Heating Equipment Accessories
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.
- Hard-wired 750-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Quiet fan and fast-heating coil element quickly warm a space up to 100 sq. ft.
- 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
- Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
- An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- A wall or built-in thermostat is required for control
- Can be installed in ceiling
- UL listed in the US and Canada for safety compliance
- 2-year limited warranty
Freshen the appearance of your Cadet Register heater with this convenient horizontal replacement grille. Perfect for quickly updating an old, discolored or damaged heater grille, this handy kit includes matching screws. Simply installs with a screwdriver.
- Compatible with Cadet Register (RM) Series electric heaters
- Horizontal grille 14" wide x 7-3/8" high x 1" deep
- Includes white grille and two white painted screws for a seamless look
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (5-pack kits available)
- 1-year limited warranty
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
The Com-Pak series wall can for Cadet C, CS, CB and CM series heaters recesses easily into a 4 in. deep inside or outside wall for convenience. Packaged separately from the heater, a new installation requires this wall can. Cadet's Com-Pak Plus, Com-Pak Max and Com-Pak Bath series heaters are packaged separately with many available wattage, voltage and color options.
- Easy installation
- Fits exclusively with any Cadet Com-Pak Plus, Com-Pak Max or Com-Pak Bath series heater
- Recessed, clean finish
- For use exclusively with Cadet brand C, CS, CM or CB series heaters
- Galvanized steel has superior resistance to mechanical damage during handling, storage, and transport.
- Single pack unit
Cadet logo hole plug. Used to fill hole left by thermostat when using wall mount thermostat. Easy to install.
- Use with C/CS/CT/CM series heaters
- Not for use in FX or LX series units
- White
- Easy to install
Replacement reflector hangers for the Heatstar ERXL and ER2STG tube systems. Chrome plated. 1 per 10 ft. of reflector.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 1 pair of hangers
- 1 pair per 10 ft. of reflector
- Chrome plated
Hanging chain kit for the Heatstar ERXL and ER2STG tube systems. 1 kit per 10 ft. of reflector. These are also included in the full ERXL and ER2STG install kits.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 2 3 ft. chains and 4 S-hooks
- Tube is aluminized steel
- See instructions for clearances
Williams Thin-Wall Collar Kit for use when wall thicknesses is between and 5 in. Designed to fit with all Williams Direct-Vent models. Used to increase thickness with wood strips are undesirable.
- Installs with vent kit on direct-vent models 1403622, 1403621, 2203622, 2203621, 3003622 and 3003621
- Constructed of durable metal
- To be used with Williams furnace vent cap assemblies only
- Original factory part
Williams Terminal Block Thermocouple is designed to provide high output for impressive performance, making it great for use with your wall furnace. For your convenience, the terminal block thermocouple includes a vent limit switch and a built-in junction box and it can fit many types of Williams furnaces. Perfect for use with your wall furnace.
- Equipped with a built-in junction box to which wires from the vent limit switch are connected
- Vent limit switch sold separately
- 24 in. L
- Fits Williams model numbers 3508731, 3508732, 4007731, 4007732, 5008731, 5008732, 6257731, 6257732, 6508731, and 6508732
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Ideal for larger rooms where faster heat is desired. Designed to fit a variety of Hearth heaters.
- Fits model size 3501522, 5001522, 6501522, 3502522, 5002522 and 6502522
- Includes an automatic and manual fan switch along with a power supply cord
- 120-Volt
- 150 CFM
- Not for use on the 20,000 BTU/hour heaters
Converts a Williams Forsaire Counterflow furnace to be hardwired, permanent electrical connection. Great for replacement installations that were previously hardwired. Electric cord included.
- Fits model numbers 3508331, 3508332, 3508731, 3508732, 4007331, 4007332, 4007731, 4007732, 5008731, 5008732, 5507331, 5507332, 5508331, 5508332, 6008531, 6008532, 6257731, 6257732, 6508731 and 6508732
- Great for replacement installation
- Easily installs in place of the power cord
- Used for wiring from a junction box rather than using the power service cord
Williams dual header is designed to fit Monterey Dual-Wall Top-Vent furnace. This is a hardware assembly for the Monterey 50K BTU wall furnace. Also works with the Monterey Plus.
- Replace the part instead of the furnace
- Durable metal
- Comes fully assembled
- Easy to install
3-easy functions: On/Off - Thermostat Setting in digital. Operates with Williams Monterey, Direct-Vent Gravity and Hearth Console models. Black in color with velvet-touch casing.
- Easy-to-read LCD screen
- Displays room temperature in Fahrenheit or Celsius
- Battery operated
- 4-button control
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 150,000 BTU or 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
The high-altitude kit for the Williams 3003822 direct vent wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
Low voltage, 24-Volt, thermostat to adjust and maintain the temperature for a variety of heaters. Has a Fahrenheit and Celsius range. Slide control with off position.
- For use with high intensity infrared overhead heaters, low intensity radiant tube heaters, and forced air unit heaters
- 50-90 degree temperature range
- Also has Celsius scale
- Limited 1 year warranty
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Floorboard provides a barrier between the heater and your home's floor. Use when your William's heater is placed on carpeting or vinyl-type flooring for best protection. Insulated metal floor board is painted to match your Williams' room console heater.
- Powder-coated black finish
- For use with Williams room console heater models 5001521, 5001522, 5001921, 5001922, 5002521, 5002522, 5002921, 5002922, 6501521, 6501522, 6501921, 6501922, 6502521, 6502522, 6502921 and 6502922
- For use when your Williams heater is placed on carpeting or vinyl-type flooring
- Insulated
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
For use with the DEWALT DXH330 Electric Forced Air Heater. 14-3 Gauge wire. 25 ft. long. No Plug.
- For use with the DEWALT DXH330 electric forced air heater
- 14-3 Gauge wire
- 25 ft. long
- No plug