Hydronic Repair Parts
Fit-All Radiator Valve Handle fits all popular valve stems by choosing one of three different size metal inserts included and placing it into a molded square recess in the thermal plastic handle that serves as an insulator from the hot valve body and stem. There is a molded embossed direction arrow pointing clockwise with adjacent word in. CLOSE in. and another arrow pointing counter-clockwise with word in. OPEN in. embossed molded into surface of handle. Designed to work with a hot-water or steam valve.
- Molded, thermal plastic handle
- Designed to work with a hot-water or steam valve
- 3-step metal insert
- Fits all popular stems
Radiator Valve Spud Wrench is designed for making radiator valve repairs and can be used on 1/2 in. to 2 in. radiator valves. A radiator valve body is connected to the radiator by a spud in order to remove the radiator valve a spud wrench such as this is required to loosen the spud.
- Use to remove and install radiator valve spuds from radiator
- Cast metal
- Spud wrench for radiator valve repairs
- Insert in radiator nipple until proper size reached
Use this OEM Replacement-Gauge Vial to measure the remaining oil level in your HVAC fuel or cooling tank. With painted increments to assist in level identification, this vial offers a clear plastic construction with a rubber gasket. Use to measure the oil level.
- Clear plastic construction
- Black rubber gasket
- Use to measure the oil level
- Painted increments
The 1-1/4 in. Steam Radiator Angle Valve is designed for use with a steam radiator in a heating application. It is used to turn on/off steam to a radiator. It's made of brass construction.
- 1-1/4 in. IPS angle valve for a steam radiator
- Solid brass construction
- Designed for steam heating applications
- For use on 1-1/4 in. steam pipe
The 1-1/4 in. x 1/8 in. Tapped Black Cap is suitable for use with black or cast-iron pipe. This HVAC part is designed for use at the end of 1-1/4 in. main steam lines. Tapped 1/8 in. to accept air valves.
- For use at the end of 1-1/4 in. main steam lines
- For black or cast-iron pipe
- Tapped 1/8 in. to accept air valves
- Don't forget sealant when threading pipe (sealant not included)
The 1/8 in. IPS Male Angled Steam Radiator Vent Valve is designed for HVAC use. This valve has a single fixed vent and installs easily on most radiators.
- Designed for a heating application
- 1/8 in. IPS male, angled vent valve for a steam radiator
- Single fixed vent radiator
- Max operating pressure 5psi
Oil Tank Accessory Kit is for 275 Gal. Vertical oil tank replacement installations. Kit includes leak-proof 2 in. Vent Alarm/Gauge with easy to read break-resistant plastic vial suitable for outdoor conditions. Also includes 2 in. zinc speed-fill 45 degree connector, 2 in. zinc speed-fill cap and 2 in. zinc vent cap.
- Replacement oil tank kit for vertical oil tank installations
- Made of zinc casting
- Interchangeable with industry standard oil fill-pipe nozzle adapters
- Rust resistant
1 in. Circ Flange is designed to be used with your home's Taco circulator. This pump flange is made of cast iron for durability. The easy-on and easy-off design allows you to easily adjust the flange.
- Designed to be used with Taco circulators
- Pump flange
- Made of cast iron
- Easy-on and easy-off design
The 3/4 in. x 1/2 in. Straight Steam Radiator Vent Valve is designed for use with select US Air Valve models. This straight vent valve is made for use with a steam radiator in a heating application.
- Compatible with select US air valve models
- Straight vent valve for a steam radiator
- 3/4 in. male x 1/2 in. female connection
- HVAC part for a heating applicatio
The OEM 2 in. Heavy-Duty Lock-In Fill Cap features a rust-resistant, galvanized finish. This fill cap has a vented design which helps keep out debris and water. This cap is designed to be used with your home's OEM HVAC system and parts.
- Designed to be used with OEM HVAC systems and parts
- Rust-resistant galvanized finish
- Vented design helps keep out debris and water
- Durable, lock-in design
- Female 2 in. npt
The OEM 2 in. x 1-1/4 in. King Fill Alarm whistles while the tank is being filled and stops when the tank has reached a safe-capacity level. This alarm has is made of cast-iron with features a powder-coated finish to prevent rusting and staining.
- For use with OEM HVAC systems and parts
- Designed to fit underground tanks
- Made of durable cast iron with corrosion-resistant finish
- Powder-coated helps prevent rust and stains
- Designed to whistle while tank is being filled and stops when tank reaches a safe capacity level
- 2 in. male npt x 1-1/4 in. female npt
The Automatic Hot Water Air Valve is designed for hot water heating applications. It vents air automatically from any hot water heating system.Designed for hot water heating applications.
- Automatically vents air from any hot water system
- 1/8 in. IPS male thread for easy installation
- Designed for hot water heating applications
- 1/8 in. male threaded connection
The # 5 1/8 in. IPS Angled Steam Radiator Vent Valve is designed for a heating system. This angled steam radiator vent valve is primarily used in warmer rooms closer to the boiler.
- # 5 1/8 in. IPS angled vent valve for a steam radiator
- 1/8 mail thread connection
- Fixed vent size .070
- Designed for use with a steam heating system
Brass, nickle-plated. For hot water radiators, convectors, and baseboards. The Key for PE957 Hot-Water Air Valves features a chrome-plated, brass construction for strength and durability. This key is used to open and close PE957 hot-water air valves.
