Electrical
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Type NM-B (nonmetallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the National Electrical Code 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
- NM-B has 2-conductors, 3-conductors and 4-conductors and available with 2-neutrals, construction designed for easier pulling
- Copper conductors are annealed (soft) copper, UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
Type NM-B (non-metallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
- Copper conductors are annealed (soft) copper and UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Run in air voids of masonry block and tile walls
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
- 12-Gauge
- NM-B has 2, 3 and 4-conductors and available with 2 neutrals, construction designed for easier pulling
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
The Southwire 3/4 in. x 6 ft. Liquidtite Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Reliably power-up electric tools and equipment outdoors with our 50 ft. 16/3 SJTW Orange Extension Cord. This cord features a light-duty, weather resistant, jacket that is rated for outdoor use. Its bright orange color makes it easy to spot.
- Outdoor medium duty extension cord, ideal for landscaping, and powering appliances such as a shop vac, weed Wacker, bush trimmer, leaf blower and electric lawn mower
- Highly visible bright orange jacket provides extra safety as well as prevents loss and theft on jobsites
- Extra durable oversized, molded plug prevent accidental bending or breaking and UL Listed for your safety
- Waterproof flexible vinyl jacket provides protection of the cord against moisture, abrasion, and sunlight
- 13 Amp, 125-Volt, 1625-Watt
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
This 6 ft. 50 Amp 3-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Gray in color
- UL certified
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
- Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
- Power, lighting, control and signal circuits
- Fished or embedded in plaster
- Concealed or exposed installations
- Environmental air-handling spaces per NEC 300.22 (C)
- Places of assembly per NEC 518.4 and theaters per NEC 520
- Installation in cable tray and approved raceways
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) and 645.5(D)(2)
- Conductors are cabled together and wrapped with a binder tape bearing the print legend
- Aluminum interlocking armor jackets
This 4 ft. 50 Amp 3-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Gray in color
- UL certified
Wire residential indoor branch circuits for outlets, switches and other loads with Southwire Romex SIMpull Type NM-B Cable. SlikQuik jacket allows for 50% reduction in pulling force for easier installation. NM has a heat capacity of 90 degree C and a usage rating of up to 600-Volt.
- Placed where space is available and free of excess moisture and dampness
- May be used for both exposed and concealed work in normally dry locations
- UL Listed
- Conductors are annealed (soft) copper
- Conductors are annealed soft copper
- UL Listed and CSA certified
This 6 ft. 50 Amp 4-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Black in color
- UL certified
This 4 ft. 30 Amp 3-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Gray in color
- UL certified
Reliably power-up electric tools and equipment outdoors with this 25 ft. 16/3 Extension Cord. This cord features a light-duty weather resistant jacket. It's bright orange color makes it easily visible even in low light.
- Weather resistant jacket
- Light duty
- Rated for outdoors
- Highly visible orange color
- UL and CUL Listed
- 13 Amp
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks, and separation
- Non-metallic raceway is non-conducting
- 600-Volt
This 4 ft. 30 Amp 4-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Black in color
- UL certified
This Coleman Cable Inc. 50 ft. Red 14/3 in. SJTW Outdoor Extension Cord offers molded, water-resistant connectors with reinforced blades that accommodate outdoor usage. Use this extension cord to power tools and other equipment. It has a 15 Amp, 125-Volt capacity.
- Strong reinforced blades
- 50 ft. long
- Water-resistant jacket and connectors
- Made for outdoor use
This 50 ft. 12/3 SJTW Extension Cord with Lighted Ends. The vinyl jacket is moisture and abrasion resistant and will resist prolonged exposure to sunlight. This cord is rated for Outdoor Use and is UL Listed and OSHA.
- Weather resistant jacket
- Heavy duty
- Rated for outdoors
- Lighted receptacle shows power is ON
- 15 Amp
- 125-Volt
- UL and cUL listed
- Limited lifetime warranty
This 6 ft. 30 Amp 3-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Gray in color
- UL certified