Gas Products
CounterStrike is a patented CSST innovation that is engineered to significantly decrease the potential for lightning induced damage to fuel gas piping systems. The black jacket has energy dissipating properties that will help protect the TracPipe CounterStrike stainless steel pressure liner as well as other fuel gas system components if the CounterStrike becomes energized due to lightning. There are no additional bonding requirements for CounterStrike imposed by the manufacturers installation instructions. With CounterStrike improved properties, TracPipe CounterStrike is to be bonded in accordance with current requirements of the National Electrical Code (NFPA 70) and the National Fuel Gas Code (NFPA 54). TracPipe CounterStrike is listed by CSA to ANSI LC 1. TracPipe CounterStrike meets building code requirements (ASTM E84) with respect to flame spread and smoke density. This permits installation in drop ceilings used as return air plenums and is UL Listed for 1,2 and 4-hour through penetration firestop systems without removal of the jacket.
- Counterstrike
- TracPipe
- Fitting
- Flange
- Pipe and tubing product type: CSST
- Material: brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
Flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P, and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gasses using forged nuts. Recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared. Not recommended for use with polybutylene or soft plastic tubing.
- Temperature range: -65F to 250F
- 45 flare
- Easy to use
- Not for underground use
- Compatible tubing: copper, brass, aluminum, welded steel hydraulic
- Resist vibration and mechanical pull-out
Can be reused which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 2000 psi
- 2-year warranty against defect
- Flare
- Forged brass
- Union
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
For use on fuel, oil, LP and natural gas lines and systems. Connects with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures 212 degree F
- Pressure up to 340 psi
- 1-year warranty against defect
- Flare
- Forged brass
- Cap
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Chicago Fittings X-Riser Seal and Ferrule Assembly It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Brass compression fitting ensures safety and peace of mind for years to come. It is not recommended for use with steel tubing. Compression fitting is easy to use for both contractors and the do-it-yourself.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Nut
Make plumbing applications easier with this Brass Pipe Nipple. This fitting is durably constructed from lead-free, rust-resistant brass to prevent corrosion. Both ends have male threads to connect to female fittings or pipes.
- 10-pieces per package
- Do not overtighten
- Not for use with steel tubing
- California residents see prop 65 warnings
- Not for underground use
- Ideal for gasoline, grease, oil, water, vacuum and air lines
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Lead free
- Brass
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Wide selection
For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures up to 250 degree F
- Pressure up to 1200 psi
- 1-year warranty against defect
- Forged brass
- Flare x MIP
- Elbow
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 180 degree F
- Pressure up to 250 psi
- Do not over-tighten
- 2-year warranty against defect
- Leaded
- Brass
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 125 psi
- Do not over-tighten
- 1-year warranty against defect
- Lead free
- Brass
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x FIP
- Forged brass
- Adapter
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x FIP
- Forged brass
- Adapter
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x MIP
- Forged brass
- Adapter
For use on fuel, oil, LP and natural gas lines and systems. Connects with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures 212 degree F
- Pressure up to 640 psi
- 1-year warranty against defect
- Flare
- Forged brass
- Cap
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures up to 250 degree F
- Pressure up to 1200 psi
- 1-year warranty against defect
- Forged brass
- Flare x MIP
- Elbow
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 125 psi
- Do not over-tighten
- 1-year warranty against defect
- Leaded
- Brass