Control Boxes, Batteries & Alarms
Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Requires 9-Volt battery (not included)
- 5 Year limited warranty
Pro Series Standby Sump Pump Batteries are the best batteries for your backup sump pump because they are designed around the system. They are uniquely constructed with heavy duty plates to store more energy, provide longer run times and last longer in standby operation. The Pro Series B12-100 will provide years of dependable service without the hassle of having to add battery fluid or distilled water. The Pro Series B12-100 battery is compatible with all current Pro Series Pumps' backup and combination sump pump systems. The high storage capacity of the B12-100 battery can run any of the current Pro Series battery backup or combination sump pump systems intermittently for days.
- Maintenance free - no need to add battery fluid or distilled water
- Runs the pump longer for more hours per charge, intermittently for days and lasts longer in standby operation
- Compatible with all new Pro Series Pumps backup and combination sump pump systems
- Up to 55 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 70 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1850 battery backup sump pump system
- Up to 110 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Internally threaded terminals for easy installation
- Compatible with PS-C33 Item # 110613; PHCC-2400 Item # 110610; PS-C22 Item # 110612; PHCC-1850 Item # 110609;
The Pro Series Pumps Deluxe Dual Float Controller (DFC2) is a premium product. It has a cage that protects the 2 micro reed switches. The second float acts as a fail-safe, providing redundancy. The dual float simply mounts to the discharge pipe, at the activation height of your choosing, with the included stainless steel hose clamp and is a piggy-back switch making it compatible with most sump pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user functionality, the DFC2 exercises the sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected, and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as, one of the Pro Series Pumps Connect modules, a home automation system, or other device for remote notification.
- 2 float switches for added protection and redundancy
- Primary float switch activates the pump when water reaches the float
- Secondary float acts as a fail-safe for the first
- Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the battery is low
- USB data port and remote terminal connect to external devices such as the PHCC Pro Series Pumps connect modules, home automation systems or other devices for remote notification
- Exercises the pump weekly to extend pump life
- Adjustable run time (after the float drops) from 5-45 seconds
- Adjustable to any activation height using included stainless steel hose clamp
- Float switch can be unplugged from controller for easy installation
- Optional high water accessory available (PS-WS)
- Warranty matches the Pro Series pump it is purchased with, otherwise a 1-year warranty applies
The Pro Series Dual Float Switch with Enhanced Controller is one in a line of many Pro Series float switches available for sump pump applications. The Pro Series Pumps lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The mid-level Pro Series Dual Float Switch with Enhanced Controller (DFC1.5) is designed for reliability and flexibility. It has not one, but two micro reed switches. The second float switch, which acts as a fail-safe to provide redundancy, is unique and the most dependable in the industry. It has a protective cage that prevents debris from interfering with the floats, a solid top to keep out sand or dirt, and a vented-curved bottom to prevent build-up under the float. The dual float switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The DFC1.5 is a piggy-back float switch making compatible with most sump pumps. For easy installation the float switch cord can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For enhanced user functionality, the DFC1.5 exercises your sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. If you want a sump pump float switch that is dependable and has the flexibility to deal with the unique circumstances in your pit, you have found it, The DFC1.5.
- Two float switches for added protection and redundancy, the secondary float switch acts as a failsafe
- Protective cage for increased reliability
- The primary float switch activates the pump when water reaches the float
- Enhanced controller exercises the sump pump weekly to extend pump life
- System operating light to display that the controller is operating properly
- Adjustable run time (after the float drops) from 5-45 seconds
- Adjustable to any activation height using included stainless steel hose clamp
- Float switch cord can be unplugged from controller for easy installation
- Piggyback plug
- Easy installation
- Compatible with S3050-NS (Item 134653), S3033-NS (Item 134652), S2033-NS (Item 3585548), ST1033-NS (Item 134651)
- Warranty matches the Pro Series Pump it is purchased with, otherwise a 1 year limited warranty applies
With no monthly or yearly fees, the Pro Series Pumps WiFi Module sends e-mail, text and status alerts to your phone, tablet or computer to alert you to potential problems or required maintenance. The Wifi Module easily connects to compatible Pro Series systems using the data port or dry contacts. Sends e-mail, text and status alerts to your phone, tablet or computer. No monthly or yearly fees or subscriptions
- Easily connect to compatible Pro Series systems using the data port or dry contacts.
- USB data port allows you to receive text or email alerts telling you exactly what is going on with your sump pump system using your home Wi-Fi signal or automation hub
- Remote notification terminal allows you to receive general alerts while away from home; the remote terminal allows for one of many external devices to be connected including a home security system, auto dialer or other dry contact based device
- Pro Series Pumps Wi-Fi module give you the flexibility not found with other brands
- Free Apple and Android App available
- No monthly fee
The Pro Series Pump Alternator and Alarm System is ideal for those wishing to maintain 2 pumps in the same pit. The alternator lengthens the life of both pumps by alternating usage, running 1 pump at a time. If a pump or float fails, the system will alert with a visual and audible alarm that high water is present and let you know which pump is failing. The system will then allow the other pump and the second float to keep everything dry. In addition, it has a remote terminal allowing for connection to external devices, such as, one of the Pro Series Pumps CONNECT modules, a home security system, home automation system, or other device for remote notification. Now you can be in the know when you are on the go.
- Can be used in sump, sewage and effluent applications
- If 1 pump fails the other pump will take over and an audible alarm will sound
- Alerts to pump failure, high water and system operation
- Remote terminal allows the unit to connect to any Pro Series Pumps connect module, security system, home automation system or other device
- Vertical switches can be unplugged from the alternator for easy installation
- Angled receptacles to accept a standard or right-angled pump plugs
- 9-Volt battery back-up for "high water alarm" alarm
- Designed to run on a standard 15 Amp, 120-Volt circuit
Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.
- Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
- For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
- Easily attaches to the discharge pipe with included mounting hardware
- 10 ft. cord with plug
The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Requires 9-Volt battery (not included)
- Maintenance free - no need to add battery fluid or distilled water
- Compatible with all new PHCC Pro Series backup products
- Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
- Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Runs pump intermittently for days
The Pro Series Pumps Standby batteries are the best batteries for your battery backup sump pump because they are designed around the system. They are uniquely constructed with heavy duty plates to store more energy, provide longer run times and last longer in standby operation. The Pro Series B-2200 Battery is the largest of the Pro Series Pumps wet cell batteries and is compatible with all Pro Series Pumps backup and combination sump pump systems. The high storage capacity of the B-2200 Battery can run any Pro Series battery backup or combination sump pump system intermittently for days. It is shipped dry and vacuumed sealed to retain freshness. Activating the battery is simply done by adding a 6 qt. battery fluid pack (sold separately Model # Z-PACK). Additionally, The Pro Series B-2200 Battery accommodates the exclusive Pro Series fluid sensor that will allow the battery backup controller to monitor the battery fluid level and alert the owner when maintenance is needed.
- Runs the battery backup sump pump system longer for more hours per charge, intermittently for days
- Up to 50-hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1850 battery backup sump pump system
- Up to 100-hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Last longer in standby operation
- Compatible with any Pro Series Pumps battery backup sump pump or combination system (PS-C33 Item 110613; PHCC-2400 Item 110610; PS-C22 Item 110612; PHCC-1850 Item 110609)
- Accommodates the exclusive Pro Series Pumps fluid sensor which alerts when distilled water is needed
- Shipped vacuumed sealed and without battery fluid to remain fresh until activated
- Can be easily and safely filled with a 6 qt. battery fluid pack (sold separately Model Z-PACK, Item 110619)
- 1-year limited warranty