impact Driver (2656-20). The M18 cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide users with the most efficient blend of power, weight, and performance in its class. The compact drill/driver and impact driver are powered by Milwaukee REDLITHIUM CP1.5 lithium-ion batteries, delivering more torque, more power, and longer run-time than the competition. The kit includes one M18 Compact Drill/Driver (2606-20), one M18 1/4 in. Hex Impact Driver (2656-20), two compact REDLITHIUM CP1.5AH lithium-ion batteries, an M18/M12 Multi-Voltage charger, a belt clip, and a contractor bag.
- Milwaukee 4-pole frameless motor features a robust design combined with rare-earth magnets for longer life
- All-metal gear case and chuck: provide maximum impact and shock durability
- 1/2 in. drill/driver has best in class 500 in./lbs. of torque and 0-400/0 RPM to 1800 RPM
- M18 cordless 1/4 in. hex impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in./lbs. of fastening torque for class-leading performance
- M18 cordless 1/4 in. hex impact driver is the most powerful 1/4 in. hex compact impact driver in its class and offers the best power to size ratio among like competitors
- Built-in LED light illuminates the work surface
- 1/4 in. hex Quick-Connect chuck
- REDLINK intelligence: provides optimized performance and overload protection using total system communication between tool, battery and charger
- M18 compact REDLITHIUM CP1.5AH battery offer best-in-class construction: offers long-lasting performance and durability
- Fuel gauge onboard battery: displays remaining runtime for less downtime on the job
- All-weather performance: delivers fade-free power in extreme jobsite conditions
- Compact design: allows greater accessibility in tight work spaces
- Batteries runs cooler and performs in climates below 0 degree F/minus 18 degree C, its compact, lightweight design fits in tight work spaces and reduces user fatigue
- Multi voltage charger provides single unit simplicity: quickly charge all M12 and M18 battery packs- power up your Milwaukee compact batteries in 30-minutes
- Includes: one 2606-20 M18 1/2 in. drill/driver, one 2656-20 M18 1/4 in. hex impact driver, two 48-11-1815 M18 compact REDLITHIUM CP1.5Ah batteries, one 48-59-1812 M18/M12 multi-voltage charger, 1 contractor bag
- Single unit simplicity: quickly charges all M12 and M18 battery packs- power up your Milwaukee compact batteries in 30-minutes
M18 Cordless LITHIUM-ION 4-Tool Combo Kit 2696-24 includes the M18 ½ in. Hammer Drill/Driver (2607-20), M18 Sawzall Recip Saw (2621-20), M18 1/4 in. Hex Impact Driver (2656-20), and M18 LED Work Light (2735-20). The M18 Cordless LITHIUM-ION System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM the M18 Cordless system delivers more torque, more power, and longer run-time than the competition. Includes two M18 XC high capacity lithium-ion batteries and a M18/M12 charger. Milwaukee's patented technology combines innovative motor design and superior ergonomics to give you the most efficient blend of power, weight and performance on the job.
- M18 1/2 in. hammer drill/driver (2607-20), Sawzall recipe saw (2621-20), blade, M18 1/4 in. hex impact driver (2656-20), M18 LED work light (2735-20), M18 and M12 multi-voltage charger (48-59-1812), two M18 3.0AH XC high capacity red lithium batteries and contractor bag
- M18 1/2 in. hammer drill/driver with 4-pole frameless motor features a robust design combined with rare-earth magnets for longer life, 500 in./lbs. of torque, 0-400/0-1,800 RPM and 29,000 BPM
- M18 reciprocating saw features a gear-protecting clutch and variable speed trigger
- M18 1/4 in. hex impact driver with 4-pole frameless motor delivers 1500 in./lbs. of torque, 2,750 RPM and 3,450 IPM
- Quik lock blade clamp for fast, easy, tool-free blade changes for SAWZALL and HACKZALL blades
- Milwaukee M18 cordless LED work light lasts 600X longer than conventional incandescent bulbs with a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty
- Digital power management: overload protection prevents damage to the tool and battery
- Compatible with all M18 batteries and M18 chargers
- 5-year limited warranty on tools, 3-year limited warranty on batteries
- 2656-20: Milwaukee engineered impact mechanism delivers maximum application speed for greater efficiency on the job
MILWAUKEE M12 FUEL 2-Tool Combo Kit has the Most Powerful Subcompact Drill, the Fastest Driving Subcompact Impact Driver while being the overall Most Compact Drill and Impact Driver. Includes MILWAUKEE M12 FUEL 1/2" Drill Driver, M12 FUEL 1/4" Hex Impact Driver, M12 REDLITHIUM XC 4.0Ah Battery Pack, M12 REDLITHIUM CP 2.0Ah Battery Pack, with an M12 charger and a contractor bag. The M12 FUEL 1/2" Drill/Driver is the Most Powerful Subcompact Drill Driver, the most compact in size, and has the fastest speed under load. The POWERSTATE brushless motor delivers the most power on the widest variety of applications. The portable drill is the shortest solution in its class offering maneuverability and access to tight spaces. MILWAUKEE REDLINK PLUS Intelligence delivers top of the line thermal performance to give users the Fastest Speed Under Load. MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. At 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in its class. Tri-LEDs surround the bit accessory with brighter lights and fewer shadows providing maximum visibility. Using M12 REDLITHIUM 2.0Ah compact and 4.0Ah extended capacity battery packs will deliver more work per charge. The M12 FUEL Impact Driver and M12 FUEL 1/2" Drill Driver are part of MILWAUKEE M12 System which is fully compatible with over 125 solutions.
