Safety Detection Devices

The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time.

• Hardwired 120-volt power source with 10-year, lithium battery back-up
• Protection during power outages and no low battery chirps
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Smoke alarms will automatically activate when attached to the mounting bracket
• Green LED blinking lights indicate when: alarm has been initiated, is in hush mode, or powered by battery only
• Constant green LED light indicates that AC power is connected
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

he Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor - which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires - with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires, and significantly reduces the potential for a nuisance alarm.The i12010SCO contains a 10-year tamper proof backup battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke, fire and carbon monoxide, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The end of life chirp can be temporarily silenced, allowing for replacement at a more convenient time.

• Hardwired 120-volt power source with 10-year, lithium battery back-up
• Protection during power outages and no low battery chirps
• Test/hush button: silences the unit for approximately 9 minutes
• Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery"
• Peak level carbon monoxide memory
• 85 decibel fire alarm alerts of fire or carbon monoxide gas
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Electrochemical sensor technology - detects poisonous carbon monoxide gas
• Interconnection capability with other Kidde devices (maximum of 24)
• Green LED blinking lights indicate when: alarm has been initiated, is in hush mode, or powered by battery only
• Constant green LED light indicates that AC power is connected
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM ref. i120sco

i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9-Volt battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10-year limited warranty.

• Battery operated (9-Volt battery included) provides continuous protection even during power failures
• Test button verifies battery and alarm operation
• Low battery indicator chirps when battery needs replacement
• Easy installation no wiring required
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

Kidde FireX Hardwired 120-Volt Smoke Alarm is interconnectable with other hardwired alarms. The front battery pull tab allows battery activation without removing alarm from mounting bracket. The large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.

• 9-Volt battery backup provides protection during power outages
• 1-button design for easy operation and less confusion
• Ionization sensing technology detects the invisible fire particles associated with flaming fires
• Interconnectable with up to 24 devices
• Compatible with Kidde, FireX, Code One and Sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available; when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde part #i12060

The sealed-in lithium battery design of the Kidde Lithium Battery Ionization Smoke Alarm affords you 10-year of service from this important safety device. Protect your home or business against the incidence of smoke or fire when you install this wireless alarm. The alarm sounds a warning to notify you of the presence of invisible fire particles it detects via its ionization-sensing technology. The alarm becomes automatically operational the instant it comes in contact with the mounting bracket and installation takes just minutes, thanks to its wireless design.

• Utilizes ionization-sensing technology to recognize presence of smoke
• Sounds early warning upon detection of smoke
• Smart hush temporarily silences nuisance alarms and activates only when in alarm mode
• Push-button testing checks circuitry, horn and battery function
• Sealed-in lithium battery requires no replacement over 10-year life of alarm
• Provides protection during power outages
• Red LED bulb flashes rapidly to alert that alarm has sounded since the last time test/reset button was used
• Activates automatically when attached to mounting bracket
• Installs easily
• Appropriate for residential or commercial applications
• UL/CSFM Ref. i9010

This Kidde 10-Year combination smoke and carbon monoxide detector is easy to install and alerts your family when a fire or elevated carbon monoxide levels are detected in your home. Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms. Combination alarms should be placed outside each sleeping area and on every level of the home. This alarm is powered by a 10-Year sealed-in, non-replaceable lithium ion battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10 years.

• Smoke and carbon monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home and in other locations where required by law
• Reduces nuisance alarms by adjusting smoke sensitivity when carbon monoxide is not detected to better discriminate between a real hazard and a false one
• 10-year lithium ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps; internal timer alerts you to replace the entire unit after 10-years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarm features a photoelectric sensor which may detect visible fire particles (associated with slow smoldering fires) sooner than ionization sensors
• Alarm uses electrochemical sensor to detect carbon monoxide
• 10-year limited warranty
• UL/CSFM reference model P3010K-CO

Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• Hardwired 120-volt power source with a 9-volt battery back-up
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Constant green LED light indicates that AC power is connected
• Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm, or is in hush mode
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part i4618AC

Kidde P3010L is a 10-year, sealed lithium battery, smoke alarm with photoelectric sensing technology and Smart Hush feature. The innovative design allows for automatic activation once the unit is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm needs replacement.

• Sealed-in lithium power supply; no battery replacement required over the 10-year life of the alarm; eliminates worry about battery removal or unauthorized deactivation of alarm
• Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Self-activation alarm automatically activates when attached to the mounting bracket
• End of life warning alarm chirps every 30-seconds to indicate the unit needs replacement
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P3010L

The Kidde KN-COB-LP2 battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. Inside cover of battery door features quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.

