Snow Blowers
SnowEx Walk Behind Broadcast Spreader
- 100 Lb Capacity Walk-Behind
- Single Slot Port Design
- Top Screen
- Poly Cover
- For Spreading Rock Salt And Ice Melt
- Mfg #SP-65
- 100 Lb Capacity Walk-Behind
- Single Slot Port Design
- Top Screen
- Poly Cover
The SnowEx SP-85 heavy-duty snow and ice melt broadcast spreader is great for completing any snow and ice management operation. The spreader width is 20 inches and designed for bagged rock salt and pelletized material. This walk-behind residential spreader comes with a clear vinyl cover, heavy-duty gear box, and stainless steel hardware. There is a single wide opening for bulk salt that can hold up to 160-pounds of materials. The spreader measures 52 by 33 by 29 inches and weighs 42-pounds empty.
- 160 Lb. Capacity
- Single Slot Port Design
- Top Screen
- Poly Cover
SnowEx's SR-210 is a wireless salt spreader that comes with a vertical high-flow auger for spreading bagged rock salt and calcium flake. Simply install the unit into a 2-inch receiver hitch and connect the 7-pin harness for plug-and-play operation. Then, control the spreader with a pocket-sized wireless remote. Comes standard with receiver hitch mount and wireless controller. Polyethylene hopper - eliminates corrosion. Patented 12-volt sealed electric drive/transmission. Heavy-duty automotive-style wiring harness. Low maintenance: no pulleys, chains or belts.
- 3 Cu Ft Capacity, 240 LB
- On/Off With 2 Pre-Set Spinner Speeds On A Wireless Controlled Key Fob
- Powder-Coated Steel Construction, LLDPE safety yellow poly
- Spreads Up To 25'
The Pivot Pal Mount is a swing-away mount that allows full use of a pickup's tailgate. With the Pivot Pal, your entire spreader can swing away from the tailgate, giving you complete access to the bed of your vehicle without having to remove the spreader first. Spreader must be empty to swing out.
- Mounts On Pick-Up Trucks
- Pivots Spreader From Back Of Truck To Allow Tailgate Access
- For SP-575X-1
- Powder Coated Metal
This optional Deflector Kit for the SnowEx SP-65 broadcast spreader. Lets you keep ice melters on the sidewalk or driveway where they belong and not in your yard or landscaping. Skirt adjusts to match the proper width for sidewalk and driving path applications reducing overspread and wasted material.
- Easy Assembly
- 3-Sided
- Poly Material
- For use with SP-65 Walk-Behind Spreaders
0.25 cu yd extension collars are available as an accessory to increase material capacity. For UTVs and compact trucks that can handle the additional weight. For Hopper Spreader.
- Increase Material Capacity
- Stainless Construction
- Additional 0.25 Cubic Yard Capacity
- Genuine SnowEx Accessory
Converts tailgate spreaders for use with granular and pelletized materials. Adjustable stainless steel gate regulates flow rate. Comes with 10 foot cable.
- Converts Tailgate Spreader for pelletized or granular materials
- For SP-575X and SP-575X-1
- Includes an adjustable stainless gate that regulates flow rate and 10 ft. control cable
- Genuine SnowEx Accessory
The SL-80 push sprayer is ideal for spraying brine on sidewalks and in other small areas. Unlike many other products on the market, the SnowEx SL-80 is completely electric powered pump, using a rechargeable battery. It can spray up to 48 inches wide through the front-mounted nozzle. Or it can spray brine through the professional duty spray wand.
- 12 Gallon Capacity
- 12V Rechargeable Battery System
- Toggle Between Front Nozzle And Spray Wand
- Front Nozzle Sprays Up To 48
Apply consistent, controlled material delivery to smaller areas with the new HELIXXâ„¢ 0.35 cu yd stainless steel hopper spreader. The 12145 model is built with many of the same features as the larger HELIXX stainless steel hoppers and is designed to fit UTVs and compact trucks. The patent-pending corkscrew - or "helix" - design of the HELIXX material delivery system is optimized for efficient and cost-effective use of salt and was designed to operate in the target range for salt spreading best practices. The innovative design helps prevent clogs and delivers a material flow superior to traditional augers.
