Strikes & Filler Plates

• For use with the AD7130540 and AD7131540 electric strikes
• Flat face with radius corners
• Finish: 313 Duronotic

Fail Safe / Fail Secure

• Strike opening: 5/8" x 1-7/16" x 1/2" deep
• Standard strike lip extension for 1-3/4" door
• Function: Remote electrical control of any narrow stile or hollow metal door equipped with an Adams Rite Series 4700 (or 4500), 4900 deadlatch or latchbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb (or opposing door) sections as shallow as 1-21/32"
• Finish: US28 (628) Satin Aluminum
• For use with Adams Rite Latches
• Adams Rite electric accessories can be used with all 7100 series electric strikes

• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Professional installation recommended
• 16 SEER Split System Heat Pump
• High-efficiency scroll compressor
• SmartShift technology to ensure quiet reliable defrost
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Copper tube/enhanced aluminum fin coil
• Fully charged for 15' of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
• Goodman brand sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Service ports and controls are accessible while unit is operating
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
• Cooling Capacity (BTU/h): 36000
• SEER/EER: 16/13
• Min. Circuit Amps: 19.1
• Max Fuse Size: 30
• Voltage: 197/253
• Liquid Line Size (IN): 3/8
• Suction Line Size (IN): 7/8
• Dimensions (WxDxH)

Fail Safe / Fail Secure

• Strike opening: 5/8" x 1-7/16" x 1/2" deep
• Standard strike lip extension for 1-3/4" door
• Voltage: 24VAC U.L. Listed for Burglary resistance
• Function: Remote electrical control of any narrow stile or hollow metal door equipped with an Adams Rite Series 4700 or 4500 deadlatch. Electrical actuation unlocks, 4900 strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-21/32"
• Finish: US28 (628) Satin Aluminum * For use with Adams Rite Latches
• Adams Rite electric accessories can be used with all 7100 series electric strikes
• For aluminum jamb installtion

Strike opening: 5/8" X 1-7/16" X 1/2" deep

• Bolt retainer jaw is stainless steel
• Strike accepts bolt of any Adams Rite 4500/4700/4900 Series deadlatch or cylindrical latches
• Basic 7400 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge where door thickness or jamb shape differs from this standard relationship
• Case: approximately 1" X 3-3/8" X 1-1/16" deep. Made of zinc aluminum alloy
• Faceplate: Measures 1-1/4" X 6-7/8", 7400 has flat faceplate
• Remote electrical control of any door equipped with an Adams Rite 4500/4700/4900 deadlatch
• Large faceplate is designed to cover strike opening when converting from MS pivoted-bolt deadlock to a deadlatch
• Electrical actuation unlocks strike jaw, releasing latch bolt so door can be opened without operating latch itself
• Extremely compact mechanism fits into as shallow as 1-1/16"
• Non-handed, ultra compact, stainless steel split-jaw
• Over 2400 lbs. of holding force
• Equipped with quick connect plug-in type connector
• AC/DC, 12, 16 or 24 volts
• Grade 1
• Field selectable at time of installation
• Opens electrically under 35 lbs. of preload
• Replaces for burglary resistance (ULF 1034)
• Finish: Clear anodized

Adams Rite Ultraline 7440 Series Electric Release

• Clear Anodized
• Measures 1-1/4" x 4-7/8"
• Faceplate is flat with square corners

Semi-mortised strike for rim exit devices having 3/4" Pullman-type bolts without auxillary bolts

• Strike opening 5/8" adjustable x 1-7/16" x 9/16" deep
• Strike accepts Pullman bolt of exit devices without deadlocking bolts
• Mounting Plate/Housing: measures 1-3/4" x 9" 1/16" deep
• Bolt retainer jaw is stainless steel
• Case: approximately 1" x 3-3/8" x 1-1/16" deep
• Made of zinc-aluminum alloy
• Provides electrical remote control, allowing door to open without activation of the exit device
• Non-handed, ultra compact, stainless steel split-jaw
• Over 2400 lbs. of holding force
• Equipped with quick connect plug-in type connector
• AC/DC, 12, 16 or 24 Volts
• Grade 1
• Standard finish in Ritecoat Epoxy to match Clear Anodized
• Field selectable at time of installation
• Opens electrically under 35 lbs. of preload
• Replaces for burglary resistance (ULF 1034)

Grade-1 ANSI/BHMA Type E8231, steel construction.The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock, operates on 12, 16 or 24 volt DC power, and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadbolts or 4500/4900 Deadlatches. Supplied with flat and radius faceplates. 1-1/8" backset, Dark Bronze finish.

