Non-Metallic Conduit Systems
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
Arlington's Snap2It Zero to 90 degree Non-Metallic Connector for use this liquid-tight conduit, type B only. Easy to install with push on installation. It is produced from UV rated plastic for long outdoor life.
- Adjusts for all angles 0 degree -90 degree
- To adjust the angle simply loosen the center nut, twist to the correct angle and retighten
- Knockout size: 3/4 in.
- Trade size: 3/4 in.
Arlington's Screw 90 degree non-metallic connector. It is used with non-metallic liquid-tight conduit, type B only. It is produced from UV rated plastic for long outdoor life.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- To install simply screw onto the conduit until it stops
- Fitting is not in alignment with knock-out you may unscrew the fitting up to 1 full turn for adjustment
- Also for use with flexible non-metallic tubing
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.489 in. x 0.545 in. x 2.872 in.
Low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. A liquid tight seat and superior pullout resistance is accomplished by just tightening the nut. A sealing is furnished to assure a liquid-tight seal when installing in non-threaded openings.
- Unique grommet with gripping fingers
- Includes polypropylene sealing ring
- Trade size: 1/2 in.
- Cable ranges: 0.200 - 0.472
- Dimensions: 1.792 in. x 0.63 in. x 1.042 in.
Arlington Snap2It Zero to 90-degree non-metallic connector. It made to be used with non-metallic liquid-tight conduit, type B only. It installs easily with push on installation.
- May also be used with flexible nonmetallic tubing
- Produced from UV rated plastic for long outdoor life
- Adjusts for all angles: 0 degree -90 degree
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Screw-On 90 degree non-metallic connector for use with non-metallic liquid tight conduit, type B. The connector is produced from UV rated plastic for long outdoor life. Simply screw the connector onto the conduit until it stops, if the fittings are not in alignment with the knockout, you may unscrew the fitting up to one full turn for adjustment.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- UV rated plastic
- Use with non-metallic liquid tight conduit, type B
- Also for use with flexible non-metallic tubing
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 2.110 in. x 0.542 in. x 2.525 in.
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
Snap2It Non-Metallic Connector for use with non-metallic liquid-tight conduit, type B only. No tools needed, simply push onto conduit to install. The product is made from UV rated plastic for long outdoor life.
- For use with non-metallic liquid-tight conduit, type B only
- Push on installation
- Produced from UV rated plastic for long outdoor life
- Removable and reusable
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
- Trade size: 1/2 in.
- Knockout size: 1/2 in.