Safety Detection Devices

BRK has been the top choice of contractors in the commercial market for over 50 years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50%, and that's important because a home structure fire was reported every 86 seconds. The faster you know about a fire, the faster you can start moving your family outside. The 9120B hardwire alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. Plus, this alarm allows easy alignment with the perfect mount feature and comes with battery backup. This BRK 9120B Hardwire Smoke Alarm is an essential product in protecting those who matter most.

• Smart technology - helps reduce the number of nuisance alarms
• Latching alarm indicator - remembers which unit initiated an alarm
• 9-Volt battery backup
• Single test/silence button

i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9-Volt battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10-year limited warranty.

• Battery operated (9-Volt battery included) provides continuous protection even during power failures
• Test button verifies battery and alarm operation
• Low battery indicator chirps when battery needs replacement
• Easy installation no wiring required
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

Kidde FireX Hardwired 120-Volt Smoke Alarm is interconnectable with other hardwired alarms. The front battery pull tab allows battery activation without removing alarm from mounting bracket. The large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.

• 9-Volt battery backup provides protection during power outages
• 1-button design for easy operation and less confusion
• Ionization sensing technology detects the invisible fire particles associated with flaming fires
• Interconnectable with up to 24 devices
• Compatible with Kidde, fireX, code one and sentinel products
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde part #i12060

Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50% and that is important because a home structure fire was reported every 86 seconds. Whereas carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people do not know they are suffering from CO poisoning until it is too late. Symptoms of carbon monoxide poisoning are like the flu and you might not even know you"re in danger. The SC9120B hardwire alarm comes with 2-in-1 protection to detect CO you can"t see, smell or taste in the air, as well as first signs of a potential fire. This alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. It also includes battery backup for power outages and features a Test/Silence button to check if the alarm is functioning properly as well as silence unwanted or nuisance alarms. This BRK SC9120B Hardwire Smoke and Carbon Monoxide Alarm is an essential product in protecting those who matter most.

• 9-Volt alkaline battery backup
• Latching alarm indicator - remembers which unit initiated an alarm
• 2 silence features can silence the low-battery chirp for up to 8-hours or temporarily silence an unwanted nuisance alarm
• End of life signal provides audible notification alarms needs to be replaced
• Battery door lock and mounting bracket lock for tamper resistance
• Low-battery warning chirp and missing battery tab alert you when unit requires a new power source
• Quick plug-in power connector for easy installation
• Latching alarm indicator remembers which unit initiated an alarm
• America's most trusted brand in home safety

BRK Brands model SC9120LBL is a wire-in, 120-Volt AC/DC with 10-year lithium battery backup ionization smoke and electrochemical CO alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotel/motels, dormitories and other multi-family dwellings. Eliminate battery replacements and reduce maintenance costs for an entire decade. SC9120LBL has a factory-locked backup battery compartment in which residents cannot tamper with or remove. Properties remain protected without additional maintenance for the facilities maintenance team.

• 10-years battery backup - no battery change or battery maintenance required for 10-years, perfect for multi-family applications
• Dual sensor - ionization smoke sensor and electrochemical CO sensor
• Latching alarm indicator - remembers which unit initiated an alarm
• Single test/silence button
• End of life signal - provides audible notice when alarm needs to be replaced after 10-years

Kidde P3010L is a 10-year, sealed lithium battery, smoke alarm with photoelectric sensing technology and Smart Hush feature. The innovative design allows for automatic activation once the unit is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm needs replacement.

• Sealed-in lithium power supply; no battery replacement required over the 10-year life of the alarm; eliminates worry about battery removal or unauthorized deactivation of alarm
• Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Self-activation alarm automatically activates when attached to the mounting bracket
• End of life warning alarm chirps every 30-seconds to indicate the unit needs replacement
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P3010L

Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• Hardwired 120-volt power source with a 9-volt battery back-up
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Constant green LED light indicates that AC power is connected
• Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm, or is in hush mode
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part i4618AC

The sealed-in lithium battery design of the Kidde Lithium Battery Ionization Smoke Alarm affords you 10-year of service from this important safety device. Protect your home or business against the incidence of smoke or fire when you install this wireless alarm. The alarm sounds a warning to notify you of the presence of invisible fire particles it detects via its ionization-sensing technology. The alarm becomes automatically operational the instant it comes in contact with the mounting bracket and installation takes just minutes, thanks to its wireless design.

