Sump Pumps
The Zoeller M53 submersible pump is used for dewatering also known as sump or effluent. The pump has a 1-1/2 in. NPT discharge and passes solids measuring up to 1/2 in. This 0.3 HP pump was designed for residential/light commercial use. The pump has an integral float for easy installation.
- Float operated
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Solid buoyant polypropylene float
- Entire unit pressure tested after assembly
- Carbon and ceramic shaft seal
The Zoeller M63 is a 1/3 HP Premium Sump Pump. It comes with a lighted plug to insure that power is on at the receptacle. It has all cast iron construction. It has a 5 year warranty.
- 5 year warranty
- Viton seals
- Enhanced switch
- Heavy duty shaded pole motor
The M98 can be used for septic tank systems and to enhance flow step systems. This model can be used in residential or light commercial use for dewatering and transferring groundwater or effluent. The automatic pump is submersible with 1 ½ in NPT discharge.
- Corrosion-resistant, powder coated epoxy finish
- Durable cast iron construction
- Cast iron switch case, motor, pump housing and base
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000# tensile strength
Then Zoeller 508-0006 Aquanot Spin battery backup system comes with a high performance pump (30-gpm @ 10' tdh). It comes with a high-tech charger/Controller that self tests the system. Comes with a 3 years warranty.
- High Performance Pump (30-gpm @ 10'tdh)
- Unit self tests
- 3 Years warranty
- Low battery indicator
The Zoeller M95 Submersible Sump Pump is our Premium offering. It has a 1/2 HP PSC motor and a 1-1/2 in. discharge. It comes with a lighted plug to insure the unit has power at the receptacle. It has a flow capacity of 68 GPM at 10 in. TDH.
- Premium offering with 5 year warranty
- Lighted plug when AC power is present
- Energy efficient PSC motor
- Integral vertical float switch
The Zoeller 540-0005 Flex is a water powered backup system. It does not require battery or AC power and works off of home water pressure. You must have city water (no well) to operate the pump. Can be installed in the horizontal or vertical position.
- Water Powered. No batteries to maintain
- Can be installed vertically or horizontally
- Can be installed ion the rafters
- Must be used with a municipal water supply
- High capacity and high head
The Zoeller BN98 (98-0005) is a 1/2 HP Submersible sump/effluent pump. It is recommended for use where water gathers and gravity flow is not possible to remove it, such as basements and crawl spaces. It is also commonly used for septic tank dosing. It has a 1-1/2 in. discharge and flows at 4,320 GPH at 5 in. TDH.
- Piggy-back tethered float
- Cast iron construction for longevity and heat dissipation
- Energy efficient PSC motor design
- Passes 1/2 in. spherical solids
The Zoeller BN53 is a Cast iron submersible sump/effluent pump. It has a Non-clogging vortex impeller and has a 115-Volt oil-filled, motor. Tethered float switch. Passes 1/2 in. solids. 1-1/2 in. NPT discharge. Turn On: 7-1/4 in., Off: 3 in., Maximum lift: 19 in., Maximum flow: 2580 GPH, 1/3 HP.
- Cast iron construction
- Piggy-back tethered float switch
- Passes 1/2 in. solids
- Heavy duty shaded pole motor