Strike opening: 5/8" X 1-7/16" X 1/2" deep

• Bolt retainer jaw is stainless steel
• Basic 7400 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge where door thickness or jamb shape differs from this standard relationship
• Case: approximately 1" X 3-3/8" X 1-1/16" deep. Made of zinc aluminum alloy
• Faceplate: measures 1-1/4" X 4-7/8", 7400 has flat faceplate with square corners
• Remote electrical control of any door equipped with "key-In-lever/cylindrical" sets with a 1/2" to 5/8" projection
• Electrical actuation unlocks strike jaw, releasing latch bolt so door can be opened without operating latch itself
• Extremely compact mechanism fits into jamb sections as shallow as 1-1/16"
• Non-handed, ultra compact, stainless steel split-jaw
• Over 2400 lbs. of holding force
• Equipped with quick connect plug-in type connector
• AC/DC 12, 16 or 24 Volts
• Grade 1
• Field selectable at time of installation
• Opens electrically under 35 lbs. of preload
• Replaces for burglary resistance (ULF 1034)
• Finish: Satin stainless - 630

Strike opening: 5/8" X 1-7/16" X 1/2" deep

• Bolt retainer jaw is stainless steel
• Strike accepts bolt of any Adams Rite 4500/4700/4900 Series deadlatch or cylindrical latches
• Basic 7400 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge where door thickness or jamb shape differs from this standard relationship
• Case: approximately 1" X 3-3/8" X 1-1/16" deep. Made of zinc aluminum alloy
• Faceplate: measures 1-1/4" X 4-7/8", 7400 has flat faceplate
• Remote electrical control of any door equipped with an Adams Rite 4500/4700/4900 Deadlatch or "key-in-lever/cylindrical" sets
• Electrical actuation unlocks strike jaw, releasing latch bolt so door can be opened without operating latch itself
• Extremely compact mechanism fits into aluminum jamb (for opposing door) sections as shallow as 1 -1/16"
• Non-handed, ultra compact, stainless steel split-jaw
• Over 2400 lbs. of holding force
• Equipped with quick connect plug-in type connector
• AC/DC, 12, 16 or 24 volts
• Grade 1
• Field selectable at time of installation
• Opens electrically under 35 lbs. of preload
• Replaces for burglary resistance (ULF1034)
• Finish: Clear Anodized - 628

Field convertible from one mode to the other; however, AC intermittent solenoid must be used continuously in either

• Fail Safe-No power, unlocked
• Fail Secure-No power, locked
• For KIK latchsets or A/R latches
• Case: 1" x 3-3/8" x 1-5/8" deep
• Faceplate: Flat 1-1/4" x 4-7/8"
• Strike opening: 5/8" x 1-7/16" x 1/2" deep
• Standard strike lip extension for 1-3/4" door
• Finish: US28 (628) Satin Aluminum
• Strike accepts bolt of these latchsets: Arrow M and H series, Best 8K series , Corbin 83 & 76 series, Falcon X series, Kwikset 400 & 500 series, Russwin 400, 300, 4000 series, Sargent 2, 3, 6, 7, 8, 9 line, Schlage A-F & H series , U.S. Lock 2010, 2030 & 2050 series , Weiser E & X series, Yale 5000 series
• Applicable only with 1/16" or more gap between door & jamb

Fail Safe / Fail Secure

• Strike opening: 5/8" x 1-7/16" x 1/2" deep
• Voltage: 24VAC U.L. Listed for Burglary resistance
• Function: Replaces earlier 002, 7510, 7810 electric releases in either metal or wood jambs for remote electrical control of any door equipped with a cylindrical or Adams Rite Series 4700 or 4500, 4900 deadlatch. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-21/32"
• Finish: US28 (628) Satin Aluminum
• For use with Adams Rite Latches
• Adams Rite electric accessories can be used with all 7100 series electric strikes
• For aluminum or wood jamb installation

Grade-1 ANSI/BHMA Type E8231, steel construction.The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock, operates on 12, 16 or 24 volt DC power, and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadbolts or 4500/4900 Deadlatches. Supplied with flat and radius faceplates. 31/32" backset, anodized aluminum finish.

Grade-1 ANSI/BHMA Type E8231, steel construction.The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock, operates on 12, 16 or 24 volt DC power, and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadbolts or 4500/4900 Deadlatches. Supplied with flat and radius faceplates. 1-1/8" backset, anodized aluminum finish.