Searched for "40141616"
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 1852 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Installed on LP gas motor fuel lines for lift truck systems
- Provides a quick closing coupling in the fuel line
- Couplings have an internal check valve that opens by attaching the two units
- 3/8" FNPT Inlet
- 1-1/4"M Acme
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Straight
- Installed on LP gas motor fuel lines for forklift systems up to 100 lb. gas capacity
- One-piece hot forged brass construction
- Internal guiding to prevent being jammed
- Tamper-proof stem
- DOT container type
- 3/4" MNPT container connection
- 375 PSIG discharge setting
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 111 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- For 420 lb. vertical tank or 300 liter horizontal tanks
- Double O-ring stem seal
- 3/4" Inlet x POL outlet
- Sturdy brass handwheel
- Static seat disc does not rotate, improves service life
- Incorporates fixed liquid level gauge
- Can only be used as an accessory valve on containers that have an independent pressure relief valve capable of handling that container's capacity
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Leak resistant design
- Double O-ring stem seal
- Tamper proof design
- Sturdy forged brass handle
- Static seat disc
- Recessed excess flow valve
- Normal application forklifts
- 3/4" MNPT cylinder x 3/8" MNPT outlet
- 2.6 gpm excess flow closing
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Permits ASME tanks to be evacuated when it is necessary to relocate a tank
- Not designed as a full time liquid outlet
- Activated by inserting a Schedule 80 pipe nipple, with suitable shutoff valve, into valve outlet
- 3/4" MNPT container connection, 3/4" FNPT outlet
- 8 GPM UL closing flow
- 1-15/16" wrenching hex
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Used for 100-200 lb. DOT or ASME tanks
- Includes service valve, back check filler valve, fixed liquid level gauge
- New high discharge flow capacity pressure relief valve
- Reduced filler valve chamber decreases the waste of LPG during filling
- Increased high filling capacity
- Tank connection: 3/4" MPT
- Vapor service connection: POL (CGA 10)
- Filler connection: 1-3/4" ACME
- 10.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 2795 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- For use with tanks up to 1000 gallons
- Solid brass valve designed for use in a single opening ASME container with a 2-1/2" MNPT riser
- Includes: double back check filler valve, vapor equalizing valve with excess flow, pressure relief valve with protective cap, service valve, plugged 1/4" FNPT gauge boss, captive fixed liquid level gauge with 36" dip tube and junior size float gauge flange opening
- Internal threads accommodate 2-1/2" MNPT riser pipe connection and 3/4" FNPT connection for filler valve opening
- Separate opening is required for a liquid withdrawal valve
- Float gauge not included
- POL (CGA510) Vapor Service Connection
- 1-3/4" ACME Filler Connection
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 30 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 30 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4.7"
- For vapor service on ASME domestic tanks with separate filler, relief and liquid withdrawal valve
- Incorporates a service valve, vapor return valve, fixed liquid level gauge
- Two seals, a back seat and an O-ring
- Easy seal replacement
- Less dip tube breakage
- Convenient level gauge
- 3/4" MNPT tank connection, female POL vapor service connection, 1-1/4" M. ACME vapor line connection
- 1/4" FNPT gauge boss
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 4312 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Indicates the maximum filling level
- 1/4" MNPT container connection
- 5.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 13 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Used for 100-200 lb. DOT or ASME tanks
- Includes service valve, back check filler valve, fixed liquid level gauge
- New high discharge flow capacity pressure relief valve
- Reduced filler valve chamber decreases the waste of LPG during filling
- Increased high filling capacity
- Tank connection: 3/4" MPT
- Vapor service connection: POL (CGA 10)
- Filler connection: 1-3/4" ACME
- 11.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
This non-handed bi-fold door is made from 24-gauge steel. It includes a half-louvered style, a baked enamel exterior, and complete track and hardware.
Sizes
The finished opening size for this bifold door is 42" x 80". However, its actual size is 41-1/2" x 78-1/2".
- Made of 24-gauge steel for durability
- Features a stylish half-louvered style design
- Baked enamel exterior creates a neat appearance
- Comes with complete track and hardware for easy installation
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 20 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4"
- 90 Degree Safety Filler Valve with AUTO & MANUAL Shutoff Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Installed on LP gas motor fuel lines for lift truck systems
- Provides a quick closing coupling in the fuel line
- Couplings have an internal check valve that opens by attaching the two units
- 1-1/4" F. ACME Inlet
- 1/4" FNPT Outlet
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- 1" NPT PRV Internal DOT
- 375PSI
- With cap
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- 100 LB DOT Service Valve, 3/4" NGT, 10.6" Dip Tube
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES