Sensor Product Repair
SLOAN G2 OPTIMA Plus EBV-136-A Solenoid assembly. Our products perform at their highest levels when maintained exclusively using SLOAN Genuine Parts. We offer the largest selection of parts, manufactured and tested to SLOAN specifications. Best-in-class parts, specifically designed for the most reliable commercial restroom products, means fewer repairs, protecting your investments.
- Solenoid assembly
- G2 modules only
- EBV-136-A
- SLOAN OEM parts
Sloan G2 OPTIMA Plus Ebv-120-A-C Electronic Sensor Module
Sloan Etf-1009-A Solenoid Valve Repair Kit 3305577
- Solenoid valve repair kit for optima series sensor faucets
- Repair kit is also compatible with the Sloanstone EW-4200 lavatory sink
- Kit includes replacement filter, guide, armature spring, diaphragm and washer
- Compatible with optima series ETF and ELF series units
Sloan G2 OPTIMA Plus EBV-129-A-U Electronic Sensor Module
The ETF-370-A is a 24 VAC Solenoid Assembly. This assembly includes an 18 in. (457 mm) armored cable and two (2) Terminal Housings. The ETF-370-A is used on SLoan ETF-610 & ETF-600 Sensor Operated Faucets.
- Used on hardwired Faucets
- Brass construction
- For Sloan sensor facuets
- Readily available
- ETF-740-A
- For battery faucets with existing gray control module
- Made of high-quality materials for durability
- Designed for battery faucets with an existing gray control module
- Features armored cable and wire
- Solenoid valve turns air and water on and off according to the level of resistance in the control circuit
OPTIMA Bathroom Commercial Flushometer Replacement Part EL-124-2 CP Solenoid Assembly 24V
- Made from premium-quality materials for durability
- Designed for exposed installation
- Includes handle coupling, 24 VAC coil, faceplate, nut, adapter, shaft assembly, housing, flux plate, and O-ring
- Designed to ensure optimum functioning
Solenoid Valve Cartridge for the i.q. Faucet EAF-2.
The dual patented filter rings on the Dual Filtered Diaphragm prevent sediment from reaching the bypass. This results in clog-free operation, eases valve maintenance, and reduces water usage. The Dual Filtered Diaphragm is factory assembled
The EBV-146-A is the Electronic module and solenoid replacement for top mount battery Sloan Flushometers. The EBV-146-A comes with 4 AA Alkaline Duracell batteries factory installed. This product also houses the sensor eye inside the module.
- Used on G2 series flushometers
- Uses 4 AA batteries
- Plastic construction
- Has sensor
OPTIMA G2 complete cover, ring, sensor, assembly.
- COVER
- RING
- SENSOR
- ASSEMBLY
Sloan Faucet/Sensor Assembly For Ebf-85
- Faucet assembly only
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Zurn's replacement sensor assembly (Part no. PEMS6000-26A) is designed for ZEMS sensor urinal valves. ZEMS hardwired flush valves provide consistent and reliable motorized operation, detecting the user with precision for high-performance flushing operation. They feature a quiet GO BLUE diaphragm with a clog-resistant bypass and chloramine-resistant seals for an extended lifespan and lower maintenance costs. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- Fits ZEMS sensor urinal
- ZEMS flush valves are hardwired for reliable hands-free operation
- Robust solution for replacement or repair
- Ideal for commercial applications
- Plastic, Zinc Wall Sensor, Chrome/Black
- 24 VAC - 50/60 Hz operating voltage.
- 100 VA maximum consumption.
- Input (push button) voltage: 5 VDC. Output (solenoid) voltage: 24 VAC.
- Operating Temperature: 0 degree C to 85 degree C.
- RJ-11, 6 position, 4 pin connections for push buttons and solenoids.
- Can be installed up to 200 feet away from 24 VAC power supply.
- Includes mounting hardware.
- Four input/output field-programmable Control Module to control lavatories, water closets, showers or combination fixtures.