- Most Powerful Subcompact Hammer Drill
- Fastest Subcompact Impact Driver
- Most Compact Drill and Impact Driver for best access in tight spaces
- Fastest Drilling and Driving applications under load
- Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver
- 1/2" All-Metal chuck for maximum durability, grip and bit retention
- Mechanical Clutch on Drill for consistency in driving a wide range of fasteners
- Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode
- More work per charge with the M12 REDLITHIUM XC4.0 battery pack
- All-Metal Gearcase for ultimate durability
- Warranty: 5 Year Tool, 3 Year XC Battery, 2 Year CP Battery
- Part of the M12 System, featuring over 125+ Tools
- Includes: (1) 3404-20 M12 FUEL Hammer Drill Driver Bare Tool, (1) 3453-20 M12 Fuel Impact Driver Bare Tool, (1) M12 Redlithium XC 4.0AH Battery (48-11-2440), (1) M12 Redlithium CP 2.0AH Battery (48-11-2420), (1) M12 Battery Charger (48-59-2401)
The 2497-22 M12 Cordless 2-Tool Combo Kit includes the M12 3/8 in. Hammer Drill/Driver and the M12 1/4 in. Hex Impact Driver (2450-20). The innovative M12 Cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by REDLITHIUM, the M12 Cordless system offers unmatched power, speed and tool belt portability. Each tool in the Milwaukee 2497-22 kit has a built-in power gauge that indicates the remaining charge in its lithium-ion battery, which charges in as little as 30-minutes on the included charger. These tools also come with a carrying case for added convenience. Cordless tools powered by REDLITHIUM batteries deliver more torque, more power and longer run time than the competition.
- Milwaukee 2411-20: powerful Milwaukee motor: delivers best-in-class 275 in. lbs. of torque
- REDLITHIUM Battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
- 2-speed metal gear box: select the correct drilling speed for the material and accessory, from 0 to 400/0 RPM to 1500 RPM and 0 BPM to 22,500 BPM
- 3/8 in. single sleeve ratcheting chuck: allows quick bit changes and maximum durability, grip and bit retention
- 2-speed metal gear box and 3/8 in. metal single sleeve ratcheting chuck provide maximum durability and superior grip and bit retention
- Compact and lightweight profile: provides the ultimate in portability and convenience
- Milwaukee 2450-20: Milwaukee 4-pole frameless motor features a robust design combined with rare-earth magnets for longer life, more power and more run time than any brushed competitor
- Milwaukee engineered impact mechanism: delivers maximum application speed for greater efficiency on the job
- REDLINK intelligence: provides optimized performance and overload protection using Total system communication between tool, battery and charger
- Cordless tools powered by REDLITHIUM batteries deliver productivity: 40% more run time, 20% more speed, 20% more torque, fade free power durability, operates down to 0/-18, runs 20% cooler, up to 50% more recharges, no memory effect
- Compatible with all M12 batteries
- Compatible with all M12 chargers
- Includes: 2411-20 M12 cordless lithium-ion 3/8 in. hammer drill/driver, 2450-20 M12 1/4 in. hex impact driver, two 48-11-2401 M12 REDLITHIUM battery, 48-59-2401 M12 lithium-ion battery charger, contractor bag
- M12 cordless 3/8 in. hammer drill driver delivers best in class power, speed and durability, with 275 in. lbs. of torque and 0-400/0-1500 RPM
The Milwaukee M18 18-Volt Lithium-Ion Cordless Combo Kit (6-Tool) has all the tools you need to tackle a wide range of drilling, driving, cutting and grinding applications. Featuring patented technologies and electronics, an innovative motor design and superior ergonomics, these tools give you the power, weight and performance to tackle whatever you throw at them. Powered by REDLITHIUM for greater torque and longer run time, this set is durably made to withstand the toughest jobsite wear and tear for years of reliable use.
- Includes: one contractor bag, one M18 compact in. hammer drill/driver (2607-20), one M18 SAWZALL reciprocating saw (2621-20), one M18 6 in. circular saw (2630-20), one M18 in. hex impact driver (2656-20), one M18 cordless 4-1/2 in. cut-off/grinder (2680-20), one M18 LED work light (2735-20), two M18 REDLITHIUM 3.0 Ah xc extended capacity battery (48-11-1828), one M18 and M12 multi-voltage charger (48-59-1812)
- M18 compact 1/2 in. hammer drill/driver 4-pole frameless motor delivers 500 in. lbs. of torque and up to 1,800 RPM
- All-metal gear case and in. metal chuck: provide maximum impact and shock durability
- M18 SAWZALL reciprocating saw delivers unmatched durability, speed and run-time
- Stroke length 1-1/8 in.
- M18 cordless lithium-ion 6 in. circular saw that is designed to provide powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing and carpentry
- Electronic brake stops blade quickly
- M18 cordless 1/4 in. hex impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in./lbs. of fastening torque for class-leading performance
- Milwaukee 4-1/2 in. cut-off/grinder (2680-20) delivers maximum power when cutting or grinding, the 2680-20 is the only cordless cut-off grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions
- M18 cordless 4-1/2 in. cut-off grinder has 4-pole motor that delivers 9000 RPM
- M18 cordless LED work light lasts 600X longer than conventional incandescent bulbs
- REDLINK intelligence: provides optimized performance and overload protection using total system communication between tool, battery and charger
- 5-year warranty on tools, 3-year warranty on M18 batteries
The MILWAUKEE M18 Transfer Pump offers users faster water transfers and service calls. This portable water transfer pump is the industry's first cordless transfer pump, offering users the fastest setup. With an innovative self-priming pump, users can connect and go quicker than ever. The Milwaukee transfer pump's flexible impeller and powerful pump move water at up to 480 Gal. per hour, generates up to 18 ft. of lift and produces up to 75 ft. of head height. As a part of the M18 System, REDLITHIUM battery packs power the water transfer pump, which delivers up to 240 Gal. moved per charge on an XC5.0 battery pack. Onboard REDLINK Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. REDLINK also provides optimized performance and overload protection in abusive situations.
- Self priming, connect and go
- Detects when water flow stops and automatically shuts off
- Ideal use: clean water
- Run time: transfer up to 480 Gal. per hour on a single battery charge
- Flow rate: 8 GPM
- Portable design with water resistant battery cover
- Part of the M18 system, featuring over 250+ tools
- Includes: (1) M18 transfer pump( Tool Only- 2771-20 )
- Battery and charger sold separately
The Milwaukee M18 FUEL 1 in. SDS Plus Rotary Hammer is the next generation of cordless rotary hammer drills delivering users ultimate jobsite performance and productivity. The M18 FUEL 1 in. SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP Control for enhanced safety, and can drill up to (125) 3/8 in. x 2 in. holes per charge when paired with the M18 HIGH OUTPUT XC6.0 Battery. The POWERSTATE Brushless Motor delivers users 2 ft.-lbs. of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over-discharge. The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery delivers 50% more power while running 50% cooler than the M18 REDLITHIUM XC batteries. This hammer provides maximum control and enhanced safety with the AUTOSTOP Kickback Control. This feature prevents over-rotation if the tool gets bound up while users are drilling in rebar or hard aggregate.
- AVS Anti-Vibration Systems
- 2 ft. lbs. impact energy
- 3 mode: rotary hammer, hammer only, rotary only
- POWERSTATE brushless motor
- REDLINK PLUS intelligence: integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging
- M18 REDLITHIUM HIGH OUTPUT XC6.0 battery pack provides 50% more power and runs 50% cooler verses M18 REDLITHIUM XC battery packs
- 1,330 RPM
- 4,800 BPM
- Part of the M18 system, featuring over 250+ solutions
- Includes: one M18 FUEL 1 in. SDS plus rotary hammer (2912-20)
The Milwaukee M12 12-Volt lithium-ion Cordless 3/8 in. Ratchet Kit is ideal for auto mechanics and maintenance and repair professionals looking for maximum performance and productivity in a subcompact cordless tool. The powerful 12-Volt motor produces up to 35 ft. lbs. of torque and has 250 RPM for the power and speed of a pneumatic ratchet without the air hose. Powered by a M12 REDLITHIUM battery pack, reliable and long-lasting power is always at hand to handle a wide range of applications accurately and with ease. A compact 10-3/4 in. L and a light 1.9 lbs. the ratchet tool-belt portable and features a 3/4 in. low-profile head design for work in tight spaces and engine bays. Easy to control and durable with a variable-speed metal trigger and reinforced steel housing, this ratchet and kit will provide years of reliable use.
- Powerful 12-Volt motor delivers up to 35 ft. lbs. of torque
- Superior fastening speed with 250 RPM to tackle a variety of applications
- Durable metal variable-speed trigger
- Compact head for use in tight spaces and engine bays
- Charger replenishes batteries in as little as 30-minutes for less downtime
- REDLITHIUM batteries offer superior pack construction, electronics and performance
- REDLINK plus intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger
- On-board fuel gauge helps you monitor the charge precisely for less downtime on the job
- Built-in LED light illuminates work surfaces in dark locations
- Compatible with all M12 chargers
- Includes: cordless 3/8 in. lithium-ion ratchet, M12 REDLITHIUM battery, M12 lithium-ion battery charger and carrying case
- 5-year limited tool warranty, 2-year limited battery warranty
- Compatible with all M12 batteries
The 2695-24 M18 Cordless 4-Tool Combo Kit includes the M18 1/2 in. Hammer Drill / Driver (2607-20), M18 HACKZALL One- Handed Recip Saw(2625-20), M18 1/4 in. Hex Impact Driver (2656-20), and M18 Work Light (2735-20). The M18 Cordless LITHIUM-ION System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM the M18 cordless system delivers more torque, more power, and longer run-time than the competition.
- Includes: (1) contractor bag. (1) M18 compact 1/2 in. hammer drill/driver (2607-20), (1) M18 HACKZALL recip saw (2625-20), (1) M18 1/4 in. hex impact driver (2656-20), (1) M18 LED work light (2735-20), (2) M18 REDLITHIUM 3.0Ah XC extended capacity battery, (48-11-1828), (1) M18 and M12 multi-voltage charger (48-59-1812), (1) thin kerf blade
- M18 compact 1/2 in. hammer drill/driver features a robust design combined with rare-earth magnets for longer life, best-in-class 500 in-lbs. of torque and 0-400/0-1,800 RPM
- All-metal gear case and chuck: provide maximum impact and shock durability
- Compact design: allows greater accessibility in tight work spaces
- HACKZALL M18 cordless lithium-ion 1-handed recip saw (2625-20) features a patent pending dual gear anti-vibration system for unmatched comfort and control as well as light weight design for superior control and versatility
- Powerful motor delivers 0-3,000 strokes per minute and a 3/4" stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC
- Built-in LED light illuminates the work surface while cutting
- M18 cordless 1/4 in. hex impact driver is the most powerful 1/4 in. hex compact impact driver in its class and offers the best power to size ratio among like competitors
- M18 cordless 1/4 in. hex impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs. of fastening torque for class-leading performance
- 1/4 in. hex quick-connect chuck
- M18 cordless LED work light lasts 600X longer than conventional incandescent bulbs
- 35 degree rotating head allows you to easily direct the light beam at the desired work area
- M18 REDLITHIUM battery is designed with superior pack construction, electronics and performance to optimize work per charge and work over pack life
- M18 HACKZALL 1-handed reciprocating saw (2625-20) features a patent pending dual gear anti-vibration system for unmatched comfort and control
- Includes: 2607-20 M18 1/2 in. hammer drill/driver, 2625-20 M18 HACKZALL, 2650-20 M18 1/4 in. hex compact impact driver, 2735-20 M18 work light, 48-59-1812 M18 lithium-ion battery charger, (2) M18 REDLITHIUM XC extended capacity battery 48-11-1828, (1) contractor bag
RIDGID introduces the R86115K 18V Brushless 1/2 in. Hammer Drill/Driver Kit. RIDGID brushless motor technology delivers maximum performance and longer runtime. The RIDGID 18V Brushless 1/2 in. Hammer Drill delivers up to 800 in./lbs. of torque for maximum power. With a 2-speed gearbox and max RPM of 2,100, this 18V brushless hammer drill can handle the complete range of drilling application like drilling and driving into wood and metal as well as drilling into masonry. It was designed with superior ergonomics for enhanced user comfort. This 18V brushless hammer drill is 35% more compact and 20% lighter weight than the previous model (R8611506), and still powers through even the most demanding applications. The RIDGID 18V Brushless 1/2 in. Hammer Drill features an all-metal 1/2 in. ratcheting chuck and metal gearcase for maximum jobsite durability. The RIDGID 18V MAX Output 4.0Ah battery will provide more power and 3X more runtime compared to the 1.5 Ah lithium-ion battery (R870015). As always, this RIDGID 18V Brushless 1/2 in. Hammer Drill/Driver is 100% compatible with all RIDGID 18V batteries. Best of all, this tool is backed by the Industrys Only Lifetime Service Agreement, simply register within 90 days of purchase for FREE Parts, Free Service, For LIFE. The R86115K includes the 18V Brushless 1/2 in. Hammer Drill/Driver, Auxiliary Handle, 18V 4.0 Ah MAX Output Battery, Charger, Belt Clip with Screw, Bit Holder with Screw, Tool Bag, and Operators Manuals.
