Respirator Cartridges, Filters & Accessories
Cartridges for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces.
- P100 for all particulates
North N-Series N95 Replacement Particulate Prefilters. 95% filter efficiency for non-oil based aerosol particulates. For use with North Brand respirators.
- N95 pad filter
- 95% filter efficiency for non-oil based aerosol particulates
- 10 per pack
- White in color
- Slim profile
- NIOSH approved
- Only use for non oil based aerosol particulates
- Only use in combination with North N series mask respirator
3M P95 Particulate Filters are used for paint spraying, solvents and pesticides. Designed to use with 3M 501 filter retainer on 3M 5000 series respirators and 6000 series cartridges only. 3M P95 particulate filter is a great choice in respiratory protection for the professional.
- Workplace/occupational applications only
- Provides at least 95% filtration efficiency against solids and liquid aerosols and is strongly resistant to oils
- Contains 6-filters/pack
- NIOSH approved: P95
- Face piece not included, must be purchased separately
- Compatible with a variety of protective eyewear and hearing protection
- Designed for increased comfort and wearability
- Easy to use
Filter For Models 5000, 6000 and 7000 Series. Require #501 Pre-Filter Retainer. 10 Filters/ Box. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants.
Cartridges for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces.
- Defender: Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Methylamine, Formaldehyde Cartridge
Cartridges for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces.
- Organic Vapor and P100 Cartridge/Filter Combination
Cartridges for use with 5500 and 7700 Series half masks, and 5400 and 7600 Series full facepieces.
- Organic Vapor Cartridge
- LOW PROFILE: Lower proï¬le so cartridges don’t intrude into the work zone, see everything you need to see, even when doing close up detail work.
- EASY USER CHECK SEAL: Even with the smallest, most petite hands, you can achieve an easy user seal check. No struggling or using adapters to achieve a negative check.
- COMPATIBLE: Threaded connectors that ï¬t North by Honeywell half and full Air Purifying Respirators
- NIOH APPROVED ORGANIC VAPOR CARTRIDGE
- LONG SERVICE LIFE: Get the job done without frequent change outs.
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
3M Paint Respirator Supply Kit is used by professionals for certain paint spraying, solvents and pesticides. Designed for performance and comfort, 3M Paint Project Respirator features a balanced design for a more comfortable fit. 3M Paint Respirator Supply Kit is a great choice in respiratory protection for the pro.
- For workplace/occupational applications only
- Provides at least 95% filtration efficiency against solid and liquid aerosols including oils in additional to using it to help protect against certain organic vapors
- Swept back cartridges are positioned to enhance visibility
- Respirator kit contains (1) pair of 6001 cartridges, (1) pair of 501 retainers and (2) pair of 5P71 filters
- NIOSH approved: OV, P95
- Face piece not included, must be purchased separately
- Designed for increased comfort and wearability
- Easy to use
Plastic retainer used to attach either the 5N11 or 5P71 prefilters to 6000 series cartridge. 20 retainers in the box.
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
These Professional Multi-Purpose Replacement Respirator Cartridges are used with 3M 6000 or 7500 Series face pieces to help filter out toxic fumes and to prevent you from breathing in contaminants during workplace/occupational applications. Ideal for protection against certain mold, lead and sealant and coating sprays. Easy to use, 3M Replacement Cartridges are a great choice in respiratory protection for the professional.
- For workplace/occupational applications only
- Offers at least 99.97% efficiency against solid and liquid aerosols, including oils
- NIOSH approved: OV/AG/P100 (when used with NIOSH approved face piece)
- Always follow user instructions and inspect the respirator prior to use for cleanliness and defects
- Face piece not included, must be purchased separately
- Replace cartridge in accordance with an established change schedule or earlier if smell, taste or irritation from contaminants is detected
- We would recommend replacing the filter if it is dirty, damaged or difficult to breathe through
- Cartridges should not be washed and dried to be reused
- For use recommendations and protection advice, call 3M technical support team at 1.800.243.4630
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
It's important to keep your respirator working at proper performance. 3M Performance Cartridges Organic Vapor are designed to bring pros a quick and easy replacement solution when you're working with spray paints, solvents, pesticides and more. Give yourself and your crew respiratory protection with 3M Performance Cartridges Organic Vapor.
- NIOSH-approved for use against certain organic vapors
- For workplace/occupational applications only
- For particulate protection, combine a 3M P95 particulate filter (5P71) with a 3M501 retainer
- Great for use with spray/pesticides and latex, oil-based, automotive and spray paint
- Warning: Workplace/occupational applications: This respirator helps protect against certain airborne contaminants; misuse may result in sickness or death; for correct use, consult supervisor and user instructions or call 3M in U.S.A. at 1-800-243-4630; in Canada, call 1-800-267-4414
- Approved for use with 3M 6000, 6500 and 7500 series facepieces
- Recommended for use with varnishes/stains and certain solvent-based cleaners
- Easy-to-attach design
- Facepiece is not included
- Color: black
- Package contents: 1/pack
- Replacement part for paint and pesticide respirator kit
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
- Replacement part for paint and pesticide respirator kit
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. Designed to protect against a variety of gases, vapors and particulate hazards. When properly selected, cartridges and filters help provide protection from a variety of contaminants. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. ****OSHA regulations require gas proof goggles be worn with half face piece respirators when used against formaldehyde. (Not NIOSH approved for ozone.) Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges cannot be replaced.
For use with a 3M Half Face Piece Respirator 6000/7000 Series. Use with Paint, Chlorine Pool Chemicals, Dust, and More. For use with 3M Respirator Part Nos. 6191 (07001), 6291 (07002) and 6391 (07003).
North Pancake filters are a new dimension in high efficiency filtration. Lightweight low profile filter designed for under welding helmets and face shields. Meets NIOSH class P100 requirements by having a minimum efficiently of 99.97% in preventing particulates, including dust, mist and fumes, oil or non-oil based.
- Flexible low profile P100 filter
- For use under welding helmets
- 99.97% efficiency for all particulates
- Flexible enough to fit in even the tightest spots
- New dimension in high efficiency filtration with built-in seal check capability
- Sets a new standard in respiratory protection for profile, convenience and comfort
- Attachable as a prefilter to all North chemical cartridges
- Can be used under face shields