Hydronic Parts
The PC3F in-line, wet rotor circulator with universal flange is designed for applications in closed-loop hydronic heating and cooling systems, as well as in solar systems. The pump is non-submersible and for use in dry, frost-free, well-ventilated installations. Twist-To-Fit Universal Flange, Rotates 90 to fit most installations with a single product.
- 3 pump sizes cover every application
- 3-speed versatility maximize efficiency and provide sufficient flow rates with a single pump
- Universal design replaces wide range of competitive models with just one brand
- Twist-to-fit universal flange, rotates 90 to fit most installations with a single product
1/2 in. Dia, facilitates easier starting, smoother bearing surface. Specially calibrated spring assembly has less vibration. Heavy duty casting, provides proper balance and equalization of torque. 81-5050 Replaces Armstrong 806026-002 and B & G 189110. 81-5280 Replaces B & G 118723. Min. Order: 1 EA.
- Cast iron
- Use on Armstrong S-45 & S-46
- Factory replacement
- Can be used on B & G circulators
- Equals B & G #118723
- Use on B & G# 2 1/2
- Use on B & G #3
- High quality
- Long lasting
- Quiet operation
Architectural design
- Push or pull in the direction the door swings
- Available for any Adams Rite Series 4500, 4900 or 4700 deadlatch (except 4750)
- Paddle dogging ( push" versions only). Turning hex key in escutcheon holds the paddle down, leaving the door free-swinging. Dogging key provided
- Cam Plug furnished for use with Series 4500 to 4700 latches (Not used MS+1890 lock/latch)
- Available in 4 modes: Push to left, push to right, pull to left and pull to right. Can be reconfigured to any mode in the field. Dogging not to be installed in pull configuration
- Finish: Duronotic
115V. 3 Piece Design Features Replaceable Parts. For Use On 3/4" Through 1-1/2" Pipes. Iron. Hp: 1/12. Rpm: 1750. Armstrong: S-25. Taco: 110.
Red Fox Single Speed. For Use On 3/4" Through 1-1/2" Pipes. System Lubricating. Polypropylene Impeller, Flange Gaskets Included. For Heating and Cooling Applications. Material: Iron. Hp: 1/25. Rpm: 2800. Armstrong: Astro-30.
3 Year Warranty
- System Lubricated
- Bronze Body Construction For Potable Water
Taco OnCommand Systems are manufactured using the highest quality U.S. made component parts available. Patented Integral Flow Checks (IFC) are built into each OnCommand pump to prevent cold water from entering the hot water line. Patented ACT OnCommand Electronics are the controls for each OnCommand System. This state-of-the-art electronics allows the system to accurately sense temperature and automatically shut off the system to maximize comfort and energy savings. OnCommand Systems are the only recirculation product that saves both energy and water approved by the US Department of Energy and State Energy Commissions. You can look forward to over 15 years of life expectancy with a Taco OnCommand System.
- Includes:
- "00" Cartridge circulating pump with built-in OnCommand Electronics, power cord, Integral Flow Check (IFC) and mounting bracket
- Starter button
- Set of two (2) 1/2" plumbing adapter tees
- Set of two (2) 1/2" stainless steel flex lines
- 115 volt
- 3,250 RPM
Taco OnCommand Systems are manufactured using the highest quality component parts available. Patented Integral Flow Checks (IFC) are built into each OnCommand pump to prevent cold water from entering the hot water line. Patented ACT OnCommand Electronics are the controls for each OnCommand System. This state-of-the-art electronics allows the system to accurately sense temperature and automatically shut off the system to maximize comfort and energy savings. OnCommand Systems are the only recirculation product that saves both energy and water approved by the Department of Energy and State Energy Commissions. You can look forward to over 15 years of life expectancy with a Taco OnCommand System.
- Includes:
- "00" Cartridge circulating pump with built-in OnCommand Electronics, power cord, Integral Flow Check (IFC) and mounting bracket
- Starter button
- Set of two (2) 1/2" plumbing adapter tees
- Set of two (2) 1/2" stainless steel flex lines
- 115 volt
- 3,250 RPM
- Recirculation Pump
- 0-2.2 GPM
- Head Range 0-6.2 Feet
- Connection; Threaded
The PC3F in-line, wet rotor circulator with universal flange is designed for applications in closed-loop hydronic heating and cooling systems, as well as in solar systems. The pump is non-submersible and for use in dry, frost-free, well-ventilated installations. Twist-To-Fit Universal Flange, Rotates 90 to fit most installations with a single product.
- 3 pump sizes cover every application
- 3-speed versatility maximize efficiency and provide sufficient flow rates with a single pump
- Universal design replaces wide range of competitive models with just one brand
- Twist-to-fit universal flange, rotates 90 to fit most installations with a single product
Maintenance Free Motor and Pump Assembly
- Permanently Lubricated, Dry Motor
- 3 Year Warranty
- Flanged Connections
- Flanges Sold Separately
Taco cartridge type pump for solar domestic hot water heating systems and domestic water circulaton. Standard flange mount with stainless steel volute. Medium head performance
115V. 3 Piece Design Features Replaceable Parts. For Use On 3/4" Through 1-1/2" Pipes. Bronze. Hp: 1/12. Rpm: 1750. Armstrong: S-25. Taco: 110B.
The 006 Plumb n' Plug Cartridge Circulators are designed to conserve water, increase comfort and reduce the delivery time of hot water to outlet fixtures by periodically re-circulating hot water through the system. An average residence can save up to 25 gallons of wasted water per day. Factory pre-wired 6 foot line cord with 7 day digital programmable clock timers allow for easy installation. Simply Plumb it in, then Plug it in. Plumb n' Plug circulators include all the standard 00 maintenance-free design features-no mechanical seal, self lubricating, replaceable cartridge, quiet, efficient operation and unmatched reliability.
- 7 Day Programmable Digital Timer Allows Up To 10 On/Off Settings
- Multiple Settings Allow For Different Weekday/Weekend Run Times
- UL Listed
- Standard High Capacity Output
- Compact Design
- Quiet, Efficient Operation
- Direct Drive-Low Power Consumption
- Unique Replaceable Cartridge Design-Field Serviceable
- No Mechanical Seal
- Unmatched Reliability-Maintenance Free
- Bronze Construction with Sweat Connections.
- Recirculation Pump
- 0-10 GPM
- Digital Timer, 7 Day Programmable
- Connection; Sweat
1725 Rpm, 115 Volt, 60Hz
- Flanged Connections
- Single speed
- For use on 3/4" through 1-1/2" pipes
- Polypropylene impeller
- 1/25 hp motor
- For heating and cooling applications
- Bronze body model for potable water
- Up to 80% more starting torque than competing circulators
- Replaces Armstrong #ASTRO 30B
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model is a multi-speed model with plug, 115V/1ph, and has 1/2" sweat connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model has an adjustable thermostat with plug, 115V/1ph, and has 1/2" NPT connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model is a multi-speed model with plug, 115V/1ph, and has 1/2" NPT connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model is a multi-speed model with plug, 115V/1ph, and has 1/2" sweat connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model is a multi-speed model without a plug, 115V/1ph, and has 1/2" NPT connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model is a multi-speed model without a plug, 115V/1ph, and has 1/2" NPT connection.
The Bell & Gossett e3 ecocirc circulating pumps are full featured pumps that consume as little power as a common night light. This lead free pump utilizes an electronically commuted/permanent magnet motor, which by design is more efficient than an induction motor. In addition to lower power consumption (less than 14 watts), the ECM technology allows for many built-in features to be incorporated that makes installation of the pump less labor intensive. This model has an adjustable thermostat without a plug, 115V/1ph, and has 1/2" sweat connection.
- 115 Vac
- Flange To Flange Dimension Is 6-1/2"