- Maximum Performance. Longer Runtime.
- Included 18V MAX Output batteries deliver maximum power
- Ergonomic design delivers superior comfort and control
- Powerful brushless motor delivers 800 in./lbs. of torque
- Hammer Drill: 35% more compact and 20% lighter weight compared to the R8611506 18V Brushless Hammer Drill
- Hammer Drill: 1/2 in. metal ratcheting chuck and metal gear case for jobsite durability
- Hammer Drill: 2-speed gearbox provides 0 500 / 0 2,100 RPM
- Hammer Drill: LED light for improved visibility in low-light situations
- Hammer Drill: Reversible belt hook and bit holder allow users to apply on either side for additional customization
- Battery: 18V MAX Output batteries deliver up to 2X more power compared to the 1.5 Ah lithium-ion battery (R870015)
- Battery: 3X more runtime compared to the 1.5 Ah lithium-ion battery (R870015)
- Battery: Advanced electronics and innovative cooling technology for extended battery life
- 100% Compatible: Works with all RIDGID 18V Batteries, Tools, and Chargers
- Lifetime Service Agreement with registration within 90 days of purchase
- Includes: (1) R86115 Brushless 1/2 in. Hammer Drill/Driver, Auxiliary Handle, Driving Bit, Belt Clip with Screw, Bit Holder with Screw, (1) R840040 4.0 Ah MAX Output Battery, (1) R86093 18V Charger, Tool Bag, and Operators Manuals
- RIDGID: Build for a Lifetime
The Milwaukee M18 FORCE LOGIC 6-Ton Knockout Tool 1/2 in. to 4 in. Kit reduces the tedious steps of hole making, improving user speed and limiting user fatigue. This knockout punch tool is specifically designed to be the ideal mild steel punching tool. It is powerful enough to punch up to 4 in. holes in 14-Gauge mild steel. It is also 40% lighter weight than other 6T knockouts available. The electrical knockout tool has a compact, right angle design that gives users the best clearance in tight spaces. The Quick Connect Alignment System provides users with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all Milwaukee EXACT punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide users with accurate alignment and slug removal ports provide optimal slug removal. The gripping surface on the EXACT punches enables users to thread faster. The cordless 6-ton knockout tool delivers the Easiest Way to Punch.
- Powerful motor: delivers 5,000 OPM to 20,000 OPM
- Quick Connect Alignment system speeds up alignment by delivering the easiest set-up and enabling the clearest view of the work surface
- Part of the M18 system, with over 250 plus cordless solutions
- 40% lighter weight and compact size deliver the best clearance in tight spaces
- Exact punches and dies are rated for both mild and stainless steel punching
- Exact dies feature vivid red cross hairs for clearest alignment
- Large size ID markings permit easy punch and die selection
- Tooth geometry of EXACT punches and slug removal ports in EXACT dies, deliver optimal slug removal
- Compatible with competitive accessories
- Compatible with all M18 batteries and M18 chargers
- Includes: 2677-20 M18 FORCE LOGIC 6T knockout tool, 7/16 in. draw stud, 3/4 in. draw stud, quick connect Alignment system, EXACT 1/2 in. to 4 in. conduit punches and dies, one M18 REDLITHIUM 2.0 compact battery pack, M18 and M12 multi-voltage charger and carrying case
The Makita 18-Volt X2 LXT Lithium-Ion (36-Volt) Brushless Cordless 1.6 Gal. HEPA Filter Backpack Dry Vacuum Kit (XCV17PG) is a powerful and portable clean-up solution that eliminates extension cords that trail corded backpack vacuums. The XCV17PG is ideal for cleaning crews, as well as for construction applications when used as part of a dust extraction system. The XCV17PG is powered by two 18-Volt Lithium-Ion batteries for 36-Volt power and performance but without leaving the 18-Volt LXT battery platform. The efficient BL Brushless Motor generates 78 CFM of suction and 44 in. of static water lift for fast clean-ups and improved dust extraction, with no cord to pull along or get in the way. The XCV17PG weighs 15 lbs. (with empty dust bag and two 18-Volt 5.0Ah batteries) and has padded shoulder straps and waist belt with multiple adjustments for a comfortable fit. Cordless and compact, the push button power selection controller attaches to the waist belt of the harness for convenient operation. The efficient HEPA filter combined with the filter bag captures large, small and micro dust particulates and the half-gallon dust collection container is easily removed for dust disposal. When using two 18-Volt 5.0Ah batteries, users will get up to 139-minutes of continuous operation on low setting and 40-minutes on the high setting. It's part of Makita's expanding 18-Volt LXT System, the world's largest cordless tool system powered by 18-Volt lithium-ion slide-style batteries.