Sloan Ebv-144-A Isolated Solenoid Operator 3325462
- Made of premium-quality materials for durability
- Designed for pre-2003 Optima Plus Flushometers
- Comes with a wiring harness and protective cap
- Designed to ensure optimum functioning
If you are looking to find your Bradley repair parts quickly and easily, we have you covered. This Bradley 118-237 individual valve body is a genuine replacement part manufactured by Bradley. Order this Bradley 118-237 today and you will have your Bradley fixture up and running in no time.
- Genuine Bradley replacement part
- Diameter: 1.88 in., height: 1.00 in.
- Includes valve body
- Replacement part for Bradley sentry washfountain
- Replacement part for Bradley multi-founts
- C-certified lead free per NSF 372
The EL-154 Box-Mount Transformer is designed for use with the Sloan PWT Systems. This Box Mount Transformer Operates up to 10 water closet or urinal (any combination) Flushometers. Recommended for use on multi-combination units or more than three lavatory/shower solenoid valves.
- 120 VAC/24 VAC
- Plate mount
- Hard wired power supply
- 3 year limited warranty
- 24 VAC - 50/60 Hz operating voltage.
- Current: In Rush:12 VA; Holding: 4.63 VA
- Power consumption: 7 Watts.
- 160 degree F Maximum operating temperature.
- Brass body with integral "Y" strainer and stainless steel valve seat.
- .375 -18 NPTF thread at inlet and outlet.
- Includes 15' cord
- Used to supply hot or cold water to lavatories or pre-mixed water to showers. With integral filter. Use with any MICROPLUMB controller.
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Zurn's replacement sensor assembly (Part no. PEMS6000-26) is designed for ZEMS sensor water closet valves. ZEMS hardwired flush valves provide consistent and reliable motorized operation, detecting the user with precision for high-performance flushing operation. They feature a quiet GO BLUE diaphragm with a clog-resistant bypass and chloramine-resistant seals for an extended lifespan and lower maintenance costs. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- Fits ZEMS sensor water closet
- ZEMS flush valves are hardwired for reliable hands-free operation
- Robust solution for replacement or repair
- Ideal for commercial applications
- Plastic, Zinc Wall Sensor, Chrome/Black
- Easy to instal
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Zurn's replacement actuator assembly (Part no. PEMS6000-HYM-IS) is designed for ZEMS integral sensor flush valves. ZEMS hardwired flush valves provide consistent and reliable motorized operation, detecting the user with precision for high-performance flushing operation. They feature a quiet GO BLUE diaphragm with a clog-resistant bypass and chloramine-resistant seals for an extended lifespan and lower maintenance costs. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- Fits ZEMS integral sensor flush valve
- Includes flush actuator, wrench, O-ring, and escutcheon
- ZEMS flush valves are hardwired for reliable hands-free operation
- Robust solution for replacement or repair
- Ideal for commercial applications
- Easy to install
- MICROPLUMB Products are modular, flexible systems designed for new or retrofit applications.
- Primary applications in prisons, schools, government buildings and sports stadiums, applications in high traffic and vandal-prone areas.
- All PWT MICROPLUMB products and systems are designed and supported by Sloan Valve Company and can provide facilities with dramatic savings in key areas: Reduced Water Usage Lower Sewage Costless Energy Needed to Heat Water Reduced Maintenance
- 24 VAC - 50/60 Hz operating voltage.
- 100 VA maximum Consumption.
- Input (push button) voltage: 5 VDC. Output (solenoid) voltage: 24 VAC.
- Operating Temperature: 0 degree C to 85 degree C.
- RJ-11, 6 position, 4 pin connections for push buttons and solenoids.
- Serial port for PDA connection.
- Can be installed up to 200 feet away from 24 VAC power supply.
- Includes mounting hardware.
- Programmed Water Technologies, a Sloan Valve Company, offers a complete line of electronic, programmable plumbing valves and systems designed to give the user maximum control of their facility. Sexauer offers a complete line of components and parts to keep