Door Hardware
This is a top track pivot bracket designed for use on bi-fold doors that receives 1/4 in. diameter pivots. These wil fit most 1 in. wide tracks. Typically these are used by Acme 2900 series doors, as well as Stanley, Cox, and a variety of other bi-fold door systems. To adjust this track bracket you can use a Phillips head screwdriver, or an adjustable wrench.
- Top track pivot bracket for bi-folding doors
- Fits acme 2900 series doors
- Fits 7/8 in. W track systems
- Adjustable design
Poly foam weatherseal fills very narrow gaps. Recommended for interior use only. Fits one average window or door.
- Maximum compression
- A highly compressible self-stick tape designed for interior use
- The polyurethane foam squeezes down to fill even very narrow gaps
- Open cell weatherseal
Spring loaded top pivot has 1/4 in. Dia pin. Plastic base is 3/8 in. Dia. Many wardrobe door manufacturers use this pivot
- Spring loaded
- Pivot pin is 1/4 in. Dia
- Nylon pivot base is 3/8 in. Dia
- Used by many wardrobe door manufacturers
Plain Bearing. Button Tip. Size: 3-1/2", Corner: 5/8" Radius, Finish: Oil Rubbed Bronze.
Spring loaded top pivot has 1/4 in. Dia pin. 3/8 in. Dia plastic base. Used by many wardrobe door manufacturers.
- Spring loaded design
- 1/4 in. Dia pivot pin
- 3/8 in. Dia nylon pivot base
- Used by many wardrobe door manufacturers
These Prime Line Products are wardrobe door roller assemblies. They are 3/4 in. plastic single convex wheel with ball bearing. These are top hung, back panel and side mounting. The 1/2 in. offset adjustable bracket fits 3/4 in. to 1 3/8 in. T doors.
- Nylon roller
- Adjustable offset steel bracket
- Top hung side mount design
- For 3/4 in. to 1 3/8 in. T doors
- Convex wheel
- 1/2 in. offset
The 3 spring door stop with fixed screw and plastic tip. Length from base to tip is 2-7/8. Dia of base is 3/4. Sold in multiples of 10.
- Nickel finish
- Bottom is zinc
- Quick installation
- Easy installation
Deadbolt strike plate. Satin chrome finish. 2-1/4 in. x 1 in.
- Standard strike
- For use with deadbolts
- 2.25 in. H
- 1 in. W
- Round corners
- Uses 2 screws
- Lifetime mechanical and finish warranty
1-1/4 in. 5 pin tumbler lock features a chrome face, a hardened break-away tailpiece and 2 keys. Keyway is compatible to Weiser, Kwikset and Weslock. Used to keylock most surface mount handle sets.
- 5 pin tumbler lock with (2) keys
- Keyway is compatible to weiser kwikset and weslock used to key lock most surface mount handle sets
- 1-7/8 in. flat tailpiece with multiple break away points for various door thickness
- Solid brass cylinder and plug
Protects interior walls from impact damage by shielding contact point of wall and door knob. Repairs damaged walls. Paintable and self adhering.
- Door stop and wall protector
- Ideal for covering damaged walls
- Natural off white color
- Paintable
- Easy application
- Self adhesive
Wardrobe door roller assembly. They are 3/4 in. plastic ball bearing convex single wheel. They are top hung, front panel, and side mounting. They have a 3/8 in. offset adjustable bracket, with round edge plastic ball bearing wheel. These will fit 3/4 in. to 1 3/8 in. thick doors.
- Nylon roller
- Adjustable offset steel bracket
- Top hung side mount design
- Fits 3/4 in. to 1-3/8 in. T bypass doors
- Ball bearing wheel
- Convex wheel
- 1 piece per package
Doors not included. 801667 - 36" track for 2 panels in 2', 2'6", 3' openings. 801668 - 48" track for 4 panels in 4' openings. 801669 - 60" track for 4 panels in 5' openings.
These Prime Line Product as are Handle Sets. They are 3-15/16 in. Extruded Aluminum. These black handle sets are reversible, surface mount for left or right-handed mortise-locking doors. Extruded aluminum inside pull has wood grain feature strip and a black die cast outside pull designed to be used with any of the following latching units; E-2008, E-2009, E-2014, E-2079 and E-2111. Fits: 1 in. (2.5 cm) to 1-1/2 in. (3.8 cm) thick doors.
- Standard handle set for mortise locks
- Black outside pull and inside pull with activator lever for mortise latch
- Works with most mortise lock systems
- Non-handed
- Surface mounted
- 3-15/16 in. hole centers
This Closet Door Bi-Fold Pin Cap is an accessory of 808796. The 9/16 in. L full the Closet Door Bi-Fold Pin Cap. The color is white. Sold in multiples 1.
- Top diameter is 0.4375 in.
- Bottom diameter is 0.75 in.
- Quick installation
- Easy installation
5/8 in. O.D. door holder tips. Constructed from black rubber. They replace worn out tips on drop down door holders.
- Screw-in design
- Black rubber construction
- Saw tooth foot base
- Replaces worn out tips on drop down door holders
- Mounting hardware included
- Phillips head screwdriver required for installation
- 5/8 in. O.D. 1 in. overall O.D.
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- User friendly
- Easy to install
- Wide angle
- Plain view
Bi-fold door guide wheels. They are 7/8 in. nylon. They have a top mount spring loaded with a 7/8 in. Dia nylon wheel. These are top mount, self adjusting and fit 1 in. to 1 3/8 in. thick bi-fold doors up to 30 lbs. each.
- Nylon wheel
- Top mount spring loaded design
- Self adjusting
- Fits 1 in. to 1-3/8 in. thick bi-fold doors
- 30 lbs. carrying capacity
- Steel base
- 1-piece per package
The spring door stop is made up of four parts: plastic cap, spring, base and screw. It is a wall door stop and a heavy duty flexible. The 3 in. length full the spring door stop and polished Nickel finish. Sold in multiples 10.
- Length from base to tip 3 in.
- Dimeter of base is 3/4 in.
- Installation is quick
- Installation is easy
Deluxe door knocker with viewer. Features a satin nickel finish. Offers a 180 degree view.
- Die-cast knocker, solid brass viewer
- 160 degree viewing
- Fits 9/16 in. Dia bore
- Satin nickel finish
- Drill and 9/16 in. drill bit required for installation
- Large blade slotted head screw driver required for installation
- 1-piece per package
The Bi-Fold Door Bottom Pivot is made up of 2 parts: screw and plastic sleeve. Plastic sleeve is white. The 1-3/8 in. L of screw. Sold in multiples 1.
- Dimeter of plastic sleeve is 7/16 in.
- Finish: zinc
- Quick installation
- Easy installation
Bottom Pivot.
- The finish is zinc.
- Sold in multiples 1.
- The installation is quick.
- The installation is easy.
Sliding screen door roller assembly. They are 1 in. steel ball bearing concave wheels. They feature an aluminum frame with plastic inner housing.
- Aluminum frame with nylon inner housing
- Center groove steel ball bearing wheel 1 in. O.D.
- Used as top and bottom roller on Columbia doors
- Adjustable tension
- Phillips head screwdriver required for adjusting
- 1/4 in. roller width
- 1 piece per package
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Stainless Steel Screws Included. Description: Push, Size: 3-1/2" X 15", Finish: Solid Aluminum.