Non-Metallic Conduit Fittings
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Used in dry locations to connect nonmetallic sheathed cable to a box or enclosure. May be used with a variety of cable types. Meets both US and Canadian compliances.
- Rugged metallic construction will last the lifetime of the installation
- Used with nonmetallic cable
- UL Listed
- CSA
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
The 1 in. Twin-Screw Clamp Connector is designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. Corrosion resistant. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Connects non-metallic sheathed cable and flexible cord to metal enclosures
- Made of corrosion-resistant zinc alloy and galvanized steel
- Tri-drive screw-head design works with any screwdriver
- Reversible locknut is designed to cut through protective coatings and form a grounded connection
- UL and CSA Listed
With the 1-1/4 in. Twin-Screw Clamp Connector, you can adjoin non-metallic sheathed cable or flexible cord to a metal enclosure such as a steel outlet box. The screws feature a Tri Drive design for Phillips, slotted and square screwdriver compatibility.
- Secures non-metallic sheathed cable and flexible cord to a metal enclosure such as a steel outlet box
- High-strength, corrosion-resistant zinc alloy body and locknut
- Galvanized steel clamp and screws
- UL and CSA listings
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- Tri drive screw head design will work with Phillips, slotted and square screwdrivers
- For indoor use
The 3/4 in. Twin-Screw Clamp Connectors (5-Pack) are designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. They are ideal for service entrances or other indoor applications. This clamp connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Corrosion-resistant galvanized-steel construction
- Reversible locknut is designed to cut through protective coatings to assure ground connectivity
- UL and CSA Listed
- Tri-drive screw design works with all screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Install the 1-1/2 in. Twin Screw Non-Metallic Sheathed Cable Clamp Connectors to fix non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut penetrates protective coatings on boxes and enclosures to maintain grounding. This cable clamp connector meets UL and CSA requirements.
- Connects non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
With these 3/4 - 1 in. 2-Piece Clamp Connectors (5-Pack), you can adjoin non-metallic sheathed cable to steel outlet boxes as well as other metal enclosures. For indoor use. Made of galvanized steel.
- Secures non-metallic sheathed cable to a metal enclosure such as a steel outlet box
- Made of corrosion-resistant galvanized steel
- Compatible with #10 - #14 cables
- No locknut required
The 1/2 in. Cable Connectors (5-Pack) connect non-metallic sheathed cable to a steel outlet box or similar metal enclosure. They are made of polypropylene plastic and are easy to install. Designed for fast, easy installation without screws or locknuts.
- Connect non-metallic sheathed cable to metal electrical enclosures
- Made of polypropylene plastic
- UL and CSA Listed
- Designed for fast, easy installation without screws or locknuts
- No screws and locknuts are required
Use the 3/8 in. Twin Screw Clamp Connectors (100-Pack) to connect non-metallic sheathed cable to steel outlet boxes. The connectors are designed for indoor use only and fit standard 1/2 in. knockouts. They are made of zinc and are corrosion resistant.
- Use to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Use indoors only
- Body and locknut are die-cast of high-strength zinc alloy
- Clamp and screws are made of zinc-plated steel
- Fits in a standard 1/2 in. knockout and is designed to work with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
1-Piece screw-in liquid tight connector for use with metallic and non-metallic liquid-tight conduit, type B only. Fast and easy screw on installation. Built-in gasket maintains liquid-tight seal.
- Costs 20% less than multi-piece fittings
- 1-piece, low profile construction
- No tools required
- Dimensions: 0.525 in. x 1.535 in.
- Knockout size: 3/4 in.
Use the 3/8 in. 2-Piece Clamp Connectors (5-Pack) to connect #14 - #10 non-metallic sheathed cable to steel outlet boxes or other metal enclosures. They are compatible with standard 1/2 in. knockouts. Use indoors.
- Secure #14 - #10 non-metallic sheathed cable to steel outlet boxes or other metal enclosures
- Zinc-plated steel resists corrosion
- Fits standard 1/2 in. knockouts
- For indoor use only
- Designed for easy installation
Use in a dry location to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Made from Nylon. Snap-in style - no screws or locknuts required.
- 3/8 in. size fits 1/2 in. knockout
- Design allows for quick and easy 2-step installation, push into box and insert cable
- Indoor use only
- Dry location only
The 3/4 in. Non-Metallic Cable Connector is made of plastic and is compatible with rigid non-metallic conduit (RNC). This standard fitting is intended for indoor applications. It is UL and CSA safety listed.
- Indoor use
- Made of plastic
- Compatible with RNC conduit
- UL and CSA Listed
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
Arlington's Snap2It Zero to 90 degree Non-Metallic Connector for use this liquid-tight conduit, type B only. Easy to install with push on installation. It is produced from UV rated plastic for long outdoor life.
- Adjusts for all angles 0 degree -90 degree
- To adjust the angle simply loosen the center nut, twist to the correct angle and retighten
- Knockout size: 3/4 in.
- Trade size: 3/4 in.
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
Snap2It Non-Metallic Connector for use with non-metallic liquid-tight conduit, type B only. No tools needed, simply push onto conduit to install. The product is made from UV rated plastic for long outdoor life.
- For use with non-metallic liquid-tight conduit, type B only
- Push on installation
- Produced from UV rated plastic for long outdoor life
- Removable and reusable
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Installs Without Locknuts - Just Tighten Screws
- For Range/Dryer Cable, Romex Or Service Entrance Cable
- Bulk
- Installs Without Locknuts - Just Tighten Screws
- For Range/Dryer Cable, Romex Or Service Entrance Cable
- Bulk
- For Two Cables In 1/2" K.O.
- Fits 14/2 Or 12/2
- Saves Time and Money On Installation
- Snap Into 1/2" K.O. - No Tools Required
- Bulk
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
Low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. A liquid tight seat and superior pullout resistance is accomplished by just tightening the nut. A sealing is furnished to assure a liquid-tight seal when installing in non-threaded openings.
- Unique grommet with gripping fingers
- Includes polypropylene sealing ring
- Trade size: 1/2 in.
- Cable ranges: 0.200 - 0.472
- Dimensions: 1.792 in. x 0.63 in. x 1.042 in.