- Chrome-plated brass construction
- Used to open and close PE957 hot-water air valves
- 7/32 in. square opening
- HVAC tool
When you need to replace a vent cap in your home's HVAC system consider using the OEM 1-1/4 in. Threaded Mushroom Vent Cap. This cap is made of rust-resistant zinc and features a mesh screen which helps prevent debris from entering the cap.
- Designed to be used with OEM HVAC parts and systems
- Made of rust-resistant zinc
- 30 mesh screen helps prevent debris from entering
- Threaded
- Male 1-1/4 in. npt
GRANBY Tank uses a sophisticated 5-step process to provide the finest paint finish in the industry. After quality assurance testing, each tank is pre-treated with an iron phosphate cleaning process then run through a drier to ensure a tight bond between the paint and steel. The tank then passes through a powder coating process where a beautiful, yet tough, weather resistant coating is applied.
- Be sure to have the tank(s) installed by a licensed installer; domestic heating oil tanks are to be installed in accordance with NFPA-31, installation code for oil burning equipment
- Overlap weld
- Meets UL/ULC specifications
# 40M 1/8 in. IPS Angled Steam Radiator Vent Valve is made for a steam heating system. Float-type vent 1/8 in. NPT angle connection Single non-adjustable port Maximum operating pressure 6 psi for ordinary one-pipe system that doesn't require proportional venting Steam Air Vent.
- Installs easily on most steam radiators
- Designed for a heating system
- Single fixed vent
- #40M 1/8 in. IPS angled vent valve for a steam radiator
Use when large amount of air must be vented such as on radiators with particularly long branches and on very large radiators. 1/8 in. IPS Angled Steam Radiator Vent Valve is designed for use with most steam heating systems and installs easily for your convenience.
- Vent value for heating applications
- Designed for use with most steam heating systems
- 1/8 in. male thread connection
- Fixed vent size .040
The 1 in. Steam Radiator Angle Valve is designed for use with a steam radiator in a heating application. It is used to turn on/off steam to a radiator. It's made of brass construction.
- 1 in. IPS angle valve for a steam radiator
- Designed for steam heating applications
- For use on 1 ft. steam radiator pipe
- Solid brass construction
The # C 1/8 in. IPS Angled Steam Radiator Vent Valve is designed. For use in a heating application. It installs easily on most steam radiators.
- Installs easily on most steam radiators
- Designed for a heating system
- # C 1/8 in. IPS angled vent valve for a steam radiator
- Fixed vent size .1285
NeatHeat baseboard front cover is made of polymer and the end caps, splice plates and inside corners are ABS plastic. They are melt proof until approximately 460 degree F. You can save yourself up to $75 per hour in labor plus the cost of material by installing NeatHeat instead of having a plumber install new baseboard throughout your home. You can install NeatHeat throughout the entire property in less time and without specials tools as it snaps on over the existing baseboard heater. NeatHeat will never rust or need replacing. It doesn't have any sharp edges and helps protect against children's and grandchildren's fingers touching the sharp fins inside. Check the in. How to Measure for NeatHeat in. guide below to make sure your individual baseboard heaters are the correct size for NeatHeat. Common brands include Slant Fin series #15, #30, and #2000, Sterling series petite 7, Suntech and Weil McLain; however, there are also many lesser known brand names so it is always best to check your specific measurements.
- Cover existing baseboard
- End caps sold separately
- Made of polymer that is melt-proof until approximately 460 degree F
- Can be cleaned using common household cleaners
- Not intended for use with electric baseboard heat
GRANBY Tank uses a sophisticated 5-step process to provide the finest paint finish in the industry. After quality assurance testing, each tank is pre-treated with an iron phosphate cleaning process then run through a drier to ensure a tight bond between the paint and steel. The tank then passes through a powder coating process where a beautiful, yet tough, weather resistant coating is applied.
- Overlap weld
- Meets UL/ULC specification
- Be sure to have the tank(s) installed by a licensed installer; domestic heating oil tanks are to be installed in accordance with NFPA-31, installation code for oil burning equipment
The 3-in-1 Radiator Valve repairs broken air valves, re-taps radiator and rethreads air valves. Repair Tool is made of chrome-plated steel for strength and durability.Plumbers Edge 3-in-1 radiator valve repair tool is a multi-purpose repair tool.Our premium product is made of chrome-plated steel for strength and durability.
- Chrome-plated steel construction
- Extracts, re-tapes and re-threads broken valves in radiators
- Black steel
- 3/4 in. W x 3 in. L x 2-3/4 in. H
OEM 14833P Horizontal Oil Tank Accessory Kit for 275 Gal. Oil Tank. Replacement oil tank kit for Horizontal oil tank Installations, Made of rust resistant zinc casting, Interchangeable with industry standard oil fill-pipe nozzle adapters, Rust resistant. Includes Leak-Proof 2 in. Vent Alarm/Gauge, 2 in. Zinc Speed-Fill 45 degree Connector, 2 in. Zinc Speed-Fill Cap and 2 in. Zinc Vent Cap.
- Made of rust resistant zinc casting
- Interchangeable with industry standard oil fill-pipe
- Includes vent alarm/gauge, speed-fill 45 degree connector, speed-fill cap and vent cap
- Used on horizontal oil tank