Safety Detection Devices
Kidde Ionization Smoke Detector with Battery Backup is an ionization-sensing alarm that offers 120 VAC of power with a 9-Volt battery backup for continuous protection during power outages. This alarm can operate as a single unit or as a component of an inter-connected system in your home or business. This important safety device has a push-button test capability to check its circuitry, horn and battery and can be put into a hush mode that will silence nuisance alarms. This unit has a tamper-resistant locking feature to help prevent unauthorized entry or theft.
- Utilizes ionization-sensing technology to detect smoke
- Sounds warning upon the incidence of smoke
- Hardwired smoke detector
- Rear battery installs back up
- Functions as a single unit or in an interconnected system
- Hush feature temporarily silences nuisance alarms
- Test button checks unit's electronic circuitry, horn and battery function
- 9-Volt battery provides protection during power outages
- Tamper-resistant locking pin helps deter alarm tampering and theft
- Alarm cap twists on and off for easy battery replacement
- Appropriate for residential or commercial applications
- Compatible with Kidde, FireX, Code One and Sentinel products
- *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
- Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
- Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available; when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
- UL/CSFM Ref. Kidde Part I12040
Kidde FireX i4618 is an AC/DC powered ionization smoke alarm that operates on a 120-Volt power source with 9-Volt alkaline battery back-up. Front load battery feature is easy access to the battery; you will not need to remove the alarm from the mounting bracket. When you need to replace battery simply slide the door, remove low battery and replace with new battery and slide door closed. This alarm can be interconnected with other Kidde devices in a multiple station arrangement.
- Ionization sensing alarms may detect invisible fire particles
- 85dB warning alarm
- Hush button feature allows you to immediately silence the alarm
- 9-Volt battery backup provides protection during power outages
- Large mounting base makes mounting easier
- Red LED will flash every 30-40 seconds
- Hush feature to silence nuisance alarms
- Batteries included
- Compatible with Kidde, FireX, Code One and Sentinel products
- *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
- Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
- Kidde offers a full range of 120VAC wire-in life safety products with interconnect capability to provide the most immediate and complete system available; when any 1 interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
- Kidde model i5000 is equipped with an alarm memory that provides a visual indication when an alarm has been activated
- UL/CSFM Ref. Kidde Part i5000
- Self-Flaring Fitting, No Flaring Tool Needed
- Solid Brass Fitting, Stainless Steel Insert
- Includes Split Rings
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Self-flaring design ensures versatile use
- Metal-to-metal seal for durable and reliable operations
- Features 33% more sealing surface than contemporaries
- Ideal replacement for a damaged or worn-out autoflare 3/4 in. fitting coupling
Kidde 0914E smoke alarm is a battery operated smoke alarm with an ionization sensor. This 4 in. unit is packaged with a 5 in. mounting plate. The 0914E is powered by a 9-Volt battery.
- Kidde 0914E is battery operated and includes a 9-Volt battery
- Kidde 0914E features a tests button to ensure unit functionality
- Kidde 0914E has low battery warning chirp that alerts user to change battery
- Kidde 0914E is a unique low profile 4 in. in diameter packaged with a 5 in. mounting plate
Universal Security Instruments SS-770-6CC Battery-Operated Ionization Smoke and Fire Alarms respond quickly to fast-flaming fires to protect your family against deadly threats in the home. These alarms come in a bulk pack of (6) and are operated by 9-volt batteries (included), all suitable for installation in houses, apartments, dormitory rooms and mobile homes. Fast and easy to install with no wiring required, the SS-770-6CC alarms feature audible low battery indicators and alarm/power test buttons to ensure that the devices are functioning properly. All hardware is included to mount the round and flat plates. These plates simplify installation. These smoke and fire alarms are UL Listed and Federal Housing Authority (FHA) approved to exceed industry standards. For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on all levels of the dwelling. Universal Security Instruments SS-770-6CC Battery-Operated Ionization Smoke and Fire Alarms come with a 5-year limited warranty.
- Ionization smoke and fire alarm
- Bulk 6-pack
- 9-Volt battery operated
- Loud 85 dB alarm
- Continued use after power outage
- Test/silence button
- Low battery indicator
- Swift installation process
- No additional wiring required
- Listed to UL217 standard
- 5-year limited warranty
- 2-in-1 smoke sensing technology makes conventional alarms obsolete
- Provides the benefits of both photoelectric and ionization technology in one alarm
- Responds 87% faster to slow smoldering fires and quickest to fast flaming fires
- This technology is industry's first true breakthrough smoke & fire alarm in over 30 years
- Virtually eliminates nuisance alarms caused by non-hazardous sources such as everyday cooking smoke & steamy showers
- Interconnectable up to 24 compatible devices
- Tamper resistant locking feature for battery and alarm
- 9V (backup) battery included
- UL listed to UL Standard 217 and California State Fire Marshal approved
- 10 Year Limited Warranty
- This technology is industry first true breakthrough smoke & fire alarm in over 30 years
The Kidde Wireless AC Powered Smoke Alarm makes it easy to expand the coverage of a current interconnected system. Simply replace 1 interconnected smoke alarm with the Kidde Wireless AC powered alarm. Kidde Wireless Battery Powered Smoke Alarms can be installed in additional rooms that need extra protection. This AC powered alarm bridges a home's current interconnected system to the newly installed alarms, so that when 1 alarm is triggered, all alarms will sound.
- Smoke detector requires hardwire installation
- 9-Volt battery backup provides protection during power outages
- 10-year limited warranty
- Alarm can also interconnect with RF-SM-DC (sold separately) via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
- When one interconnected unit sounds, it will trigger all other interconnected alarms, giving families more time to escape
- Only 1 RF-SM-ACDC unit is required per interconnected system, do not install more than 1 RF-SM-ACDC in any 1 system to avoid nuisance alarms
- Smart touch button temporarily silences nuisance alarms, low battery chirps and tests the operation of the unit and interconnected units
- Unit also includes a low battery warning utilizing a brief alarm chirp every 30-secounds to 40-seconds for a minimum of 7-days
- Ionization sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
- Interconnect is not required, this alarm also functions as a stand-alone smoke detector
- Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
- Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
- UL/CSFM reference Kidde part RF-SM-ACDC
- *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
- UL/CSFM Ref. Kidde Part RF-SM-ACDC