• Utilizes ionization-sensing technology to recognize presence of smoke
• Sounds early warning upon detection of smoke
• Smart hush temporarily silences nuisance alarms and activates only when in alarm mode
• Push-button testing checks circuitry, horn and battery function
• Sealed-in lithium battery requires no replacement over 10-year life of alarm
• Provides protection during power outages
• Red LED bulb flashes rapidly to alert that alarm has sounded since the last time test/reset button was used
• Activates automatically when attached to mounting bracket
• Installs easily
• Appropriate for residential or commercial applications
• UL/CSFM Ref. i9010

BRK has been the top choice of contractors in the commercial market for over 50 years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50% and that is important because a home structure fire was reported every 86 seconds. Whereas carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people do not know they are suffering from CO poisoning until it is too late. Symptoms of carbon monoxide poisoning are like the flu and you might not even know you"re in danger. The SCO2B alarm comes with 2-in-1 protection to detect CO you can"t see, smell or taste in the air, as well as first signs of a potential fire. This alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. It also features a Test/Silence button to check if the alarm is functioning properly as well as silence unwanted or nuisance alarms. This BRK SCO2B Smoke and Carbon Monoxide Alarm is an essential product in protecting those who matter most.

• 10-year CO sensor/10-year end of life
• 9-Volt alkaline battery powered
• 2 silence features: alarm silence to temporarily silence nuisance alarms, low battery silence to silence low battery chirp for up to 8 hours
• 2 latching features: alarm latch to easily identify initiating alarm after alarm condition has subsided, low battery latch: to visually identify which unit is in low battery condition

First Alert is the category leader in fire safety and delivers reliable life safety products that help our consumers protect what matters most through innovation and performance. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86-seconds. The faster you know about a fire, the faster you can start moving your family outside. The FG250B battery powered alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly, such as a grease or wastebasket fires. Plus, this alarm emits an 85 dB horn and Red LED light when smoke is detected. The First Alert, Family Gard FG250B Smoke Alarm is an essential product in protecting your home and family.

• Hinged cover for easy battery replacement
• Lighted power and alarm indicator
• Silence feature
• 9-Volt battery operated

The Kidde FireX P12040 Hardwire inter connectable Photoelectric Smoke Alarm with Battery Backup can act as a stand-alone unit or can be integrated into an existing electrical system. This unit sounds an early warning to alert you and your family of the presence of visible fire particles detected by the alarm's photoelectric sensor. Powered by 120-Volt AC, this alarm protects you, your home and the people you hold dear even during power outages, thanks to a 9-Volt battery backup. A power harness facilitates an easy installation and a simple push of a button activates this alarm's test and hush features.

• Utilizes photoelectric sensor to detect visible fire particles
• Sounds an early warning when smoke or fire particles are detected
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• 120-Volt AC, 2-wire connection
• Push-button operation tests alarm functionality
• 9-Volt battery backup provides protection during power outages
• 9-Volt battery included (21025730)
• Pull tab keeps battery fresh until initial activation
• Power harness makes installation fast and easy
• Compatible with Kidde, FireX, Code One and Sentinel products
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Dust cover protects sensor during construction
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part PE120

The Kidde FireX ACDC 120-Volt Carbon monoxide alarm detects carbon monoxide. This hardwired 120-Volt Inter Connectable Carbon Monoxide Alarm with 9-Volt Backup can be interconnected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included). The alarm has a fuel-cell design with a low-battery warning that issues a brief alarm chirp and a red LED light that will flash approximately every 15-seconds.

• Can be inter connected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included)
• Compatible with smoke alarms, carbon monoxide alarms and heat alarms on 1 wiring network (alarms and wiring sold separately)
• Smart inter connect system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when inter connected to a Kidde smoke alarm that is in alarm mode (smoke alarm sold separately)
• Fuel-cell design with a low-battery warning that issues a brief alarm chirp and red LED light that will flash approximately every 15-seconds
• Piezoelectric horn is rated at 85dB at 10 ft.
• Alarm will not sound if carbon monoxide levels are below 30 PPM
• 9-Volt battery backup provides protection during power outages
• Compatible with Kidde, FireX, Code One and Sentinel products
• Meets sensitivity requirements of UL 2034 single and multiple-station carbon monoxide alarms
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part KN-COB-IC

BRK has been the top choice of contractors in the commercial market for over 50-years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86-seconds. The faster you know about a fire, the faster you can start moving your family outside. The 7010B hardwire alarm works exceptionally well by using photoelectric sensor technology to detect smoldering fires that create a flameless form of combustion. Sources of these fires include cigarettes burning in couches or bedding. This alarm comes with 9-Volt battery backup and a single test and silence button. This BRK 7010B Hardwire Alarm is an essential product in protecting those who matter most.