- Powerful BL Brushless Motor generates 78 CFM of suction power and 44 in. of water lift
- Up to 139-minutes of continuous run time on normal setting and 40-minutes on max setting using two 18-Volt LXT 6.0Ah batteries BL1860B
- Dual Port Rapid Optimum Charger (DC18RD) charges two 6.0Ah batteries in only 55-minutes
- Efficient two stage HEPA filter captures 99.97% of particulates 0.3 microns and larger extending the life of the main filter
- BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Easily accessible side-loading batteries for added convenience
- Large capacity disposable filter bag for less frequent disposal
- Push button power selection controller for (max/high/normal) operation, conveniently attaches to harness waist belt
- Built-in L.E.D. light on the controller illuminates the work area
- Durable and compact design
- Padded shoulder straps and waist belt with multiple adjustments for improved fit and comfort
- Quiet operating sound level of 67 dB(A) on max power and 60 on normal power
- Equipped with flexible hose and aluminum telescoping wand for added reach and durability
- 18V LXT Lithium-Ion 6.0Ah battery BL1860B, features an integrated L.E.D. battery charge level indicator
- 18V LXT Lithium-Ion 6.0Ah battery BL1860B provides up to 2X more run time per charge compared to BL1830
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Dual Port Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Dual Port Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
The MILWAKUEE M18 FORCE LOGIC 10 Ton Knockout Tool 1/2"-4" Kit reduces the tedious steps of hole making, improving user speed and limiting user fatigue. This knockout punch tool is powerful enough to punch up to 6" holes in 12 gauge mild steel and 14 gauge stainless steel. The Quick Connect Alignment System provides users with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all Milwaukee EXACT punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide users with accurate alignment and slug removal ports provide optimal slug removal. The gripping surface on the EXACT punches enables users to thread faster. The cordless 10-ton knockout tool delivers the Easiest Way to Punch.
- Powerful hydraulic pump delivers up to 10-tons of force
- Powerful enough to punch 6 in. holes in 12-Gauge mild steel, and 14-Gauge stainless steel
- Part of the M18 system, with over 250 plus cordless solutions
- Quick connect Alignment system speeds up alignment by delivering the easiest set-up, and enabling the clearest view of the work surface
- EXACT Punches and Dies are rated for both mild and stainless steel punching
- EXACT Dies feature vivid red cross hairs for clearest alignment
- Large size ID markings permit easy punch and die selection
- The tooth geometry of EXACT Punches, and Slug Removal Ports in EXACT Dies, deliver optimal slug removal
- Compatible with competitive accessories
- Compatible with all M18 batteries and M18 chargers
- Includes: 2676-20 M18 FORCE LOGIC 10T Knockout Tool, 7/16" Draw Stud, 3/4" Draw Stud, 1-1/8" Draw Stud, Quick Connect Alignment System, EXACT 1/2" to 4" Conduit Punches and Dies, (2) M18 REDLITHIUM XC Extended Capacity Battery Pack, M18 and M12 Multi-Voltage Charger, and Carrying Case
RYOBI introduces the 18-Volt ONE+ Lithium Ion Cordless 6-Tool Combo Kit with (2) 1.5 Ah LITHIUM+ Batteries, Charger, and Tool Bag. The variable speed reciprocating saw includes a blade with a 7/8 in. stroke length capable of 3,100 SPM. For high torque fastening jobs, turn to the impact driver for spinning lag bolts and deck screws. A carbide tipped blade comes with the 5-1/2 in. circular saw, capable of carving through material at speeds up to 4700 RPM (no load). A keyless chuck secures 1/2 in. bits into the drill, a tool that allows you to select one of 24 clutch settings for optimal torque. Cut, scrape, and sand hard-to-reach spaces with the JobPlus Base and Multi-Tool Adapter. With the ONE+ Worklight, you'll never lose sight of your projects. This worklight can be positioned on its belly, rear, or hung from above. Best of all, it's a part of the RYOBI ONE+ System of over 125 cordless tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this 6-Tool Combo Kit includes a Drill/Driver with Screwdriver Bit, a Circular Saw with Blade and Blade Wrench, a Reciprocating Saw with two Blades and a Hex Key, an Impact Driver with Phillips Bit and Socket Adaptor, a JobPlus Base with Multi-Tool Attachment Head, Wood Cutting Blade, Segment Saw Blade, Sanding Pad, Sample Sandpaper, an Allen Wrench, a Universal Multi-Tool Accessory Adaptor, a Worklight, a Charger, two 1.5 Ah LITHIUM+ Batteries, a Tool Bag, and operator's manuals.
