Wire Holders
The armored Cable 1-Hole Support Straps are designed to support and secure service entrance cables to buildings. Made of flexible metal. Used with AC and MC cables.
- Used to support and secure service entrance cables to building structures
- For use with 14/2, 14/3, 12/2, 12/3, 10/2 AC and MC cables
- 1-hole design
- Durable
This product is for use with NM cables of size 14/2 - 10/2 flat (any combination) and 14/3 - 10/3 (any combination). The product is made to be used with wood studs. The CS2 is made from sturdy plastic. And depending on the size of the cable between 2 and 4 cables may be used.
- Places conductors 1-1/4 in. from the face of the stud
- To install simply position CS2 in desired location and drive in nail
- Dimensions: 2.5 in. x 2.75 in. x 1 in.
- Meets NEC code requirement 300-4D
- 1/4-20 Threaded Rod Size
- 7/8" Jaw Opening
- Bulk
- 5/16" Hardened Set Screw
500 Series surface metal raceway system is the ideal choice for a homeowner that wants to extend a circuit to add a receptacle or light fixture in their home. Surface metal raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Scuff coat finish
- Capacity: single-channel
- Low-profile, unobtrusive appearance
- Paintable and stainable using latex based products
- Color: ivory
- UL listed
- Indoor Or Outdoor Use
- Use In Overhead Services For Incoming Service Entrance Wires
- Medium Duty
500 Series surface metal raceway system is the ideal choice for a homeowner that wants to extend a circuit to add a receptacle or light fixture in their home. Surface metal raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Scuffcoat finish
- Multiple connector fittings allow customization for every project
- Low-profile, unobtrusive appearance
- Color: ivory
- Capacity: single-channel
- UL Listed
Small surface metal raceway systems are the ideal choice for a home owner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Used as a starting point for extending an electrical circuit or data line
- Fits any existing 1-Gang electrical box
- Compatible with both 500 Series (B-Series) and 700 Series (BW Series) raceways
- Ivory finish
- Paintable and stainable using latex based products
- UL listed
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Secure low-voltage wire into wood with the Gardner Bender 3/16 in. White Polyethylene Wire Staples (100-Pack). These stapeses easily install with the use of a hammer and offer corrosion- and UV resistance.
- Corrosion-resistant zinc-plated nail
- UV-resistant polyethylene saddle will not rust or crack
- Designed to secure speaker wire, telephone, bell, and thermostat wire into wood
- White finish
- 1 nail per staple for quick and easy installation
- For indoor and outdoor applications
Legrand/Wiremold small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- For inside surfaces at right angles
- Length: 2-3/4"
- Color: Ivory
- Paintable
- For Use Indoors Or Outdoors
- Holding Device For Service Entrance Wires
- Mounts Below The Overhead Service Entrance Cap
Legrand/Wiremold 700 Series surface metal raceway system is the ideal choice for a homeowner that wants to run multiple circuits or communication cabling in their home. Surface metal raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- ScuffCoat finish
- Low-profile, unobtrusive appearance
- Paintable and stainable using latex based products
- Color: ivory
- Capacity: single-channel
- UL Listed
The Gardner Bender Multi-Cable Staples (20-Pack) are great for reigning in complex cable runs. The tabs align themselves on wooden studs and pre-loaded nails allow for quick installations. Made with polypropylene material that is flame retardant and the nail is corrosion resistant. Can also be used to attach to metal studs.
- Plastic saddle
- Great for several cable types, including: NM, coaxial and cat 5
- SnapLock gate quickly and easily secures all cables
- Self-centering tab guides placement and is NEC compliant
- Pre-loaded nails included
- Red in finish
- 1/4-20 Threaded Rod Size
- 7/8" Jaw Opening
- Bulk
- 5/16" Hardened Set Screw
Cable Support that supports up to four 14/2 in. - 10/2 in. flat (any combination) and two 14/3 in. - 10/3 in. (any combination) NM cables. For use on wood studs. The support made of black plastic.
- Supports and positions the conductor
- Meets NEC code requirement 300-4D
- Places conductors 1-1/4 in. from the face of the stud
- CSA and UL Listed
- Dimensions: 2.65 in. x 2.53 in. x 0.5 in.
Arlington's non-metallic push-in connector for NM and flexible cord. It has easy push-in installation in a new work box. It is able to be used with an extensive cable range of NM cables.
- Can also be used with flexible cord
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 1.340 in. x 0.475 in. x 1.125 in.
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Used as a starting point for extending an electrical circuit or data line from an existing ceiling fixture
- Accommodates fixtures with 2-3/4 in. 3-1/2 in. and 4-1/16 in. mounting patterns
- Compatible with both 500 series (B-series) and 700 series (BW series) raceways
- Ivory finish
- Paintable and stainable using latex based products
- UL listed