• Photoelectric smoke sensing technology
• Latching alarm indicator
• Single button test/silence
• 9-Volt battery backup
• OptiPath 360 degree technology allows 360 degree access to the layer of air on the ceiling or wall that carries the fire signatures (smoke, combustion particles and volatile components)
• Locking feature for tamper resistance
• 85 dB alarm
• America's most trusted brand in home safety

The Kidde KN-COB-LP2 battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. Inside cover of battery door features quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.

• CO alarm alerts to increased levels of carbon monoxide
• Batteries included
• Test/reset: tests CO alarm circuit operation and allows you to immediately silence the alarm
• UL/CSFM reference# KN-COB-LP2

KN-COB-DP2 AC/DC carbon monoxide alarm plugs directly into your home's standard wall outlet making installation quick and easy. The 2-AA battery backup provides protection even during power outages when many CO incidences occur. The Kidde AC/DC carbon monoxide alarm has a 10-year limited warranty.

• Tamper resist feature can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet
• 2 AA battery backup provides continuous protection even during power outages
• Low battery hush - silences low battery chirp warning for up to 12-hours to maintain protection without having to replace the batteries at an inconvenient time
• 10-year end of life warning alerts user to replace CO alarm after 10-years of operation, (40% longer than other CO alarms
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model KN-COB-DP2

Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50% and that is important because a home structure fire was reported every 86-seconds. Whereas carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people do not know they are suffering from CO poisoning until it is too late. Symptoms of carbon monoxide poisoning are like the flu and you might not even know you"re in danger. The SC7010BV hardwire alarm comes with 2-in-1 protection to detect CO you can"t see, smell or taste in the air, as well as first signs of a potential fire. This alarm works exceptionally well by using photoelectric sensor technology to detect smoldering fires that create a flameless form of combustion. Plus, it comes with a 9-Volt battery backup for power outages and features voice location to help identify where the danger is. This BRK SC7010BV Hardwire Smoke and Carbon Monoxide Alarm is an essential product in protecting those who matter most.

• 10-year CO sensor/10-year end of life
• Voice alarm with programmable location, programmable with up to 11-locations
• 2 silence features can silence the low-battery chirp for up to 8-hours or temporarily silence an unwanted nuisance alarm
• 10-year limited warranty
• Interconnect with up to 18 alarms, 12 of which can be smoke alarms
• Latching alarm indicator remembers which unit initiated an alarm

2.5 Oz. Can Effectively Reach And Test Smoke Alarms Up To 7 Ft. Beyond The Extended Arm Of User. Gives Assurance That Alarm Is Actively Sampling The Air In Its Environments And The Smoke Detector Circuitry And Alarm Are Reacting Properly To The Danger Signs

Protect your family with the Kidde Firex Combination Smoke & Carbon Monoxide Detector. The ionization Kidde Firex Combination Smoke & Carbon Monoxide Detector operates on 2-AA alkaline batteries & front-load battery door provides easy installation. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, while the Kidde Carbon Monoxide Detector alerts of poisonous carbon monoxide gas, even during power outages. The Kidde Firex Combination Smoke & Carbon Monoxide Detector has voice alert that warns of fire, carbon monoxide, or low battery. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• Easy to install - powered by 2-AA batteries; no hardwiring required
• Protection during power outages and no low battery chirps
• Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery"
• 85 decibel fire alarm alerts of fire or carbon monoxide gas
• Smart hush-silences the unit during nuisance alarm situations
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Electrochemical sensor technology - detects poisonous carbon monoxide gas
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke and carbon monoxide detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part 900-0216A

BRK has been the top choice of contractors in the commercial market for over 50-years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until it's too late. Symptoms of carbon monoxide poisoning are like the flu and you might not even know you're in danger. The CO5120BN hardwire alarm detects the CO you can't see, smell or taste in the air. This alarm comes with 9-Volt battery backup, incase of a power outage. It also features a Test/Silence button to check if the alarm is functioning properly as well as silence unwanted or nuisance alarms. This First Alert CO5120BN Carbon Monoxide Alarm is an essential product in protecting your home and family.

