Hydronic Equipment & Parts
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternatives that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Replaces 4 components, eliminates 3 leak paths, saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Exclusive adjustable flow path allows for draining from either side of the ball
- Creates cleaner-looking more efficient installations
- Reversible handle for added versatility
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
The Air Separator is a brass horizontal-mount accessory that traps and forces microbubbles out of the system. It reduces noise and improves system efficiency and operation. It features a removable vent head and stainless steel coalescing medium.
- Reduces noise, improves system efficiency and operation
- Reduces wear and tear on system components
- Allows flow to be directed into either side of the unit
- Pin guided float for smooth operation
- Corrosion-resistant stainless steel coalescing medium can be removed and cleaned if a blockage should occur
- Ideal for use with the Webstone expansion tank pro service valve
All of the features you trust from the original Isolator Uni-Flange ball valve, with two versatile enhancements. The 360 degree flange rotation allows for orientation to any degree necessary for your installation and a multi-function drain that permits draining from either side of the pump. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands, a hi-flow hose drain and stainless steel snap ring for extra stability during installation.
- Conical inlet to minimize turbulence
- Replaces 8 components, eliminates 7 leak paths, saves approximately one hour in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
- Stainless steel internal bent hot water outlet tube extracts 5-7% more hot water off the top of the tank dome
- Attractive silver finish cover that resists dents and corrosion
- High output finned cupronickel heat exchanger provides maximum efficiency 11 fins per inch
- 316L stainless steel tank for high temperatures and superior corrosion resistance
- Environmentally safe, CFC free water blown, 2" thick foam insulation allows less than 1/2 defree F heat loss per hour
- Immersion type stainless steel control well
- 1" boiler supply connection
- 1" boiler return connection
- Silver-finished cover resists dents and corrosion
- High-output finned cupronickel heat exchanger ensures maximum efficiency
- 316L stainless steel tank withstands high temperatures
- Foam insulation ensures less than 1/2 degree F heat loss per hour
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
- Stainless Steel Bands, Won'T Rust
- Plated Malleable Iron Lugs Insure Uniform Pressure
- High Content Neoprene Gasket Won'T Deteriorate, Gives Positive Seal
- Will Not Collapse Schedule 40 PVCPipe
- Sizes Fit IPS Pipe
- Stainless steel bands offer protection against rust
- Neoprene gasket provides a positive seal
- Malleable iron lugs ensure even pressure
- Works well with IPS pipe
1/8 in. IPS male thread connection. Use screwdriver or coin to operate. 5 years warranty against defect.
- Air vent
- Hot water
- Valve only
- Nickel plated
- Silver
- Specifications
- Safety
- 125 psi
- Fits 1/8 in. threads
- Meets ASME standards
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternatives that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Replaces 4 components, eliminates 3 leak paths, saves nearly 30 minutes in labor
- Eliminates Assembly Needed to Isolate and Drain Any Portion of a Piped System
- Avoids reduced port alternatives
- Exclusive Adjustable Flow Path Allow for Draining From Either Side of the Ball
- Creates cleaner-looking more efficient installations
- Reversible Handle for Added Versatility
Replacement cable for 650 series
- 5/8" x 100'
- Made from high-quality metal for enhanced durability
- Ideal replacement for 650 series cables
- 100 ft. long cable offers a better reach
- Designed to ensure efficient functioning
Beacon/Morris -- Heatrim. 3/4" Copper Tube with 50-52 Aluminum Fins Per Foot. Dent-Resistant Front Panel. Pivot-Mounted Damper. 7-3/8" H, Extends 2-11/16" From Wall. Length: 45 Inside Corner.
Replacement Motor for All Control Zone Valves. Easily replaced in-line. Used in low pressure steam control.
- Manual opener on all models
- May be installed without disassembling the valve
- Complete powerhead may be replaced without breaking plumbing line connections
- Complete powerhead may be replaced without draining the system
- Easy to install
- Suitable for heating applications
- Motor may be replaced without removing the valve body
- CSA certified
- UL listed
- 2 position actuator
The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.
- Reduces emissions in the environment by 50% during use
- Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
- Ignites even wet firewood
- Increases radiant heat in the room