Threaded Rods
The Superstrut 3/8 in. Threaded Electrical Support Rod is used to suspend metal framing channel from ceilings. The construction of this support rod holds up to 1,900 lbs. This rod is 6 ft. long and colored black.
- Steel
- Black finish
- 3/8 in. x 6 ft.
- 6 ft.
The Superstrut 3/8 in. Galvanized Threaded Electrical Support Rod is used to suspend metal framing channel from ceilings. The construction of this support rod holds up to 1,900 lbs. This rod is 16-Gauge and 10 ft. L. The standard Gold Galvanized finish is made up of a multi-step electro galvanizing and zinc dichromate process. The trivalent Chromium finish is applied over the zinc, producing a chemically bonded non-porous barrier for protection from moisture and air.
- Use to suspend super strut metal framing channel from ceilings
- 1,900 lbs. load capacity
- 16-Gauge
- 10 ft. L
- 10 ft. L x 3/8 in. Dia
The 1/4 in. Channel Spring Nut (5-Pack) provides durable resistance to pull outs and slide slips due to excessive pressure on electric channels. Alternate teeth are spaced to develop a wedging action that increases with pressure or load. The nut may be used with all A- and C-series channels and inserts.
- Provides durable resistance to pull outs and slide slips due to excessive pressure on electric channels
- Silver-electroplated finish
- May be used with all A and C-series channels and inserts
- 12-Gauge
The self-aligning 3/8 in. Channel Spring Nuts (5-Pack) are designed to provide resistance to pull-out and side slip in excess of the full strength of the channels with which they are used. These nuts offer a silver electroplated finish and are designed for use with A and C series channels and inserts. Alternate teeth are spaced and designed to develop a wedging action that increases with pressure or load.
- Provides resistance to pull-out and side slip
- Silver electroplated finish
- Designed for use with all A and C series channels and inserts
- Alternate teeth are spaced and designed to develop a wedging action that increases with pressure or load
Connecting modular framing channels and attaching accessories using standard spring and channel nuts can be frustrating. Spring lengths must be matched to strut depth, springs can slip through and get trapped in slots and parts bind together during transit and storage, channel nuts are effective, but they require constant attention during installation, decreasing efficiency. Universal Cone Nuts from erase compatibility issues, sliding easily into their optimal location in each channel. These easy-to-identify, distinctively colored cone nuts are available in every common thread size and are equally effective on any strut depth, including the 1-1/2 in. Kindorf and 1-5/8 in. Superstrut channels. Unlike channel and spring nuts, Universal Cone Nuts will not twist or bind together prior to installation. With the ideal combination of ease of use, exact positioning and compatibility, Universal Cone Nuts are time saving solutions to your metal framing needs.
- For use with A, C, E and H series channel
- Pliable nylon cone secures the nut in place through the entire range of construction site temperatures
- Eliminates the inventory and installation hassles of conventional spring nuts
- For use as strut a fitting
- Easy storage and distribution of parts at the jobsite
Threaded Electrical Support Rod suspends metal framing channel from the ceiling. With a pre-galvanized steel finish, the 12-Gauge rod is threaded for strength and durability and supports loads up to 900 lbs. Rod can be cut to length for a variety of applications.
- Suspends a Superstrut metal framing channel from the ceiling
- Pre-galvanized steel finish
- Compatible with Superstrut metal framing channels
- Install from a ceiling to support loads up to 900 lb.
- UL listed
The 1/2 in. Channel Spring Nuts (5-Pack) are self-aligning nuts that provide resistance to pull out and side slip beyond the normal strength of the channels. The spring nuts feature alternate teeth, spaced and designed for a wedging action, that increase with pressure or load to reduce side slip. They fit all 1-1/2 in. and 1-5/8 in. channel strut.
- Use to provide resistance to pull-out and side-slip
- Self-aligning and locks firmly into place for easy installation
- Steel SilverGalv material provides years of corrosion resistance
- Constructed of wedge-action, alternating, spaced teeth that increase wedge action based on pressure or load
- Fits all 1-1/2 and 1-5/8 channel strut
This sheet metal can be altered in shape and cut with proper equipment. Commonly used for gutter repair, duct work, patching, and flashing. Available in various sizes and materials.
- 1-piece
- Steel construction
- Zinc-plated
- 24 in. x 36 in.
- 26-Gauge
These flat bars are generally used as support braces, ladder hangers and gate latches. Common types of bars include the following: flat, punched hole and slotted hole. Applications for punched flats include bracing, duct work, overhead doors and heaters. Available in various sizes and materials. Popular materials are aluminum, zinc and plain steel. Flat bar can be cut to desired length.
- 1-piece per pack
- Aluminum construction
- Aluminum finish
- 1 in. x 1/8 in. x 96 in.
Coupling nuts are internally threaded nuts in extended lengths. Used with threaded rod, the coupling nut joins 2-pieces of threaded rod together from opposing ends for hanging various items either vertically or horizontally. Available in various diameters.
- 1-1/4 in. hex
- 25 per pack
- Material: steel
- Zinc plated
Coupling nuts are internally threaded nuts in extended lengths. Used with threaded rod, the coupling nut joins 2-pieces of threaded rod together from opposing ends for hanging various items either vertically or horizontally. Available in various diameters.
- 1 in. hex
- 25 per pack
- Material: steel
- Zinc plated
These threaded rods are metal rods with continuous threading and no head or fashioned tip. Commonly used as anchor bolts, clamps, hangers and U-bolts. They are available in a variety of diameters, lengths and finishes. Also sometimes called studs or threaded studs, threaded rod can be cut to desired length using any metal saw.
- 1-piece per pack
- Steel construction
- Zinc-plated
- 5/8 in. x 36 in.
Coupling nuts are internally threaded nuts in extended lengths. Used with threaded rod, the coupling nut joins 2-pieces of threaded rod together from opposing ends for hanging various items either vertically or horizontally. Available in various diameters.
- 1-1/4 in. hex
- 15 per pack
- Material: steel
- Zinc plated