- Drill/Driver: 2 speed settings (0-440 or 0-1600 RPM) variable with a spring-loaded trigger
- Reciprocating Saw: Features tool-free blade change
- Reciprocating Saw: Adjustable, pivoting, shoe allows depth-of-cut control and more efficient use of blade
- Circular Saw: Features an EXACTLINE Laser, which automatically activates during use for improved cutting accuracy
- JobPlus Multi-Tool: Includes a sanding pad and 5 pieces of sandpaper and a multi-tool attachment head
- Impact Driver: Auto-load chuck for fast, easy, one-handed bit loading and ejecting
- Worklight: Multi-functional design capable of sitting flat on battery, on end, or hanging for ultimate lighting versatility while the swivel head directs light where needed
- Compact LITHIUM+ Batteries: Improve the performance of RYOBI 18-Volt ONE+ tools up to 15% compared to 18-Volt Ni-Cd batteries
- Compact LITHIUM+ Batteries: Provide up to 35% more runtime than 18-Volt Ni-Cd batteries
- Compact LITHIUM+ Batteries: Feature on-board fuel gauge with indicator light to check your charge
- Compact LITHIUM+ Batteries: Retain charge when idle and can be recharged in as little as 30 minutes
- Charger: Dual Chemistry Technology protects battery cells, maximizes battery life, and conserves energy so well it earned an ENERGY STAR logo
- Charger: 18-Volt Dual Chemistry Charger is compatible with any 18-Volt ONE+ battery (Ni-Cd or lithium-ion)
- Charger: Batteries stored on the charger are conditioned for peak performance
- Part of the RYOBI ONE+ System of over 125 Cordless Tools
- 3-year manufacturer's warranty
- Includes: (1) P208B Drill/Driver with screwdriver bit, (1) P506 Circular Saw with blade and blade wrench, (1) P514 Reciprocating Saw with (2) blades and hex key, (1) P236A Impact Driver with Phillips bit and socket adaptor, (1) P246 JobPlus Base with P570 Multi-Tool Attachment Head, blades, sample sandpaper and sanding pads, Allen wrench, Universal Multi-Tool Accessory Adaptor, (1) P704 Worklight, (1) P117 Dual Chemistry Charger, (2) 1.5 Ah LITHIUM+ Compact Batteries, (1) P117 Dual Chemistry Charger with IntelliPort Technology, (1) Tool Bag, operator's manuals
- *Stem Pack Style Battery
The Milwaukee 2997-22 two tool brushless FUEL cordless combo kit delivers the most advanced 18-Volt cordless drilling and fastening technology in the industry. This kit features 2 M18 FUEL 18-Volt lithium-ion brushless cordless tools including a ½ in. hammer drill and ¼ in. impact driver. M18 FUEL is fully compatible with the Milwaukee M18 18-Volt cordless system, featuring over 200 plus tools. Included is the M18 FUEL 1/2 in. Hammer Drill (2804-20) that delivers Up to 60% More Power, is Up To 1.5 Shorter and is Up To 2X Faster Under Heavy Load. At 1,200 in./lbs. of torque and 6.9 in. length it has the power for demanding applications and allows access into tight spaces. Also includes is the M18 FUEL 1/4 in. Hex Impact Driver (2853-20) which is the Fastest, Most Compact, and Most Powerful tool in its class. At 2,000 in./lbs. of torque and 4.59 in. it increases user productivity for demanding fasteners and gives users more access to tight spaces. M18 FUEL features the most advanced cordless technology in the industry, a POWERSTATE Brushless Motor, REDLINK PLUS Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, longer run time and more power.
- 2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load
- 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque
- 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications
- 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces
- REDLINK PLUS Intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system
- REDLITHIUM XC 5.0 Ah battery pack: delivers more work per charge and more work over the life of the pack than competitors
- Compatible with all M18 batteries and tools
- 5-year tool and 3-year battery warranty
- Includes: (1) M18 FUEL 1/2 in. hammer drill (2804-20), (1) M18 FUEL 1/4 in. hex impact driver (2853-20), (2) M18 REDLITHIUM XC5.0 Battery, (1) M18 and M12 multi-voltage charger, (1) side handle, (2) belt clip, (2) bit holder, (1) carrying case
The MILWAUKEE M18 FUEL Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router leverages the POWERSTATE Brushless Motor and REDLINK PLUS electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM delivering users with power and speed for clean, quality cuts in hard materials. With an M18 REDLITHIUM XC5.0 battery, the cordless compact router cuts up to 250ft of 3/8" roundovers in red-oak, providing users with all-day run time with fewer trips to the charger. The handheld router is equipped with a micro-adjust dial and macro-adjust button, giving users fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives users control in all applications. The trim router also features a sturdy 4" sub-base plate giving users stability, and dual-LED lights illuminate their work surface. The M18 FUEL Compact Router is compatible with a plunge base and an offset base (sold separately).
- POWERSTATE brushless motor: power of corded compact routers and higher SPM to complete cuts in hard woods
- REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- REDLITHIUM battery pack: delivers more work per charge and more work over the life of the pack than competitors
- Variable speed dial ranges between 10,000 RPM and 31,000 RPM, providing precise control for clean edges and details
- Macro adjust button allows for fast macro-adjustments and 1.5 in. of adjustable range
- Fine adjustment screw allows for precise adjustments beyond 1/64 in. increments
- Tool-free spindle lock provides easy bit changes with one 11/16 in. collet wrench
- Accepts 1/4 in. shank router bits
- LED light illuminates the cut surface
- Compatible with Milwaukee plunge base and offset base attachments (sold separately)
- Includes straight edge guide, dust extraction attachment and 5-3/4 in. sub-baseplate which accepts 1-1/4 in. template bushings
- Part of the M18 System, featuring over 250+ solutions
- Includes: one M18 FUEL compact router console, 1 fixed base, one 1/4 in. collet, 4 in. round sub-base plate, one 5-3/4 in. template sub-base plate, dust shroud, 1 straight edge guide, one 11/16 in. collet wrench, one 7/16 in. spindle wrench
The MILWAUKEE M18 Brushless 2-Piece Combo Kit includes an M18 Brushless 1/2 in. Hammer Drill/Driver and an M18 Brushless 7-1/4 in. Circular Saw. The M18 1/2 in. Hammer Drill/Driver delivers the most power in its class while maintaining a compact size with a longer run-time. The built-in REDLINK Technology and REDLITHIUM batteries provide users with efficient power delivery and longer battery life. The brushless drill' has a 7 in. long body and weighs just 4.6 lb. with an XC4.0 battery. Its small and light build provides users with excellent control in overhead and tight spaces. The M18 Brushless 7-1/4 in. Circular Saw delivers up to 40% more power than circular saws with brushed motors while giving users up to 30% more run-time. This Brushless Circular Saw delivers 5,000 RPM for smooth cutting, and at only 9.0 lbs, it is lighter than most corded saws. This cordless circular saw also features an integrated rafter hook, magnesium guards, an aluminum shoe, and LED light for maximum versatility. In addition to the M18 1/2 in. Hammer Drill/Driver and M18 7-1/4 in. Circular Saw, this kit includes (2) M18 4.0AH Battery, (1) M12/M18 Charger, and a contractor bag.
