Straight Stops

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in Pipe Insertion Depth = 15/16 in.

1/2 in. Nom Comp Inlet x 3/8 in. OD Comp Outlet 1/4-Turn Straight Ball Stop. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.

• Machined 1-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Precision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use
• Blow-out proof, plated stem is assembled from the inside with double O-Rings to help ensure safe, reliable performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested to ensure reliable, leak-free performance

The Homewerks 1/2 in. FIP x 3/8 in. O.D. compression multi-turn angle shut-off valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn the water off to the entire home. The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this straight shut-off valve from Homewerks.

• Straight shut off valve 1/2 in. nominal compression x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome finish
• Compatible with faucets, toilets and dishwashers
• Limited lifetime warranty
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• NSF/cUPC/ANSI 61 certified

BrassCraft 1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
• Machined, 1-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Temperature rating: 40 degree to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• Designed, machined and assembled in the USA

The Homewerks Worldwide 1/2 in. nominal compression x 1/2 in. O.D. compression multi-turn angle shut-off valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.

• 1/2 in. FIP x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with iron pipe
• Chrome finish
• Compatible with faucets, toilets, and dishwashers
• Limited lifetime warranty

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

3/8 in. O.D. Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Straight Shut-Off Valve, Chrome

• 3/8 in. O.D. compression x 3/8 in. O.D. compression straight valve
• Multi turn operation
• Straight supply stop valve
• Chrome plated brass
• Compatible with faucets, toilets and dishwashers
• For copper pipe installations
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

BrassCraft 1/2 in. Nom CPVC Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with CPVC
• Machined, 1-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Temperature rating: 40 degree to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA Listed to ASME A112.18.1 / CSA B125.1

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 In. FIP Inlet x 3/8 In. OD Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Iron Pipe
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

The Homewerks 3/8 in. O.D. Compression x 3/8 in. O.D. Compression multi-turn turn straight supply stop controls water flow to faucets, toilets, and dishwashers. This chrome plated brass supply stop is used where the water pipe enters the room from the floor or wall.

• 3/8 in. O.D. compression x 3/8 in. O.D. compression straight valve
• Quarter turn operation
• Straight supply stop valve
• Chrome plated brass
• Compatible with faucets, toilets, and dishwashers
• For copper pipe installations

The Homewerks 1/2 in. FIP x 3/4 in. MHT Quarter-Turn Angle Shut-Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut off valve from Homewerks.

• 1/2 in. female iron pipe x 3/4 in. male hose thread supply stop
• Angle valve
• Chrome plated brass
• Quarter turn operation
• Compatible with faucets, toilets, and dishwashers
• For iron pipe installations
• Male hose thread outlet
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free Certified

The Homewerks 1/2 in. nominal compression inlet x 3/4 in. male hose thread outlet quarter turn angle valve supply stop controls water flow to faucets, toilets and dishwashers. This chrome plated brass supply stop is used where the water pipe enters the room from the floor or wall.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut off valve from Homewerks.

• 1/2 in. nominal compression inlet x 3/4 in. male hose tread outlet
• Angle valve
• Chrome plated brass
• Quarter turn operation
• Compatible with faucets, toilets and dishwashers
• For copper pipe installations
• Male hose thread outlet
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

The Homewerks Worldwide 1/2 in. FIP x 3/8 in. O.D. Compression Multi-Turn Angle Shut-Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.

• 1/2 in. sweat inlet x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome finish
• Compatible with faucets, toilets, and dishwashers
• Limited lifetime warranty

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe

CPVC Supply Valve made for controlling water supply and/or shut off. This product is made from high grade materials that are Lead Free. Item manufactured in the USA for highest quality.

• Product is lead free rated for use in hot- and cold-water distribution systems
• Do not use with compressed air or gasses
• UPC code approved
• Molded in the USA

BrassCraft Toilet Supply Kit everything you need to connect your water supply to your toilet. Components include: (1) 1/2 in. Nominal Sweat inlet x 3/8 in. O.D. Compression outlet multi-turn straight water shut-off valve with 5 in. Sweat Extension Tube (1) 3/8 in. O.D. x 12 in. L copper riser and (1) bell flange. Straight valves are most often used when the water pipe enters the room from the floor. 5 in. extension tube slides over existing 1/2 in. nominal copper water pipe, sweat connection into place. Extension tube may be cut to required length using a tube cutter. All components are chrome-plated for a clean professional appearance.

• Kit includes: (1) 1/2 in. nominal sweat x 3/8 in. O.D. compression multi-turn straight valve with 5 in. extension tube, (1) 12 in. toilet riser and (1) bell escutcheon
• Valve compatible with 1/2 in. nominal (5/8 in. O.D.) copper pipe
• 5 in. extension tube slides over existing 1/2 in. nominal copper pipe, sweat connection, may be cut to required length
• Valve has a machined, 1-piece brass body for strength, durability and long-lasting performance
• Valve controls water flow with a few turns of the handle
• 3/8 in. O.D. x 12 in. riser features standard gasket nosepiece
• Riser is cut-to-length for flexible fit and clean, professional appearance
• Chrome finish
• For use in potable water distribution systems in accessible locations only
• Temperature rating: 40 degree F to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

Multi-turn straight valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. Easy-to-remove handle protects against accidental operation during rough-ins.

• Withstand temperatures up to 180 degree F
• Pressure up to 125 psi
• Do not over-tighten
• 1 year warranty against defect
• Lead free
• Oval-knurled handle

1/4 Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Borged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 In. Nom Sweat Inlet x 3/8 In. OD Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Rough brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA