Leak Detection

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints

• It is easily injected into the system, traveling with the refrigerant, using less sealant than those sealants designed to mix and travel with the systems oil
• Will react with moisture or air that is naturally present at a leak, forming a secure seal
• Compatible with the refrigerant, oil and all system materials
• Designed for large systems up to 5 tons
• Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
• Eliminates expensive leak search and repair
• Travels with refrigerant to find leaks fast
• Utilizes a reusable hose

Pro-Flush is a flushing solvent for A/C and refrigeration systems formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. Compatible with all refrigerants and compressor oils, the kit makes servicing quick, easy, and safe, as well as assuring you get to the job site with all necessary hardware in hand for 1-stop servicing. Pro-Flush is the answer for technicians who need a professional quality flushing solvent as well as the components to match.

• Pro-Flush is compatible with CFC and HFC refrigerants and compressor oils
• Pro-Flush has a non-boiling flashpoint that heats no higher than 106ׄ°F (46°C) so most material boils off at atmospheric pressure and once the system is reconnected and sealed, the vacuum drawn on the system assures any remaining liquid is removed
• Pro-Flush is a safe, non-toxic, and residue free product and meets the EPA's Significant New Alternatives Program (SNAP) standards
• Pro-Flush is safe to transport without fear of hazardous material
• Pro-Flush injector includes a pressure relief valve that opens at 200 psi, preventing dangerous over pressurization of the injector
• Pro-Flush is suitable for use in ambient temperatures below 60°F, unlike prepackaged aerosol dispensers which cannot be used when the ambient temperature is less than 60°F

• Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems
• Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate
• Ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions
• It is non-toxic, non-flammable and is non-ozone depleting
• The industry standard for flushing refrigeration and air conditioning systems
• Ideal for system clean-up after burnouts
• Cleaning is fast, efficient and verifiable
• Flush line sets for R-410A conversions

Permanently seal gas leaks in A/C and refrigeration systems. For use in copper and aluminum coils. Polymer free: non-clogging to compressors, recovery units, schrader valves, cap tubes, TXV valves.

• Magic frost lubricants, fizes, and enhances
• Polymer free
• Safe for system
• OEM approved
• POP blister pack

Help locate and fix gas leaks in your drain assembly with Rectorseal Better Bubble 8 oz. Gas Leak Detector. This liquid plumbing aid forms large, long-lasting bubbles to pinpoint leaks and can be used safely with ammonia, oxygen, air and refrigerants. Better Bubble forms large, long-lasting bubbles that help you find sources of leaks, including small leaks.

• Use to detect gas leaks
• For safe use with most household gases including ammonia, oxygen, air and refrigerants
• Forms large, long-lasting bubbles that help you find sources of leaks, including small leaks
• Use safely with garbage disposals
• Contains up to 8 treatments
• Non-corrosive and is biodegradable

AC Leak Freeze is the leading air conditioning and refrigerant leak repair solution in the US today. All products are OEM Approved. AC Leak Freeze is ideal for preventative maintenance and leak protection.

• Permanently seal gas leaks in A/C
• For use in copper and aluminum coils
• Polymer free: non-clogging to compressors, recovery units, Schrader valves, cap tubes, TXV valves, micro channels, evacuation equipment
• Permanently seal gas leaks in A/C and refrigeration systems

Pro-Bubble is an easy-to-use, high-bubbling and viscoelastic blue leak detector. The new and improved formula enhances bubble production and detects leaks quickly. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Pro-bubble makes leak detection easy by creating a cluster of small bubbles at the leaking point
• Cohesive flow properties cause the product to flow to the leak
• Clinging formula pinpoints micro leaks
• The slow evaporation rate provides long inspection times for leak detection
• Pro-bubble is odorless, nontoxic, non-corrosive

Piercing valve and hose for use with A/C EasySeal (item #298768) and A/C EasyDry products. Tool helps in preventing and sealing refrigerant leaks. Pierces top of can and provides hose for easy installation.

• Piercing valve and hose
• Opens EasySeal can easily
• Controls pressure from can
• Included in 2+1 display pack

Better Bubble leak locator is formulated to pinpoint the smallest leak quickly and easily. Safe to use on most gases including ammonia, oxygen, air, and refrigerants. Its thick formula produces large, long lasting, well defined elastic bubbles that stand up under pressure and windy conditions. It may be used on surface temperatures from 20°F to 250°F, is non-corrosive and is biodegradable.

• Use on all types of pipe, tubing, valves, tanks, pressure vessels, condenser/evaporator coils, refrigeration coils, and many other similar applications
• Bio-degradable and environmentally friendly
• Does not contain any oils, halogens, ammonia, or amines
• Will not corrode metal surfaces or attack plastic or rubber
• Is not chemically reactive with refrigerant oils

Wet Switch Flood Detector is a solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. that now has a built-in test and reset button for easier installation. Turns system off when detecting moisture due to condensate or drain leaks. 1 or 2 drops will cause Wet Switch to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the Wet Switch is activated and has turned the unit off, reset simply by drying the absorbent pad with a paper towel and pressing the reset switch.

• Integral feet raise the hydrophilic pad and sensor array off the drain pan slightly to prevent nuisance tripping and pan corrosion (metal pans only) from interfering with the sensor array
• High tech polymeric fiber quickly draws water into the sensor array using proven capillary technology and detects even a minimal amount of water drawn into the hydrophilic pad
• Multiple unit connectivity allows for multiple wet switches to be connected in series to adequately cover large drain pan areas
• Power supply to the wet switch is 24VAC, the standard power available on most air handler units, making hookup quick and easy since there is no need to run different power to the switch
• Double throw relay allows for wiring to interrupt the system and to sound an alarm (by others) when moisture is detected
• When the wet switch activates, it locks out the call for cool circuit on the air conditioner until the switch is manually reset preventing continuing damage in cases where the overflow water drains out of the pan, onto the surrounding ceiling

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints Easily injected into the system, traveling with the refrigerant, using less sealant than those sealants designed to mix and travel with the systems oil A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal With A/C EasySeal, the contractor is able to just add a can to the system and move on to the next job In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons For systems 1.5 tons to fractional, use A/C EasySeal-SS For commercial systems with refrigerant charge of 125 lbs. - 250 lbs., use A/C EasySeal-XL Must be purchased in case quantity

• Permanently seals even larger leaks
• Rapid Fusion Technology for a stronger bond
• Easiest to install direct inject
• Works with all refrigerants

Pro-Flush is a flushing solvent for A/C and refrigeration systems formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. Compatible with all refrigerants and compressor oils, the kit makes servicing quick, easy, and safe, as well as assuring you get to the job site with all necessary hardware in hand for 1-stop servicing. Pro-Flush is the answer for technicians who need a professional quality flushing solvent as well as the components to match.

• Pro-Flush Kit includes 8 oz. container of Pro-Flush solvent, refillable ProFlush injector tool pressure tank, pressure relief valve for added safety, large rubber adapter that flushes up to 1-1/4 line sets, and service hose
• Pro-Flush has a non-boiling flashpoint that heats no higher than 106ׄ°F (46°C) so most material boils off at atmospheric pressure and once the system is reconnected and sealed, the vacuum drawn on the system assures any remaining liquid is removed
• Pro-Flush is a safe, non-toxic, and residue free product and meets the EPA's Significant New Alternatives Program (SNAP) standards
• Pro-Flush is safe to transport without fear of hazardous material
• Pro-Flush injector includes a pressure relief valve that opens at 200 psi, preventing dangerous over pressurization of the injector
• Pro-Flush is suitable for use in ambient temperatures below 60°F, unlike prepackaged aerosol dispensers which cannot be used when the ambient temperature is less than 60°F

Clean shot is a simple system flush that, when used correctly, will help ensure contaminants and debris commonly left in a system will be easily and safely removed. We also recommend using clean shot on equipment that has experienced a compressor burn-out to assist with removing unwanted acids and contaminants from the system. Please refer to the Chemours refrigerants website for additional technical information.

• Ozone safe
• Non-toxic
• Non-flammable
• Includes free handy shot flushing tool

• Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems
• Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate
• Ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions
• It is non-toxic, non-flammable and is non-ozone depleting
• The industry standard for flushing refrigeration and air conditioning systems
• Ideal for system clean-up after burnouts
• Cleaning is fast, efficient and verifiable
• Flush line sets for R-410A conversions

• Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems
• Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate
• Ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions
• It is non-toxic, non-flammable and is non-ozone depleting
• Must be purchased by the case, 4 per case
• The industry standard for flushing refrigeration and air conditioning systems
• Ideal for system clean-up after burnouts
• Cleaning is fast, efficient and verifiable
• Flush line sets for R-410A conversions

The ACDP-C A/C Condensate Leak Shutoff Control is a simple, reliable, device that provides years of trouble-free operation and water leak protection for HVAC systems while saving hours of leak damage maintenance time and cost. It has no floats or moving parts to corrode or hang up but utilizes our patented 30 in. flat flexible sensor that offers superior wide area coverage. When a water leak is detected the controller interrupts the Air Conditioner thermostat control signal and shuts off the A/C unit, stopping further condensation, property leak damage, and potential for mold. No batteries necessary as It is powered by the 24 VAC air conditioner control circuit. The easy to mount sensor can be mounted externally as a leak monitor or in the pan as a condensate pan level monitor. The housing can be stand alone or wall mounted. A red LED illuminates upon leak detection.

• No moving parts to corrode or jam up; the patented 30 in. x 1 in. flat flexible ribbon sensor provides superior wide area coverage and can be mounted as an external monitor or in the pan as a level sensor; it will activate with the smallest drop of water
• Controller has a 5-Amp 24 VAC N/C relay that opens the A/C thermostat control signal when leak detected by sensor, stopping further condensation and property damage; a red LED illuminates on the front of the housing when a leak is detected
• No batteries required as the device is powered from the 24 VAC air conditioner control circuit
• Easy controller installation with either wall or stand-alone mount

The ACDP-A A/C Condensate and Hot Water Heater Leak Alarm is a simple, reliable, device that provides years of trouble-free operation and protection for these dual systems while saving hours of water leak damage maintenance time and cost. It has no floats to corrode or hang up as it utilizes 2 of our patented 30 in. flat flexible ribbon sensors that offer superior wide area water leak coverage. One sensor mounts at the A/C unit and the second one mounts at the HWH drain. When it senses a water leak it sets of the 100 decibel alarm. This alerts local personnel so they can report, or fix, the leak. The leak alarm is powered by a 9 vdc battery (not included). The easy to mount sensors can be mounted externally as a leak monitor or in the drip pan as a level monitor. The housing can be stand alone or wall mounted. A 6 in. pigtail with connector is packaged with the unit so the second sensor can be easily spliced into the circuit using quick connectors or 22-Gauge wire nuts.

• No moving parts to corrode or jam up; the patented 30 in. x 1 in. flat flexible ribbon dual sensors provide superior wide area coverage and can be mounted as an external monitor or in the pan as a level sensor; it will activate with the smallest drop of water
• Reliable device is a mainstay for protecting the dual system, cooling coil over HWH, arrangements in many of today’s apartment complexes; 9 vdc battery powered it will activate continuously for approximately 50 hours; it can also be used as a single system
• Reliable inexpensive protection from condensate water leaks that cause costly water leak damage repairs and use up maintenance man hours that could be used elsewhere; helps protect against insurance premium increases, provides peace of mind and save hours of maintenance time and cost
• Easy to install and maintain. the alarm housing can be wall mounted or stand alone