Searched for "40140000"
The Honeywell Home Aquastat Relay is designed for use with an HVAC heating system. This immersion-type controller provides high limit protection while switching control of the oil burner and the circulator. Compatible with Honeywell Home models.
- Designed for use with an HVAC heating system
- 120 240 degree F range with 8 degree F fixed differential, low volt/millivolt
- Select models include transformer and accessory terminals for adding a remote low limit controller
- Requires a 24 VAC thermostat with heat anticipator set at 0.2A
High Capacity Thermostatic Radiator Valves with T104 Actuators provide control of temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating. Designed with the higher capacity normally required by North American heating systems.
- Controller with combined remote setpoint and sensor mounted on a wall. Setpoint/sensor connect with a capillary tube to an actuator, which mounts on the valve body. For V110 valves
- Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems
- Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
- All working parts are replaceable while valve remains in service, in-line, under pressure
- Controls include sensor, set point dial and valve actuator; components may be integral or connected by capillary tubes
- Require no electrical connections
- Meet ASHRAE standard 102-1989
- 40 mm collar diameter
- Temperature Range (F) 48 degree F to 79 degree F
- Capillary Length (ft)6 ft. 8 in.
Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 6".
White Rodgers -- horizontal mounting. 50 To 90F (10 to 32C) range, 24v. 2 Stage heating, 1 stage cooling. Heat anticipator first stage 0 to 1.0 Amp, second stage . 15 To 1.0 Amp. Mercury cell switch. Energizes reversing valve in heat or cool position. Beige. Min. Order: 1 EA
Immersion-type controller that combines high limit protection with switching relay control of burner and circulator motors. High limit opens burner circuit only. Case available for horizontal or vertical mounting.
- Requires a 24 VAC thermostat with heat anticipator set at 0.2A
- Tradeline models include well adapter, tube of heat conductive compound and range stops
- Include transformer and accessory terminals for adding a remote low limit controller
- Easy to install
Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.
- Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
- Visible control point scale and external adjustment screw permit easy setting
- Horizontal or vertical insertion of the sensing element
- Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
- Direct or well immersion Tradeline models include heat-conductive compound
- Temperature range maximum ambient-150 degree F
- Operating temperature range 100 degree F to 240 degree F
- Differential temperature (F) 5 degree F to 30 degree F adjusted
- SPDT switching action
- Stop factory-set at 240 degree F (116 degree C); heat-conductive compound
Danfoss -- Part# 013G8202, Operator with Valve Mounted Dial and Remote Sensor with 6' Capillary Tube For Ra2000 Units.
Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.
- Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
- Visible control point scale and external adjustment screw permit easy setting
- Horizontal or vertical insertion of the sensing element
- Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
- Direct or well immersion Tradeline models include heat-conductive compound
- Temperature range maximum ambient-150 degree F
- Operating temperature range (F)65 degree F to 200 degree F
- Differential temperature (F) 5 degree F to 30 degree F adjusted
- SPDT switching action
- Stop factory-set at 200 degree F (93 degree C)
Provide precise and accurate control of room temperature. Control temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort.
- Designed with the higher capacity normally required by North American heating systems
- Valve seat disc, which is made of resilient material (EPDM)
- Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
- All working parts are replaceable while valve remains in service, in-line, under pressure
- Valves normally open without control mounted
- Valves may be used with V110 valves
- Ensures tight shutoff on steam or hot water systems
- Meet ASHRAE standard 102-1989
- Includes sensor, set point dial and valve actuator
- Components may be integral or connected by capillary tubes
Aquastat
- 1/2"
- 70-85F
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Manual Reset
- 100-225F
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# S1-031-03027-000
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 007392F
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)