• CO alarm alerts to increased levels of carbon monoxide
• Batteries included
• Test/reset: tests CO alarm circuit operation and allows you to immediately silence the alarm
• UL/CSFM reference# KN-COB-LP2

This Kidde 10-Year carbon monoxide detector is easy to install and alerts your family when elevated carbon monoxide levels are detected in your home. This alarm is powered by a 10-Year sealed-in, non-replaceable lithium ion battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10 years.

• Carbon Monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home, and in other locations where required by law
• 10-year lithium ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarm uses electrochemical sensor to detect carbon monoxide
• 10-year limited warranty
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model C3010

The Kidde FireX ACDC 120-Volt Carbon monoxide alarm detects carbon monoxide. This hardwired 120-Volt Inter Connectable Carbon Monoxide Alarm with 9-Volt Backup can be interconnected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included). The alarm has a fuel-cell design with a low-battery warning that issues a brief alarm chirp and a red LED light that will flash approximately every 15-seconds.

• Can be inter connected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included)
• Compatible with smoke alarms, carbon monoxide alarms and heat alarms on 1 wiring network (alarms and wiring sold separately)
• Smart inter connect system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when inter connected to a Kidde smoke alarm that is in alarm mode (smoke alarm sold separately)
• Fuel-cell design with a low-battery warning that issues a brief alarm chirp and red LED light that will flash approximately every 15-seconds
• Piezoelectric horn is rated at 85dB at 10 ft.
• Alarm will not sound if carbon monoxide levels are below 30 PPM
• 9-Volt battery backup provides protection during power outages
• Compatible with Kidde, FireX, Code One and Sentinel products
• Meets sensitivity requirements of UL 2034 single and multiple-station carbon monoxide alarms
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part KN-COB-IC

The Kidde FireX P12040 Hardwire inter connectable Photoelectric Smoke Alarm with Battery Backup can act as a stand-alone unit or can be integrated into an existing electrical system. This unit sounds an early warning to alert you and your family of the presence of visible fire particles detected by the alarm's photoelectric sensor. Powered by 120-Volt AC, this alarm protects you, your home and the people you hold dear even during power outages, thanks to a 9-Volt battery backup. A power harness facilitates an easy installation and a simple push of a button activates this alarm's test and hush features.

• Utilizes photoelectric sensor to detect visible fire particles
• Sounds an early warning when smoke or fire particles are detected
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• 120-Volt AC, 2-wire connection
• Push-button operation tests alarm functionality
• 9-Volt battery backup provides protection during power outages
• 9-Volt battery included (21025730)
• Pull tab keeps battery fresh until initial activation
• Power harness makes installation fast and easy
• Compatible with Kidde, FireX, Code One and Sentinel products
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Dust cover protects sensor during construction
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM Ref. Kidde Part PE120

The Kidde PI2010 is a 120-Volt AC, wire-in smoke alarm with 9-Volt battery backup. This smoke alarm functions as a stand-alone unit or in an interconnected system. The Kidde PI2010 features Hush, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

• Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
• Ionization sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
• Photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Battery backup (9-Volt battery included) provides continuous protection even during power outages
• Tamper resistant deters from tampering or theft
• Hush feature temporarily silences nuisance alarms
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes ionization and photoelectric sensors to detect fire hazards and sounds an 85 db alarm when a hazard is detected

KN-COB-DP2 AC/DC carbon monoxide alarm plugs directly into your home's standard wall outlet making installation quick and easy. The 2-AA battery backup provides protection even during power outages when many CO incidences occur. The Kidde AC/DC carbon monoxide alarm has a 10-year limited warranty.

• Tamper resist feature can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet
• 2 AA battery backup provides continuous protection even during power outages
• Low battery hush - silences low battery chirp warning for up to 12-hours to maintain protection without having to replace the batteries at an inconvenient time
• 10-year end of life warning alerts user to replace CO alarm after 10-years of operation, (40% longer than other CO alarms
• Many cities and states have created legislation requiring smoke alarms or specific types of smoke alarms in various settings. Certain laws also specify when homes need carbon monoxide alarms or other safety products. Understanding your local requirements can help you keep your home safe from the dangers of fire.
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model KN-COB-DP2

Combination smoke/carbon monoxide alarm emits a distinct voice alarm to prevent confusion in an emergency. Easy-to-install design does not require any additional wiring for convenient use. Battery-operated construction provides further assurance during a power outage.

