Sliding & Bypass Door Hardware
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
This is a standard reversible surface mounted for left or right-handed mortise-locking doors. Diecast lever operates with most mortise latches. This is a non-keyed handle set that, can be keyed. Note: Mounting holes may need to be enlarged to 5/16 in. Dia if base of handle does not seat flush against surface of door. Fits: 1-1/2 in. (3.8 cm) to 1-3/4 in. (4.4 cm) thick doors.
- Fits most mortise style latch systems with 3-15/16 in. hole center spacing
- High security design
- Round end face plate with an adjustable hook projection
- Diecast construction with a white finish
- Surface mounted mortise installation
- 45 degree keyway
- Easy to install in less than 30 minutes with a few simple tools
- For further dimensional information, please see the line drawing
Window and door push latches. Constructed of steel. Single body design. They are universal fit.
- Drill, 11/32 in. and 3/32 in drill bit required for installation
- Directions included
- Phillips head screwdriver required for installation
- Mounting hardware included
- Ruler or tape measure may be required for installation
- Multiple lock positions
- 1 piece per package
Wardrobe door roller assembly. They feature a single wheel, top hung with a 7/8 in. Dia plastic convex wheel. The body is stamped steel with an adjustable bracket. Designed for 3/4 in. to 1 3/8 in. T doors. Used by Stanley and others.
- 7/8 in. O.D. nylon wheel
- 3/8 in. offset steel bracket with nylon adjusting wheel
- Fits on Stanley doors
- For 3/4 in. to 1 3/8 in. T doors
- Convex wheel
- Stamped steel
- 1 piece per package
Wardrobe door roller assembly. 7/8 in. plastic convex wheels. They feature a single wheel, are top hung with a round-edge wheel. The assemblies are stamped steel with an adjustable bracket for 3/4 in. to 1 3/8 in. thick doors. Used by Stanley and others.
- 7/8 in. O.D. nylon wheel
- 3/8 in. offset steel bracket with nylon adjusting wheel
- Fits on Stanley doors
- For 3/4 in. to 1 3/8 in. T doors
- 1/8 in. offset
- Convex wheel
- 1 piece per package
These Prime Line Products are wardrobe door roller assemblies. They are 3/4 in. plastic single convex wheel with ball bearing. These are top hung, back panel and side mounting. The 1/2 in. offset adjustable bracket fits 3/4 in. to 1 3/8 in. T doors.
- Nylon roller
- Adjustable offset steel bracket
- Top hung side mount design
- For 3/4 in. to 1 3/8 in. T doors
- Convex wheel
- 1/2 in. offset
1 1/8 in. Roller assemblies. They have adjustable steel ball bearings. These assemblies are used by several glass door manufacturers.
- 1-1/8 in. steel ball bearing roller
- Adjustable housing
- Used by several glass door manufacturers
- Includes fasteners
- Phillips head screwdriver required for installation
- Phillips head screwdriver required for adjustments
Wardrobe door roller assemblies. They 7/8 in. plastic with concave wheels. These are top hung, 7/8 in. Dia concave plastic wheel, adjustable steel bracket. These fit by-passing closet doors from 7/8 in. to 1 3/8 in. T.
- 7/8 in. O.D. center groove nylon wheel
- 5/16 in. offset adjustable steel bracket
- Fits old style Kenna frame
- Zinc plated finish
- Hardware not included
- Adjustable mounting
- 1 piece per package
Handle sets designed for Ador/HiLite doors. No strike is necessary the handle latches into door jamb. Both inside and outside pulls are extruded aluminum.
- Designed for Ador/Hilite doors
- Wood grain feature strip
- Handle latches into door jamb no strike necessary
- 3-7/8 in. hole centers
- Drill required for installation
- Phillips head screwdriver required for installation
Bottom mounting, adjustable height guides. 1 left hand and 1 right hand. Acts as corner bracket for steel frame by-passing doors. Plastic guide fits grooved bottom track. Used by Acme and Stanley door systems.
- Bottom mount
- 1 left hand and 1 right hand
- Adjustable bracket
- Fits cox brand steel framed sliding doors
Wardrobe door roller assemblies. These assemblies are top hung 7/8 in. Dia concave plastic wheel with adjustable steel bracket. Fits by-passing closet doors from 7/8 in. to 1 3/8 in. T. Maximum load rating is 17 lbs. per roller.
