Searched for "49241700"
Rust-Oleum 1 gal. 9100 System Part A Marlin Blue is a versatile 2-part epoxy coating that quickly creates a tough, durable, protective surface. It can be used in heavy-duty interior or exterior industrial and commercial settings with direct to metal or concrete applications. When used with Part B Immersion Activator it provides long-lasting protection for fountains, swimming pools, slides and spas.
- Must combine 9100 Part A Base Marlin Blue with 9100 Part B Immersion Activator Item # 314200276 (sold separately) for use in swimming pools, slides, fountains and spas
- Covers approximately 350 sq. ft. when mixed 1:1 with part B Immersion Activator gallon
- Dry to touch in 6-8 hours, recoat after 16 hours
- Allow 7 days cure after application of the second coat before water immersion
- Stain and chemical resistant, durable lasts up to 8-years between recoats
- Flat finish provides a non-reflective, non-glare appearance
- Spray, roll or brush on
- Do not use over chlorinated rubber, synthetic rubber, vinyl or acrylic substrates
- Clean up with 160 thinner or xylene
The Rust-Oleum High Performance 9100 System Part B Immersion Activator is a versatile 2-part epoxy coating that quickly creates a tough, durable, protective surface. In just one coat 9100 System is equal to multiple coats of competitive epoxy. This coating is ideal for interior or exterior steel.
- Must combine 9100 Part B Immersion Activator with 9100 Part A Base item# 314200277(White) OR item# 313268169 (Marlin Blue) (sold separately) for use in swimming pools, slides, fountains and spas
- Covers approximately 350 sq. ft. when mixed 1:1 with part B Immersion Activator gallon
- Dry to touch in 6-8 hours, recoat after 16 hours
- Allow 7 days cure after application of the second coat before water immersion
- For fresh or salt water immersion of steel or concrete where water temps do not exceed 125 degree F (52 degree C)
- Stain and chemical resistant, durable lasts up to 8-years between recoats
- Flat finish provides a non-reflective, non-glare appearance
- Spray, roll or brush on
- Do not use over chlorinated rubber, synthetic rubber, vinyl or acrylic substrates
- Clean up with 160 thinner or xylene
Rust-Oleum 1 gal. 9100 System Part A White is a versatile 2-part epoxy coating that quickly creates a tough, durable, protective surface. It can be used in heavy-duty interior or exterior industrial and commercial settings with direct to metal or concrete applications. When used with Part B Immersion Activator it provides long-lasting protection for fountains, swimming pools, slides and spas.
- Must combine 9100 Part A Base White with 9100 Part B Immersion Activator Item # 314200276 (sold separately) for use in swimming pools, slides, fountains and spas
- Covers approximately 350 sq. ft. when mixed 1:1 with part B Immersion Activator gallon
- Dry to touch in 6-8 hours, recoat after 16 hours
- Allow 7 days cure after application of the second coat before water immersion
- Stain and chemical resistant, durable lasts up to 8-years between recoats
- Flat finish provides a non-reflective, non-glare appearance
- Spray, roll or brush on
- Do not use over chlorinated rubber, synthetic rubber, vinyl or acrylic substrates
- Clean up with 160 thinner or xylene
RAMUC -- Gallon. Apply over most previously painted pool surfaces & in damp environments. Excellent solution when short down-time is critical. Self priming, two-coat system. Adheres best on a cool, damp (not wet), & extremely clean surface. Not for fiberglass/gelcoat pools and spas. Dawn Blue. Min. Order: 1 EA
LEAD STOP Lead Encapsulating Compound is a thick elastomeric coating containing Bitrex anti-ingestant that is made to be a long lasting barrier over lead-based paint. When applied according to directions, LEAD STOP provides a protective barrier coat that seals and locks in lead that is contained in old lead-based paints on previously painted surfaces. LEAD STOP has earned a seal of approval for lead abatement from D.L. Litter Laboratories and the Commonwealth of Massachusetts Encapsulation Product Performance Protocol, Department of Public Health (Reg. #DL-10019) and meets the requirements of the US Department of Housing and Urban Development (H.U.D.), which offers a 20-year manufacturers warranty.
- Provides a protective barrier coat that seals and locks in lead
- Long lasting, interior and exterior formulation
- 20 Year H.U.D. warranty
- Earned seal of approval from D.L. Litter Laboratories
- Water-based
- Contains Bitrex anti-ingestant
- Earned a seal of approval for lead abatement from D.L. Litter Laboratories and the Commonwealth of Massachusetts Encapsulation Product Performance Protocol, Department of Public Health (Reg. #DL-10019)
For underwater or dry patching of tears and holes in vinyl liner swimming pools and other vinyl products. With 72 sq. in. of vinyl patching material, simple cut to size and bond the patch to the original vinyl. Included in the kit is a 1.5 oz. Tube of fast-drying, high-strength adhesive and a dauber applicator. The easy-to-follow instructions and tips help you quickly repair your favorite pool toy or vinyl liner pool quickly and securely.
- Use for underwater repairing (no need to drain your pool) on vinyl liner pools and for dry patching of other vinyl products like inflatable toys
- Kit comes complete with 1.5 oz. Adhesive tube, vinyl patch material, application dauber and complete instructions and tips
- Vinyl patch material measures 12 in. x 6 in. And can be cut to size to accommodate most tears and holes
- The adhesive is fast drying in 12 hours and provides a durable bond
- Kit includes: 1.5 oz. of adhesive, 1 applicator and clear patch material - cut to size needed