Commercial & Specialty Sinks
Item is a 2 in. Floor Interceptor. PVC Screen, Sediment Bucket, Cover, Latches and Hardware. Floor Interceptor, Solids, 2 in. Pipe Diameter, Overall Diameter: 8-7/16 in., 12-1/2 in. H, Lid 7-1/2 in., Material of Construction Zinc, Pac, Steel, Color/Finish Mill, Connection Threaded, Includes PVC Screen, Sediment Bucket, Cover, Latches and Hardware.
- PVC screen
- Sediment bucket included
- Cover and latches included
- Hardware included
- 2 in. pipe diameter
- Diameter: 8-7/16 in.
- 12-1/2 in. H
- Lid: 7-1/2 in.
- Material of construction zinc, PVC, steel
- Color/finish: mill
Murdock model GWJ85 series is a round pedestal mounted Hand Wash. It is barrier free and vandal resistant. It is made from 16-Gauge, type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit shall be activated by a 9-Volt DC Hands Free Sensor Faucet. The faucet has a 0.5 GPM Laminar flow outlet to minimize splashing. This model complies with ANSI A117.1, Public Law 111-380 (NO LEAD), CHSC 116875; Fixture meets ADA requirements.
- ADA compliant (when properly installed)
- Resistant to sunlight, heat, moisture and wear
- Hands free sensor hand washing faucet
- Stainless steel construction for durability and easy cleaning
- Maintenance-friendly design
- Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
- Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
- Cap over drain to reduce airborne germs
This deluxe splash guard is designed as an accessory to the PS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any PS1000 series sink.
- Splash guard includes mounting hardware
- Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
- Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
- Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
- Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
- Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
- 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
- Mounting hardware is included for the splash guard, paper holder and soap caddy
- Unit is easily mounted to the rear and sides of any PS1000 series sink
- All sharp edges are broken
This Undermount Group ADA compliant double compartment 18 in. x 32 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Polished with a satin blended number 4-finish, with highlighted bowl rim
- Conforms to ASME/ANSI A112.19.3M
This 6.5 Gal. waste-water tank is designed as an accessory to the EPS1000 series sinks. The intent is to provide wastewater source for the portable sink. This HDPE plastic tank is not imported.
- Waste-water tank is designed as an accessory to the EPS1000 series sinks
- Tank collects waste water source for the portable sink
- Made of FDA approved high density polyethylene (HDPS) plastic
- Durable, rust and dent-proof
- 6.5 Gal. (24 l) capacity
- Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
- Not UN rated
- Convenient back and top handles for easier pouring
- Spout is self-venting
- Tank can be recycled
This Undermount Group single compartment 18 in. x 24 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
- Deep bowl
BRADLEY WASHFOUNTAIN
- Suitable for heavy duty hand washing
- Air valve metering, infrared activation, or TouchTime® mechanical metering
- Terreon and TerreonRE are resistant to chemicals, stains, burns, and impact
- Accommodates up to 8 users at a time
This Stylist Group single bowl 20 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
This Stylist Group ADA compliant single bowl 20 in. x 19 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
Bradley Sentry Wash Fountain is made of stainless steel (60% recycled content) and comes completely pre-assembled for ease of installation. This model utilizes an infrared activation to provide handsfree use for the end user. The Sentry saves water, floor space and time with just one water and one waste connection.
- Infrared activation
- Wall mounted
- 36 in. stainless steel bowl size
- Highly vandal resistant
- ADA compliant
- cUPC approval
This Stylist Group single bowl 20 in. x 19 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
This Undermount Group single compartment 18 in. x 21 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
- Hose models provide convenient hand-washing anywhere a hose can reach
- Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
- Touchless sensor faucet reduces the spread of bacteria
This Undermount Group single compartment 16 in. x 20 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model provides a connection to 3/4 in. hose for fresh water. Access for the hose is provided behind the unit. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
- Hose models provide convenient hand-washing anywhere a hose can reach
- Handle faucet for manual activation
- Faucet has gooseneck spout
This Stylist Group single deep bowl 22" x 17" drop-in sink with rear ledge, from Just Manufacturing, is 100% Made in USA. It is a seamless die-drawn construction of 18 gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4" radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300-series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
This Stylist Group single bowl 20 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300-series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
- Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
- Handle faucet for manual activation
- Faucet has gooseneck spout
This Undermount Group single compartment 18 in. x 24 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
This Stylist Group single bowl 19 in. x 21 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
36 in. Bradley Classic Bradstone Washfountain. The unit comes pre-assembled bowl and pedestal. Can accommodate up to 5-users at a time using only 2 Gal. per minute of water.
- 36 in. Bradstone resist stains and damage
- Pre-assembled bowl and pedestal
- 1-water supply hook up and one waste hookup
- Foot control for easy activation
- Operates at water pressure of 20-80 psi
- Highly vandal resistant
Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
- Hose models provide convenient hand-washing anywhere a hose can reach
- Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
- Touchless sensor faucet reduces the spread of bacteria
This Stylist Group ADA compliant single bowl 20 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M