Wire Connectors
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45°C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90°C, not recommended for fine-stranded, flexible wire, UL Listed
Used in dry locations to connect nonmetallic sheathed cable to a box or enclosure. May be used with a variety of cable types. Meets both US and Canadian compliances.
- Rugged metallic construction will last the lifetime of the installation
- Used with nonmetallic cable
- UL Listed
- CSA
King Innovation's AlumiConn Aluminum to Copper Lug is approved by the Consumer Product Safety Commission (CPSC) and numerous insurance companies as a safe method for aluminum wiring repair. AlumiConn is a lug style connector with three separate ports to eliminate intermixing of conductors. It coats aluminum wires with a thin layer of silicone sealant to provide resistance from oxidation, and uses set screws to break up surface oxides and provide a secure mechanical connection. Avoid a complete re-wire by using AlumiConn, the most cost-effective aluminum wiring repair solution available.
- 3 ports allow conductors to remain separate, permitting the lug to run at a lower temperature and provide longer term reliability
- Most cost-effective solution for repairing aluminum wiring systems
- Secure mechanical connection
- Contains a layer of corrosion inhibitor that provides resistance from oxidation
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45°C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90°C, not recommended for fine-stranded, flexible wire, UL Listed
- Snaps Into 1/2" K.O. - No Channelocks Required
- For 14/2 Or 14/3; 12/2 Or 12/3; Or 10/2
- UL File E-17979 Csa Lr 90875-2
- Bulk
This product is an all plastic snap-in blank. This item costs less than steel snap-in blanks and provide a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- For knock-outs
- Black in color
- Dimensions: 1.015 in. x 0.468 in.
- Trade size: 1/2 in.
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45°C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90°C, not recommended for fine-stranded, flexible wire, UL Listed
Echo Show 8 connects to Alexa to give you rich stereo sound with vivid visuals on an 8 in.HD screen. Set alarms and timers, display your favorite photos, check weather and traffic as you head out or catch up on news highlights and movie trailers. Connect with your favorite people by making hands-free video calls to the Alexa app or another Echo with a screen, use Announcements to send voice messages to every room with a supported Echo device or use Drop In as a two-way intercom between rooms
- With an 8 in. HD screen and stereo sound, Alexa can help manage your day at a glance
- Connect with video calling and messaging
- Ask alexa to show you movie trailers, TV shows, movies or news. Or listen to radio stations, podcasts and audiobooks
- Control your smart home
Fully Insulated Female Disconnects are entirely covered in an insulating nylon. Turned up edges give this spade more safety and reliability. Rated 300-Volt.
- Tab size: 0.250 x 0.032
- Stud size: 0.250
- Wire size: 16-14
- 105°C
Fitting, Non-Metallic Sheathed Cable, Knockout Size 1/2 in. Length 1-1/32 in., Height 1-5/16 in., Hole Size 5/16 in. x 9/16 in., Thermoplastic. For use with 10-2, 12-2 and 14-2 Non-Metallic Cable, 18-2 and 18-3 SJ and SJO Cords and 18-2 SV, SVO, SJT and SJTO Cords, Single or Multiple, Cord Capacity 0.125-0.300 in. in Diameter.
- 1/2 in.
- Connectors-straight
- Non-metallic
- UL E17583
ISR series insulated in-line splice connectors are suitable for connecting 2-wires. Abrasion and chemical resistant. UV rated. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
- Will not support combustion
- Cold temperature rated to -45°C
- Insulated with high dielectric strength plastisol and molded for precise fit
- Supplied with removable access plugs over the hex screw
- For Two Cables In 1/2" K.O.
- Fits 14/2 Or 12/2
- Saves Time and Money On Installation
- Snap Into 1/2" K.O. - No Tools Required
- Bulk
Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105°C (221°F). Color coded for quick and easy size selection. Use for: Air conditioners, ceiling fans, doorbells, indoor lighting, switches, thermostats, ballasts, large and small appliances.
- Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
- Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
- Flame-retardant properties resist heat distortion up to 105°C/221°F
- High-dielectric shell features deep skirt design to prevent exposure of bare wire
- Rated at 600-Volt MAX in building wire and at 1000-Volt MAX in lighting, fixtures/luminaries and signs
- Copper to copper connections only
- Copper-to-copper connections only
- Connection rated at 600-Volt MAX for building wiring and rated at 1,000-Volt MAX in lighting fixtures/luminaries and signs
This is product is an all-plastic snap-in blank. This item will save you money as it costs less than steel snap-in blanks while providing a safer installation. A metal blank in a plastic enclosure is not grounded and could become a shock hazard.
- CSA and UL Listed
- Black
- Knock-outs
- Trade size: 3/4 in.
- Dimensions: 1.250 in. x 0.468 in.
- Installs Without Locknuts - Just Tighten Screws
- For Range/Dryer Cable, Romex Or Service Entrance Cable
- Bulk
These kits have been carefully designed to include the most popular NSi mini-term terminals. Cases are reusable and made of extremely durable polypropylene. Kits provide the ultimate in organization and convenience. Clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing.
- Vinyl insulated: 300-Volt, 75°C
- cULus Listed for quick connect terminals
- cULus listed wire connector kit includes
- (40) R22-6V
- (40) R22-10V
- (30) R16-6V
- (30) R16-10V
- (20) R12-8V
- (20) R12-14V
- (40) F22-250-3V
- (35) F16-250-3V
- (20) F12-250-3V
- (35) B22-V
- (25) B16-V
- (15) B12-V
- (40) S22-6V
- (35) S22-10V
- (20) S16-6V
- (35) S16-10V
- (25) S12-8V
- (15) S12-14V
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4/0 Str-2 Sol, Conductor Range for Min Tap with One Max Main 6 Sol. Made of Bronze Alloy and used for Splicing, tapping or terminating conductors in power and grounding electrical connection.
- Conductor range for equal main and tap 4/0 Str-2 Sol
- Conductor range for min tap with one max main 6 sol
- Splicing, tapping or terminating conductors in power and grounding electrical connection
- UL E9809
Constructed from electro-tin-plated copper tubing. The center stop provides equal insertion of wires. Made with vinyl.
- Vinyl (PVC)
- Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
- Continuous-duty temperature range of -40°F to 194°F (-40°C to 90°C)
- 600-Volt
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Both the bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- High strength split-bolt connector
- Conductor range for equal main and tap 4 sol-8 sol
- Bolt and nut of hex design
- UL E9809
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 2/0 Str-2 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- Copper pressure bar
- Bolt and nut of hex design
- Bronze alloy
- UL E9809
These kits have been carefully designed to include the most popular NSi miniterm terminals. Cases are reusable and made of extremely durable polypropylene. Kits provide the ultimate in organization and convenience. Clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing.
- Vinyl insulated: 300-Volt, 75°C
- cULus listed for quick connect terminals
- cULus listed wire connector and kit includes
- (10) R22-6V
- (10) R22-8V
- (10) R22-10V
- (10) R16-6V
- (10) R16-8V
- (10) R16-10V
- (5) R12-10V
- (10) S22-8V
- (10) S22-10V
- (10) S16-8V
- (10) S16-10V
- (10) S12-10V
- (10) M22-250-3V
- (10) M16-250-3V
- (10) B22-V
- (10) B16-V
- (10) B12-V
- (10) F22-250-3V
- (10) F16-250-3V
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures