Searched for "40140000"
Exact Replacement Plastic Impeller for Broan 9910379H. Light-weight design reduces bearing wear and vibration. Celcon plastic construction.
- Broan exact replacement impellers
- Blade: 4-9/16 in. O.D.
- Hole: 0.218 in. I.D.
- Made in China
Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.
- Isolated end switch
- 24 VAC powered
- For Taco series 570 zone valves (570, 571, 572, and 573)
- Allows for service of valve without removing it
Armstrong factory Circulator Pump Oil. 1/2 Oz. Easy to use. Convenient size makes over oiling a non-issue.
- Factory replacement
- Easy to use tube
- For use on S & H circulators
- Can be used on B and G pumps
- meets factory specifications
- SAE 20
- Detergent free
- Lead free
- Equals B & G L23401
- Lubricates bearing assembly
Cast Iron Construction
- Couples Motor To Pump Inside Bearing Assembly Housing
- Fits B&G Series HV Pumps & Armstrong #H-32
Cast Iron Construction
- Couples Motor To Pump Inside Bearing Assembly Housing
- Fits B&G Series 100 Pumps & Armstrong #S-25
1/2 in. Dia, facilitates easier starting, smoother bearing surface. Specially calibrated spring assembly has less vibration. Heavy duty casting, provides proper balance and equalization of torque. 81-5050 Replaces Armstrong 806026-002 and B & G 189110. 81-5280 Replaces B & G 118723. Min. Order: 1 EA.
- Cast iron
- Use on Armstrong S-45 & S-46
- Factory replacement
- Can be used on B & G circulators
- Equals B & G #118723
- Use on B & G# 2 1/2
- Use on B & G #3
- High quality
- Long lasting
- Quiet operation
This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.
- Repair part
- Includes casing body bolts
- Easy to install
- 3-year warranty
This 3/4 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of chrome plated body, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
- SINGLE RETROFIT eliminates future coupling replacement
- EASY INSTALLATION reduces labor hours and down-time
- 4 MODEL VERSATILITY reduces coupler inventory up to 70%
- Operates silently & dependably even with severe shaft misalignment
REPLACEMENT ACTUATOR HEAD FOR ZONE VALVE
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Easily Isolates the Pump for Replacement
- Replaces 8 components, eliminates 7 leak paths, saves approximately one hour in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents Electrolysis and Eliminates Galvanic Corrosion
- Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
4- spring Coupler for S & H circulators. Cast iron construction for long service life. Easy cross reference to competing models.
- Cast iron construction
- Couples motor to pump inside bearing assembly housing
- Used on S-25,S-35.H32,H41
- Can used be placed on B & G circulator
- Equals B & G #118705
- Equals B & G #189110
- No balancing required
- No rusting due to construction
- Durable
- Genuine factory replacements
The Taco 1 in. cast iron Freedom Flange set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a heating system
- Compatible with a wide variety of Taco circulators
- 1 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1/2 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum safe operating pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
Designed to isolate circulator pump during repairs or replacement. Pressure rated at 600 WOG. Chrome plated brass ball with virgin PTFE seats. Bottom loaded, blowout proof stem. 1/2 turn operation. Flange mounting holes 4-5/8 in. centers.
- Fits most circulator pumps
- Includes mounting nuts and bolts
- Durable brass body and flange
- High pressure rating (600 WOG for solder and threaded and 250 WOG for press)
- Adjustable packing and gland
- EPDM O-rings to avoid leaks at installation
- Optional tee handle included
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum Safe Operating Pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The Taco 1-1/4 in. cast iron Freedom Flanges set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a hydronic heating system
- Compatible with a wide variety of Taco circulators
- 1-1/4 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.
- For use with Astro 220 and 225 SSU models
- 1-1/4 in. NPSM x 3/4 in. sweat
- Lead free
- Set contains 2 half unions and gaskets
- Easy to install
- For use with copper pipe
- Water tight connection
- High quality
- Genuine factory replacement
- Complies with California & Vermont lead free laws
Beacon/Morris -- Heatrim. 3/4" Copper Tube with 50-52 Aluminum Fins Per Foot. Dent-Resistant Front Panel. Pivot-Mounted Damper. 7-3/8" H, Extends 2-11/16" From Wall. Length: 45 Inside Corner.
lead free bronze flange. Heavy duty construction. universal designs allows it to used with competing pumps.
- Flange Lead Free Bronze - 1" NPT
- Hardware kit is not included (i.e. gasket, nuts and bolts)
- for use with potable water systems
- heavy duty