- (2902-20): Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces while delivering more power and a longer runtime
- (2902-20): Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life than a brushed motor
- (2902-20): All-metal gear case and 1/2 in. metal chuck: provide maximum durability
- (2902-20): Chuck type: 1/2 in. all- metal ratcheting single sleeve
- (2631-20): Milwaukee Brushless Motor: Optimized for efficiency, this motor delivers over 30% more run-time and longer life than brushed motors. Delivers 5,000 RPM for smooth, powerful cutting
- (2631-20): 2-1/2 in. Cut Depth
- (2631-20): Integrated dust port on guard
- (2631-20): LED light for increased accuracy and visibility
- Includes:(1) M18 Brushless 1/2 in. Compact Hammer Drill (2902-20); (1) M18 Brushless 7-1/4 in. Circular Saw (2631-20); (2) M18 4.0AH Battery (48-11-1840); (1) M12/M18 Charger (48-59-1812); 1 contractor bag
- REDLINK intelligence: advanced overload protection defends against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life
- (1) M18 Brushless 1/2 in. Compact Hammer Drill (2902-20); (1) M18 Brushless 7-1/4 in. Circular Saw (2631-20); (2) M18 4.0AH Battery (48-11-1840); (1) M12/M18 Charger (48-59-1812); 1 contractor bag
- Includes: one 2902-20 M18 BL 1/2 in. hammer drill, one 2631-20 M18 BL 7-1/4 in. circular saw, two 48-11-1840 M18 XC4.0 battery, one 48-59-1812 M18 and M12 charger and contractor bag
The 2498-24 M12 Cordless 4-Tool Combo Kit includes the M12 3/8 in. Drill/Driver (2407-20), M121/4 in. Hex Impact Driver (2450-20), M12 HACKZALL Recip Saw (2420-20), and M12 LED Work Light. The innovative M12 Cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by RED LITHIUM, the M12 cordless LITHIUM-ION system offers unmatched power, speed, and tool belt portability.
- M12 3/8 in. drill driver delivers 250 in./lbs. of torque in a compact light weight design
- M12 1/4 in. hex impact driver delivers best-in-class 850 in./lbs. of torque at only 2.3 lbs. and 0 RPM to -2000 RPM for fast driving
- M12 Hackzall reciprocating saw delivers 0 SPM to 3000 SPM at only 2.6 lbs. and 11 in. for quick cutting in tight spaces
- M12 work light features a 90 degree rotating head and an integrated magnet for hands-free use in a compact package
- Compatible with all M12 batteries
- Compatible with all M12 chargers
- Includes: M12 3/8 in. drill/driver (tool only) 2407-20, M12 HACKZALL recip saw (tool only) 2420-20, M12 1/4 in. hex impact driver (tool only) 2462-20, two M12 REDLITHIUM battery 48-11-2401, M12 lithium-ion battery charger 48-59-2401, 1 contractor bag
Easily delivering up to 3,000 strokes per minute. This M12 12-Volt Lithium-Ion Cordless Screwdriver/HACKZALL Combo Kit is sure to get the job done. Each kit includes a 1/4 in. hex screwdriver that provides up to 150 lbs. of torque at 500 RPM, a battery, a 30 minute charger and tool bag.
- Milwaukee 2490-22 features the reciprocating saw delivers a variable speed of 0 - 3,000 SPM for precision cutting
- 1 battery fits all included tools and is easily recharged with the included charger
- Milwaukee 2490-22 also includes the 1/4 in. hex screwdriver provides 150 in./lbs. of torque for powerful operation
- 15-position clutch screwdriver delivers up to 500 RPM for fast driving when using the Milwaukee 2490-22
- REDLITHIUM advantage: productivity: 40% more run-time, 20% more speed, 20% more torque, fade free power, durability: operates down to 0/-18, runs 20% cooler, up to 50% more recharges, no memory effect
- 1 M12 1/4 in. hex screwdriver (bare tool) (2401-20), one M12 HACKZALL reciprocating saw (bare tool) (2420-20), two M12 REDLITHIUM battery (48-11-2401), one M12 lithium-ion battery charger (48-59-2401), 1 contractor bag
- Compatible with all M12 batteries
- Part of the M12 family with over 80 plus tools
This compact brushless 2-tool kit includes one 1/2 in. hammer drill/driver, one 1/4 in. impact driver, two 20-Volt MAX lithium-ion batteries, charger and carrying bag. At only 5.1 in. front to back, the impact driver features a high-performance brushless motor that delivers 1700 in./lbs. of torque and 3 LEDs for optimum illumination as you work. The hammer drill/drivers brushless motor provides 340 unit watts outs (UWO). The hammer functionality enables users to complete masonry drilling applications. The LED is positioned on the foot for better visibility. Both tools feature an ergonomic design for balance and easier tool control, along with a removable belt hooks. They are backed by a 3-year, limited warranty so you can buy with confidence.
- DCD709 hammer drill/driver is compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 impact driver is only 5.1 in. L to fit in tight spaces
- DCF809 impact driver has 1700 in./lbs. of torque delivering the power you need to get a majority of applications done
- Both tools have a DEWALT built brushless motor for efficient performance and runtime
- DCF809 impact driver is lightweight at only 2.1 lbs.
The MILWAUKEE M18 FORCE LOGIC 6 Ton Knockout Tool 1/2"-2" Kit reduces the tedious steps of hole making, improving user speed and limiting user fatigue. This knockout punch tool is specifically designed to be the ideal mild steel punching tool. It is powerful enough to punch up to 4" holes in 14 gauge mild steel. It is also 40% lighter weight than other 6T knockouts available. The electrical knockout tool has a compact, right angle design that gives users the best clearance in tight spaces. The Quick Connect Alignment System provides users with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all Milwaukee EXACT punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide users with accurate alignment and slug removal ports provide optimal slug removal. The gripping surface on the EXACT punches enables users to thread faster. The cordless 6-ton knockout tool delivers the Easiest Way to Punch.