- 7/8 in. O.D. center groove nylon wheel
- 9/16 in. offset adjustable steel bracket
- Fits old style Kenna frame
- Zinc plated finish
- Hardware not included
- Maximum load rating is 17 lbs.
- 1 piece per package
Wardrobe door roller assembly. They are 3/4 in. plastic ball bearing convex single wheel. They are top hung, front panel, and side mounting. They have a 3/8 in. offset adjustable bracket, with round edge plastic ball bearing wheel. These will fit 3/4 in. to 1 3/8 in. thick doors.
- Nylon roller
- Adjustable offset steel bracket
- Top hung side mount design
- Fits 3/4 in. to 1-3/8 in. T bypass doors
- Ball bearing wheel
- Convex wheel
- 1 piece per package
Single wheel, top mounting, adjustable height. Acts as corner bracket, for steel frame by-passing doors. 7/8 in. Dia round-edge plastic wheel. Used by Cox door systems.
- Single wheel
- Adjustable bracket
- Designed for steel frame by-passing doors
- Fits cox brand doors
- Top mounting
Single wheel, top mounting, adjustable height bracket. This also acts as corner bracket, for steel frame by-passing doors, 7/8 in. Dia round edge plastic wheel. Used by Acme and Stanley door systems.
- 7/8 in. O.D. round edge nylon wheel
- Adjustable snap-in bracket
- Designed for steel frame by-passing doors
- 1 left hand and 1 right hand
- Used on Acme and Stanley doors
These Prime Line Products are wardrobe door roller assemblies. They are 3/4 in. plastic and convex. They have a front single wheel 3/4 in. in Dia They are top hung, side mounting with a 1/4 in. offset adjustable bracket. They also feature a round edge plastic wheel. These assemblies will fit 3/4 in. to 1 3/8 in. T doors. Used by Cox door systems.
- Single wheel
- Side mounting
- 1/2 in. offset adjustable bracket for back door
- 3/4 in. O.D. round edge nylon wheel
- Fits 3/4 in. to 1-3/8 in. T by-passing doors up to 50 lbs. each
- Fits Cox top hung door
- 1 piece per package
This wardrobe door roller is constructed from nylon and comes affixed to a zinc plated steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Cox and similar styled doors that are 3/4 to 1-3/8 in. thick.
- Nylon roller
- 1/2 in. adjustable offset steel bracket
- Top hung side mount design
- Fits 3/4 in. to 1-3/8 in. thick bypass doors
- Fits cox brand bypass doors
Single wheel, top hung, side mounting. The offset adjustable bracket, round edge plastic wheel fits 3/4 in. to 1-3/8 in. thick doors. Fits Cox doors.
- Nylon roller
- 1/4 in. adjustable offset steel bracket
- Top hung side mount design
- Fits 3/4 in. to 1-3/8 in. thick bypass doors
- Fits Cox brand bypass doors
3-piece white plastic. Adjustable slide sections fits 3/4 in. to 1-3/8 in. thick by-passing doors. Used by many closet door manufactures.
- Floor mount
- Universal design
- Nylon adjustable guide
- For 3/4 in. to 1-3/8 in. thick by-passing doors
Wardrobe door roller assembly. These are 3/4 in. plastic with convex back single wheel that is 3/4 in. Dia These are top hung; side mounting with a 1/2 in. offset adjustable bracket. These round edge plastic wheels fit 3/4 in. to 1 3/8 in. thick doors. Used by Cox door systems.
- Single wheel
- Side mounting
- 1/2 in. offset adjustable bracket for back door
- 3/4 in. O.D. round edge nylon wheel
- Fits 3/4 in. to 1-3/8 in. T by-passing doors up to 50 lbs. each
- Fits Cox top hung door
- 1 piece per package
Sliding panel door bottom guide replacement inserts. Nylon guide insert for steel framed by-passing panel type doors. Repair part for no. N-6553.
- Bottom mount
- Nylon guide for steel bi-pass doors
- Snap on design
- Easy to install
- No tools required for installation
- Wardrobe door guide
- 1 piece per package