• LCD digital display with memory
• 9-Volt alkaline battery backup
• Latching alarm indicator - remembers which unit initiated an alarm
• 2-silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm

The Universal Security Instruments MC304SB Carbon Monoxide Alarm provides 10-years of continuous protection against the silent killer - carbon monoxide. Perfect for new or replacement installations, this maintenance-free alarm is suitable for houses, apartments and mobile homes in every room. The sealed battery (included) will never have to be replaced throughout the life of the alarm, giving you a decade of peace of mind even in the event of a power outage. Permanent Power also saves money from battery replacements (up to $38.00 over the 10-year life of the alarm), eliminates annoying low battery chirps and helps the environment by reducing environmental waste from disposed batteries. This alarm features microprocessor intelligence to completely eliminate nuisance alarms, a single silence/test button to quiet a non-hazardous alarm and an end-of-service life warning that sounds when it's time to replace the battery (approximately 10-years from activation). Mount this alarm on the wall or leave it standing up on a table top. The quick activation battery pull tab makes it easy to install while the deactivation key switches the alarm off and makes the batteries safe for disposal. Once the alarm is deactivated, the tamper resistant feature turns on to prevent deactivated alarms from being reinstalled. This alarm is UL Listed, California State Fire Marshal approved and Federal Housing Authority (FHA) approved to exceed industry standards.

• Protect your family against the silent killer, carbon monoxide
• Provides 10-years of continuous protection against CO gas
• Tamper resistant design provides a higher level of Security
• Lithium-free alkaline permanent power prom Duracell Duralock is safer and more eco friendly
• Superior resistance to false alarms, no batteries to change, no battery chirps
• Quick find alarm origination feature easily identifies originating alarm to sound
• 10-year product end of service life warning sounds when it is time to replace detector
• 10-year limited warranty

The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time.

• Hardwired 120-volt power source with 10-year, lithium battery back-up
• Protection during power outages and no low battery chirps
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Smoke alarms will automatically activate when attached to the mounting bracket
• Green LED blinking lights indicate when: alarm has been initiated, is in hush mode, or powered by battery only
• Constant green LED light indicates that AC power is connected
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

• Alarm is easily installed in any of your AC wall outlets, giving you the choice of a direct-plug, a 6 power cord or a table top unit
• 6 ft. power cord included for table top option
• UL listed and offers a 7-year life and a 5-year limited warranty
• Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem
• Peak level memory
• Digital display
• 9-Volt battery backup provides protection during power outages
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM ref KN-COEG-3

The USI Electric 5304 Hardwired Ionization Smoke and Fire Alarm responds quickly to fast-flaming fires to protect your family against deadly threats in the home. Perfect for new or replacement installations, the 120-volt AC hardwired alarm is suitable for houses, apartments and mobile homes. Quick Find alarm origination identifies the first alarm to sound in an interconnected system and the single silence/test button temporarily quiets nonemergency alarms. The 9-volt alkaline battery (included) provides continuous protection in the event of a power outage. This alarm also features a quick activation pull-tab and a front-loading battery drawer for replacement without removing the alarm from the bracket. Mount the bracket to any standard wiring junction box and use the large mounting base to cover imperfections in drywall. The plastic dust cover protects the alarm from debris and (2) tamper-resistant locks prevent unwanted alarm or battery removal. For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on all levels of the dwelling.

FEATURES:

• Fully interconnectable with all USI and Universal 120V alarms using existing wiring and mounting
• Features a quick activation pull-tab and a front-loading battery drawer for replacement without removing the alarm from the bracket
• Interconnectable up to 24 compatible devices
• Tamper resistant locking feature for battery and alarm
• 9V (backup) battery included
• Comes with a 3 year warranty on

BRK Brands model 7010LBL is a wire-in, 120-VOLT AC/DC with 10-Year Lithium Battery Backup photoelectric smoke alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotel/motels, dormitories and other multi-family dwellings. Eliminate battery replacements and reduce maintenance costs for an entire decade. 7010LBL has a factory-locked backup battery compartment in which residents cannot tamper with or remove. Properties remain protected without additional maintence for the facilities maintenance team. This unit can be interconnected with up to 18 devices and has unique features which easily identify an initiating alarm even after alarm condition has subsided. Connection to AC power is made with a "quick-connect" wiring harness so installing process is quick, easy and cost effective.

• 10-year battery backup - no battery change or battery maintenance required for 10-years
• Photoelectric smoke sensing technology - generally more sensitive at detecting large smoke particles, perfect for small spaces
• Latching alarm indicator - remembers which unit initiated an alarm
• 2 locking features - factory-locked pins are in place to lock battery drawer and/or alarm to base, perfect for apartment, dormitory or hotel applications
• Single test/silence button