• Detects both smoke and carbon monoxide
• Emits a voice alarm to eliminate confusion
• Offers test/reset button and flashing LED to verify alarm operation
• Easy install, no wiring needed
• Contains a hush feature to temporarily silence false alarms

The P4010DCS-W is a 10-year, sealed battery smoke alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event and helps reduce confusion with verbal announcements such as Replace alarm at end of alarm life and Hush mode activated when a nuisance alarm is silenced. The 3 color LED ring helps users quickly determine standby, alarm or error mode of the alarm.

• 10-year sealed lithium battery eliminates late night battery chirp
• Voice notifications
• Flashing LED status ring allows easy identification of current state of alarm
• Bug screen protects alarm from insect ingression
• Additional benefits and features are available when used in conjunction with the Kidde RemoteLync bridge, which connects P4010 wire-free alarms via your homes Wi-Fi to your smart device
• 10-year limited warranty
• Interconnect with up to 24 Kidde devices
• Home security protection can be added with use of the Kidde RemoteLync camera, once triggered, a camera will send an alert to the bridge and each alarm in the home will announce, intruder detected
• Note: intruder and weather alerts require Wi-Fi connection through bridge
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference# P4010DCS-W

Protect your family with the Kidde Firex Combination Smoke & Carbon Monoxide Detector. The ionization Kidde Firex Combination Smoke & Carbon Monoxide Detector operates on 2-AA alkaline batteries & front-load battery door provides easy installation. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, while the Kidde Carbon Monoxide Detector alerts of poisonous carbon monoxide gas, even during power outages. The Kidde Firex Combination Smoke & Carbon Monoxide Detector has voice alert that warns of fire, carbon monoxide, or low battery. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• Easy to install - powered by 2-AA batteries; no hardwiring required
• Protection during power outages and no low battery chirps
• Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery"
• 85 decibel fire alarm alerts of fire or carbon monoxide gas
• Smart hush-silences the unit during nuisance alarm situations
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Electrochemical sensor technology - detects poisonous carbon monoxide gas
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke and carbon monoxide detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part 900-0216A

PE9050 is a battery-operated smoke alarm, equipped with a photoelectric sensor, designed to alert you and your family to the dangers of smoke and fire. The P9050 includes a 9-Volt battery, providing you protection even during a power failure. This unit is UL Listed and offers a 10-year limited warranty. This alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms.

• Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Test button tests unit is electronic circuitry, horn and battery function
• Battery operated (9-Volt battery included) protects even during a power outage
• Low battery indicator smoke alarm will chirp in the event of a low battery
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part #P9050 (Previous UL# PE9)

The P4010DCSCO-W is a 10-year, sealed battery smoke and carbon monoxide (CO) alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event, and helps reduce confusion with verbal announcements such as "Replace alarm" at end of alarm life, and "Hush mode activated" when a nuisance alarm is silenced. The three color LED ring helps users quickly determine standby, alarm, or error mode of the alarm.Kidde P4010 Series Alarms contain 10-year tamper proof batteries that eliminate the need for battery replacement, and ends worry over unauthorized removal. Users are further shielded from late night battery chirps by the unit's Ambient Light Sensing feature, which establishes a day/night cycle and prevents alarm chirping in dark conditions.Wire-Free Interconnect triggers each connected alarm in the home to sound once smoke is detected, which can provide more time to react. The National Fire Alarm and Signaling Code (NFPA 72) has required smoke alarms in new homes to be interconnected since 1989, which traditionally involves running wiring to each alarm. Older and remodeled homes can now be updated to current standards without having to run any wiring to each alarm through walls and ceilings. Existing networks of interconnected alarms can be expanded with use of a single AC Wire-Free Alarm and additional compatible DC Wire-Free alarms.

• Sealed-in Lithium Battery: No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
• Voice Notifications: Unit verbally announces, "Fire!" and other alerts such as, "Replace Alarm," which helps the user better understand current status of the unit.
• Bug Screen: Protects alarm from insect ingress
• Supervised Wire-Free Interconnect: Proprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound. User is alerted if an alarm loses connection to the network.
• 10-Year Sealed Lithium Battery: Eliminates late night battery chirp
• 10-Year Limited Warranty
• End of Unit Life Warning: Alerts user the alarm is in need of replacement.
• Test / Hush Button: Tests alarm circuitry and activates Hush feature to temporarily silence nuisance alarms for up to 10 minutes. End of Unit Life and Network Error chirps can also be silenced.
• Alarm Locate Feature: Quickly find initiating alarm by silencing other alarms in the network.
• Ambient Light Sensing: Establishes Day/Night cycle and prevents chirping during the night until the next Day cycle begins.
• Intelligent Sensor Technology: Reduces nuisance alarms and offers fast response to real fires.
• Easy to Install: Simply turn the switch on the back of unit or mount to bracket to activate the alarm. Multiple units can be interconnected with push of one button.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available when any single interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010DCSCO-W

