Flat Washers
Flat washers are essential fasteners to keep on hand. They are used with a bolt or screw to evenly spread the load over a wider area. Flat washers also prevent loosening due to vibration, stop the bolt or screw from pulling through, and can act as spacers. Available in a variety of sizes and finishes.
- Reinforces the connection of bolts and screws
- Made from zinc plated steel for durability
- Use with a 1/4 inch bolt or screw
- Includes 100 flat washers to complete your project
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in packs of 100
- USS pattern
A thin, flat, circular steel part with a centrally located hole. Similar to a USS washer, but with slightly smaller inside and outside diameters. Most SAE washers are made from thinner material.
- Zinc plated
- Material: steel
- Sold in packs of 100
- SAE pattern
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in packs of 100
- USS pattern
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in packs of 100
- USS pattern
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in 100-packs
- USS pattern
A thin, flat, circular steel part with a centrally located hole. Similar to a USS washer, but with slightly smaller inside and outside diameters. Most SAE washers are made from thinner material.
- Zinc plated
- Material: steel
- Sold in packs of 100
- SAE pattern
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in packs of 100
- USS pattern
Contains Assorted Flat and Lock Washers In Sizes # 4 To 1/2".
Flat washers are great for adding resistance to your bolts and screws to prevent them from boring into the wood and weakening it. These Deck Plus SAE fine threaded washers are finished with a black epoxy coating and are designed to fit nuts and bolts of a similar size and finish. This black finish is designed to match the latest trends in black-finished hardware. When selecting a washer, be sure to pick 1 that matches the fasteners you are already using. Picking a different finish may cause a chemical reaction, weakening your fasteners over time.
- Washers are used to increase the pressure that a bolt or screw provides
- Black epoxy coating is 2X more corrosion resistant than galvanized fasteners
- Use a washer that is the same finish as your other fasteners
- Intended for use in wood deck and fence construction
- For use with a 5/16 in. W bolt or screw
- Item sold individually at retail
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes. USS Flat Washers are sold in 5 lbs. and piece count boxes.
- Zinc plated
- Material: steel
- Sold in packs of 50
- USS pattern
A formed circular washer designed for use with 82 countersunk flat or oval head screws. They provide additional bearing area on the material being fastened and protect the underlying material. Improves the appearance of the countersunk screw and are used to give a finished appearance.
- Nickel plated
- Material: steel
- Sold in packs of 100
- For use with 82 flat or oval head styles
A thin, flat, circular steel part with a centrally located hole. Similar to a USS washer, but with slightly smaller inside and outside diameters. Most SAE washers are made from thinner material.
- Zinc plated
- Material: steel
- Sold in packs of 500
- SAE pattern
Flat washers provide spacing and an increased bearing surface. USS Flat washers offer a looser screw fit and larger outside diameter (OD) than same sized SAE washers. Use through hardened washers with Grade 5 and Grade 8 hex head cap screws and any bolts with different head configurations.
- Material: hardened steel
- Through hardened to 38-45 HRC
- Yellow zinc plated
- 1/2 in. bolt size
- 100 per pack
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes.
- Zinc plated
- Material: steel
- Sold in packs of 250
- USS pattern
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes.
- Zinc plated
- Material: steel
- Sold in packs of 250
- USS pattern
Flat washers are essential fasteners to keep on hand. They are used with a bolt or screw to evenly spread the load over a wider area. Flat washers also prevent loosening due to vibration, stop the bolt or screw from pulling through, and can act as spacers. Available in a variety of sizes and finishes.
- Reinforces the connection of bolts and screws
- Made from zinc plated steel for durability
- Use with a 3/8 inch bolt or screw
- Includes 100 flat washers to complete your project
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes.
- Zinc plated
- Material: steel
- Sold in packs of 500
- USS pattern
Flat washers provide spacing and an increased bearing surface. USS Flat washers offer a looser screw fit and larger outside diameter (OD) than same sized SAE washers. Use through hardened washers with Grade 5 and Grade 8 hex head cap screws and any bolts with different head configurations.
- Material: hardened steel
- Through hardened to 38-45 HRC
- Yellow zinc plated
- 3/8 in. bolt size
- 100 per pack
Flat washers provide spacing and an increased bearing surface. USS Flat washers offer a looser screw fit and larger outside diameter (OD) than same sized SAE washers. Use through hardened washers with Grade 5 and Grade 8 hex head cap screws and any bolts with different head configurations.
- Material: hardened steel
- Through hardened to 38-45 HRC
- Yellow zinc plated
- 1/4 in. bolt size
- 100 per pack
Flat washers provide spacing and an increased bearing surface. USS Flat washers offer a looser screw fit and larger outside diameter (OD) than same sized SAE washers. Use through hardened washers with Grade 5 and Grade 8 hex head cap screws and any bolts with different head configurations.
- Material: hardened steel
- Through hardened to 38-45 HRC
- Yellow zinc plated
- 3/4 in. bolt size
- 50 per pack
A thin, flat, circular steel part with a centrally located hole. Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Flat washers are used to improve stress distribution, and to span large clearance holes.
- Zinc plated
- Material: steel
- Sold in packs of 500
- USS pattern
Flat washers are essential fasteners to keep on hand. They are used with a bolt or screw to evenly spread the load over a wider area. Flat washers also prevent loosening due to vibration, stop the bolt or screw from pulling through, and can act as spacers. Available in a variety of sizes and finishes.
- Reinforces the connection of bolts and screws
- Made from galvanized steel for great corrosion resistance
- Use with a 3/8 inch bolt or screw
- Includes 100 flat washers to complete your project
A thin, flat, circular steel part with a centrally located hole. Similar to a USS washer, but with slightly smaller inside and outside diameters. Most SAE washers are made from thinner material.
- Zinc plated
- Material: steel
- Sold in packs of 500
- SAE pattern