- Full Length HELIXX Design And Multi-Dimensional Tub
- Cab Forward Design
- Material Leak And Spill Protection
- Stainless Steel Construction
The spinner motor transmission is completely electric powered. It draws electricity from the vehicle and offers plenty of power to the spreader. Also, it’s protected from the elements by a sealed drive enclosure. The compact digital control offers variable-speed control of the spinner. It features a diagnostic display, bright LED lights and convenient accessory buttons for easy control of optional accessories. The 3-inch (7.6 mm) high-flow auger allows the units to spread bagged rock salt and calcium flake consistently. The fitted lid provides a convenient solution for protecting the material from moisture. Located in an enclosure on the spreader, the FLEET FLEX electrical system provides power to all accessories and allows for complete fleet interchangeability between other Tailgate Pro FLEET FLEX equipped tailgate spreaders.
- 5.75 Cubic Foot Capacity
- 2 Receiver Mount
- Spreads Bagged Rock Salt
- Spreads Up To 40'
The TPR-020-1 is used to mount a SD-600 or SP-1675 spreader using a 2" receiver hitch. It can be used with a UTV, SUV or compact pickup. It weighs 35 lbs.
- Attaches To Spreader Frame
- For SD-600
- 2 Receiver Mount
- Powder Coated Metal
The TS50 push spreader's hopper is constructed of lightweight and durable polyethylene with a stainless steel gate. With its 100 lb. capacity and easy maneuverability. Ideal for a variety of commercial turf care applications.
- 100 Lb. Capacity
- Built-In Deflector
- Debris Screen
- Super Duty Gear Box For Long Life
The spinner motor transmission is completely electric powered. It draws electricity from the vehicle and offers plenty of power to the spreader. Also, it’s protected from the elements by a sealed drive enclosure. The compact digital control offers variable-speed control of the spinner. It features a diagnostic display, bright LED lights and convenient accessory buttons for easy control of optional accessories. The 3-inch (7.6 mm) high-flow auger allows the units to spread bagged rock salt and calcium flake consistently. The fitted lid provides a convenient solution for protecting the material from moisture. Located in an enclosure on the spreader, the FLEET FLEX electrical system provides power to all accessories and allows for complete fleet interchangeability between other Tailgate Pro FLEET FLEX equipped tailgate spreaders.
- 10.75 Cu Ft Capacity
- 12 Volt Dc Motor Mounted In Weather Resistant Enclosure
- Max Torque Transmission With Hardened Steel Worm And Bronze Gear
- 3 Inch Vertical High Flow Auger And Fitted Lid
The US1000-1 equipment-mounted sprayer has the capacity to hold 100-gallons of liquid, allowing the operator to treat more area between refills. This sprayer is driven entirely by electricity, drawing its power directly from the vehicle's battery. For maximum control, the unit comes standard with a heavy-duty adjustable spray wand.
- 12 Volt Diaphragm Pump
- Spray Distance Vertical: 20 Ft
- Spray Distance Horizontal: 20 Ft
- Adjustable Trigger Style Nozzle
A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60" for the 12145 model. This allows loading with a 5' loader bucket and prevents overflow and spill into the bed of the vehicle. 30" Kit.
- Extends Edge Of Hopper 60 Inches
- Improved Line Of Sight
- Prevents Overflow And Spillage
- Genuine SnowEx Accessory
The ADF-020 Adjustable Deflector restricts spread pattern to prevent material waste. It also prevents vehicle damage by deflecting flying material. For Tailgate Spreader.
- Restricts Spread Pattern Of Materials
- This will fit tailgate spreaders SP-575X and SP-1075X
- 2" x 4" x 48"
- 4 lb.
The TS70 push spreader's hopper is constructed of lightweight and durable polyethylene with a stainless steel gate. With its 100 lb. capacity and easy maneuverability. Ideal for a variety of commercial turf care applications.
- 100 Lb. Capacity
- Optional 3-Sided Deflector
- Debris Screen
- Super Duty Gear Box For Long Life
The new SnowEx® Drop Pro spreader features an all new, user friendly and intuitive variable-speed digital control that offers flexible mounting options. With a 6-cubic-foot material capacity and a 36-inch spread width, the new SnowEx® drop spreader offers controlled application of bagged ice melters and bulk rock salt, making it the ultimate sidewalk spreading solution for use with UTVs, tractors and other compact vehicles.
- 6 Cubic Foot Capacity
- No Mount Included; Must Purchase Separately
- Spreads Bagged Rock Salt, Ice Melt, Bulk Salt Or 50/50 Sand And Salt Mixtures
- Spreads 36 Wide
Helps prevent moisture contamination in spreading material. Fits: SR-110, SR-210, SP-100, SP-125, SP-225.  Height 3", Width 7", Depth 10"
- Clear Top
- Fits around top edge
- For use with SP-100, SP-125, SP-210, SP-225 Spreader
- 1" x 8" x 16"