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

• Alarm is easily installed in any of your AC wall outlets, giving you the choice of a direct-plug, a 6 power cord or a table top unit
• 6 ft. power cord included for table top option
• UL listed and offers a 7-year life and a 5-year limited warranty
• Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem
• Peak level memory
• Digital display
• 9-Volt battery backup provides protection during power outages
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM ref KN-COEG-3

Kidde Ionization Smoke Detector with Battery Backup is an ionization-sensing alarm that offers 120 VAC of power with a 9-Volt battery backup for continuous protection during power outages. This alarm can operate as a single unit or as a component of an inter-connected system in your home or business. This important safety device has a push-button test capability to check its circuitry, horn and battery and can be put into a hush mode that will silence nuisance alarms. This unit has a tamper-resistant locking feature to help prevent unauthorized entry or theft.

• Utilizes ionization-sensing technology to detect smoke
• Sounds warning upon the incidence of smoke
• Hardwired smoke detector
• Rear battery installs back up
• Functions as a single unit or in an interconnected system
• Hush feature temporarily silences nuisance alarms
• Test button checks unit's electronic circuitry, horn and battery function
• 9-Volt battery provides protection during power outages
• Tamper-resistant locking pin helps deter alarm tampering and theft
• Alarm cap twists on and off for easy battery replacement
• Appropriate for residential or commercial applications
• Compatible with Kidde, FireX, Code One and Sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available; when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde Part I12040

This Kidde 120-Volt Hardwired Voice Warning Smoke Alarm with Wire-Free Interconnect and 10-year Lithium Battery Backup features voice alert, wireless interconnectivity, and a sealed-in 10-year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces "Fire" if a hazard is detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.

• Smoke alarm requires hardwire installation
• 10-year battery backup provides protection even during power outages
• Hardwire Interconnect can create a network of Alarms without additional wiring
• Alarm can interconnect with other Kidde 10-year Wi-Fi Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wi-Fi interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected
• End of life warning reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• Remotelync SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone smoke detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010ACS-W

Get the ability to alert your family of any potential smoke related threats with the Kidde battery-operated combination smoke and carbon monoxide detectors. The alarms have a voice warning that announce the type of hazard detected, making them great for bedrooms. The installation is easy and only 2 AA batteries are required. Be sure to place the alarms on every level of the home and outside each sleeping area.

• Smoke and carbon monoxide detectors should be installed in a central location outside each sleeping area, on every level of the home and in other locations where required by law
• Voice alert announces the type of hazard, ideal for bedrooms
• Voice alarm announces fire when a smoke or fire hazard is detected and warning carbon monoxide when CO is detected
• Smart hush feature temporarily silences nuisance alarms and low battery chirps
• Front-load battery compartment makes it easy to replace the alarm's AA batteries
• At the end of the alarm's life, the unit will chirp to indicate that it's time to replace the entire unit
• Alarms are equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Green LED light indicates that the alarm is working properly
• Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Alarm uses electrochemical sensor to detect carbon monoxide
• 7-year limited warranty
• AA batteries included
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke and carbon monoxide detectors utilize an ionization sensor to detect fire hazards and sound an 85 db. alarm when a hazard is detected

The digital readout of the Kidde Plug-In Digital Carbon Monoxide Alarm with 9-Volt Backup continuously displays carbon monoxide levels from 30 to 999 parts per million (PPM) and will sound an 85dB alarm when dangerous levels are reached. The carbon monoxide level sensed is continuously displayed and updated every 15-seconds and the peak level memory shows the highest level of carbon monoxide present since the last time the unit was reset or unplugged. Protection continues during power outages thanks to a 9-Volt battery backup.

• Plug-in carbon monoxide detector with digital readout
• 85dB alarm sounds when carbon monoxide reaches dangerous levels so you can protect your family
• Test/reset button to check for proper operation and reset the unit
• 9-Volt battery backup provides protection during power outages
• Displays carbon monoxide levels from 30 to 999 PPM
• Updates digital reading every 15-seconds
• Peak level memory displays highest carbon monoxide level recorded since previous reset or unplugging
• Plugs into AC receptacles
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.