- Punches up to 4" Holes in 14 gauge Mild and Stainless Steel.
- Quick Connect Alignment System speeds up alignment by delivering the easiest set-up, and enabling the clearest view of the work surface
- Part of the M18 system, with over 250 plus cordless solutions
- 40% Lighter Weight and Compact Size deliver the best clearance in tight spaces
- EXACT Punches and Dies are rated for both mild and stainless steel punching
- EXACT Dies feature vivid red cross hairs for clearest alignment
- Large size ID markings permit easy punch and die selection
- The tooth geometry of EXACT Punches, and Slug Removal Ports in EXACT Dies, deliver optimal slug removal
- Compatible with competitive accessories
- Compatible with all M18 batteries and M18 chargers
- Includes: 2677-20 M18 FORCE LOGIC 6T Knockout Tool, 7/16" Draw Stud, 3/4" Draw Stud, Quick Connect Alignment System, EXACT 1/2" to 2" Conduit Punches and Dies, (1) M18 REDLITHIUM 2.0 Compact Battery Pack, M18 and M12 Multi-Voltage Charger, and Carrying Case
The MILWAUKEE M12 ProPEX Expansion Tool features a built-in auto-rotating head delivering users with convenient one-handed operation. The expansion tool features a compact right angle design enabling users to quickly and easily install tubing in tight locations. A quick cam mechanism delivers precise, continuous expansion for 3/8 in. to 1 in. ProPEX connections while a paddle trigger allows users to easily reach confined spaces. All-metal gears and an integrated metal frame deliver maximum tool durability on the job site. The Milwaukee expansion tool is specifically for Uponor ProPEX and is built to provide users with faster, effortless installations. The cordless expansion tool is compatible with all Milwaukee M12 batteries and features a built-in fuel gauge that displays remaining run-time. In addition to the expansion tool, this kit includes 1/2 in., 3/4 in. and 1 in. ProPEX expansion heads, one ProPEX expansion cone grease, two M12 REDLITHIUM CP1.5 battery packs, an M12 Lithium-ion Battery Charger and a carrying case.
- Quick cam mechanism for fast, continuous expansion
- Compact, right angle design for use in tight locations
- All-metal gears and integrated metal frame for maximum jobsite durability
- Paddle trigger for easy reach in confined spaces
- LED work light illuminates work space in dark locations
- Battery fuel gauge displays remaining run-time
- Compatible with all M12 batteries
- Capacity: 3/8 in. to 1 in. ProPEX connections
- Includes: (1) M12 cordless ProPEX expansion tool (2432-20), (1) 1 in. ProPEX expansion head (49-16-2408), (1) 3/4 in. ProPEX expansion head (49-16-2406), (1) 1/2 in. ProPEX expansion head (49-16-2404), (1) ProPEX expander cone grease (49-08-2400), (1) M12 lithium-ion battery charger (48-59-2401), (2) M12 REDLITHIUM battery (48-11-2401), (1) carrying case
RYOBI introduces the 18V ONE+ 6-Tool Combo Kit with Drill/Driver, Impact Driver, Reciprocating Saw, Circular Saw, Multi-Tool, Work Light, (1) 1.5 Ah Battery, (1) 4.0 Ah Battery, 18V Charger, and Bag. The Drill/Driver has a 1/2 in. heavy duty single sleeve keyless chuck with 24-position clutch to match your drilling and driving needs. The Impact Driver features a variable-speed trigger and 1,800 in./lbs. of torque for control and power. The Reciprocating Saw includes a variable speed trigger to provide more control while cutting a variety of materials. The Circular Saw has front pommel handle for 2-handed operation and a left side blade for better visibility. The Multi-Tool features a lock-on button and variable speed dial for superior ergonomics. The Work Light features an ergonomic design and 160 Lumens of light output. The 1.5 Ah and 4.0 Ah Batteries feature lithium-ion cells for longer overall life. The 18V Charger is compatible with all ONE+ Lithium-Ion Batteries. Best of all, this kit is part of the RYOBI ONE+ System of over 280 Cordless Products that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 18V ONE+ 6-Tool Combo Kit includes a drill/driver with screwdriver bit, an impact driver with bit, a reciprocating saw with blade, a circular Saw with blade, a multi-tool with accessories, a work light, 1.5 Ah and a 4.0 Ah battery, an 18V charger, a tool bag, and operator's manuals.
- Drill/Driver: 24-position clutch and 2-speed gearbox (0 - 450 RPM and 0 - 1,750 RPM) to match your drilling and driving needs
- Impact Driver: Delivers up to 1,800 in./lbs. of torque and 3200 IPM (impacts per minute) for the most demanding applications
- Reciprocating Saw: 1 in. Stroke Length and 3,400 SPM (Strokes per Minute) for up to 60% faster cutting (vs P514).
- Circular Saw: Compact design for better handling and front pommel handle for 2-handed operation
- Multi-Tool: Variable speed dial achieves 10,000-20,000 OPM for optimal control
- Work Light: Produces 160 Lumens of light output
- Batteries: Easily snaps into place and detaches with quick-release easy-access latches
- Charger: Compatible with RYOBI 18V ONE+ Lithium-Ion Batteries
- Part of the RYOBI 18V ONE+ System of Over 280 Cordless Products
- 3-year manufacturer's warranty
- Includes: (1) P215 18V ONE+ Drill/Driver with bit, (1) P235A 18V ONE+ Impact Driver with bit, (1) P519 18V ONE+ Reciprocating Saw with blade, (1) P505 18V ONE+ Circular Saw with blade and blade wrench, (1) P343 18V ONE+ Multi-Tool, (1) P705 18V ONE+ Work Light, (1) P189 18V ONE+ 1.5 Ah Battery, (1) P197 18V ONE+ 4.0 Ah High Capacity Battery, (1) P118B 18V ONE+ Charger, (1) Bag, and operator's manuals