Searched for "39131700"
Carlon PVC Grey 1-gang weatherproof cover. Cover is weatherproof and UV resistant. Cover is suitable for outdoor use.
- Suitable for outdoor use
- PVC construction
- Fits 1-Gang FS boxes
- UL and ETL listed for safety
- Supplied with stainless-steel mounting screws and a gasket
The #2-1/2 Conduit and Pipe Hangers are designed to secure and suspend 1-1/4 in. EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Use to secure and suspend 1-1/4 in. EMT conduit from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2-1/2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
- Used to hang 1 1/4 in. EMT conduit
The #5 Conduit and Pipe Hangers are designed to secure and suspend 2 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 2 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #5 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
Knock-Out Seals are designed to cover exposed knock-out holes in steel boxes and other metal enclosures. The 1/2 in. Knock-Out Seals (4-Pack) offer corrosion resistance. They are convenient and easy to use.
- Covers knock-out holes in metal enclosures
- Zinc-plated steel
- Corrosion resistant
- Designed for indoor and outdoor use
The 3/4 in. Knock-Out Seals (4-Pack) are used to cover exposed knock-out holes in steel boxes and other metal enclosures. Suitable for indoor and outdoor use. The seals are made with zinc-plated steel for strength.
- Covers exposed knock-out holes
- Corrosion-resistant zinc-plated steel construction
- For use in steel boxes and other metal enclosures
- Suitable for indoor and outdoor applications
The 1/4 in. 1-Hole Ground Cable Straps (50-Pack) are handy for securing bare solid wire to a working surface. They are corrosion resistant for indoor or outdoor use. Easy installation.
- Straps secure bare wire to a wood, masonry or other work surface
- Compatible with EMT cable
- Made of corrosion-resistant galvanized steel
- Quick and easy to install
The 3/8 in. - 1/2 in. Conduit and Pipe Hangers (5-Pack) with speed threads are Designed to secure and suspend Rigid and EMT conduits from overhead supports. Bolt has a square neck for easy assembly. UL and CSA listed.
- Use to secure and suspend 3/8 in. and 1/2 in. rigid and 1/2 in. EMT conduits from overhead supports
- Indoor/outdoor use
- Zinc-plated steel construction
- Corrosion resistant
This is product is an all-plastic snap-in blank. This item will save you money as it costs less than steel snap-in blanks while providing a safer installation. A metal blank in a plastic enclosure is not grounded and could become a shock hazard.
- CSA and UL Listed
- Black
- Knock-outs
- Trade size: 3/4 in.
- Dimensions: 1.250 in. x 0.468 in.
Feed wire through the Halex 2-1/4 in. Medium-Duty Porcelain Wire holder in overhead installations. Its zinc-plated lag screw is 2-1/4 in. long. This wire holder can be used inside or outdoors.
- For use in overhead services to secure incoming service entrance wires
- Made of porcelain and zinc-plated steel
- Lag screw is 2-1/4 in. L
- For indoor or outdoor applications
The 2 in. Service Entrance Cap is designed for use in overhead service entrances with rigid conduit, intermediate metal conduit (IMC) or EMT conduit. The cap serves as a connecting point for the service entrance wires.
- Connects service entrance wires
- Copper-free die cast aluminum resists corrosion
- Designed for indoor or outdoor use in overhead service entrances
- Compatible with rigid conduit, EMT conduit or IMC
- UL and CSA listed for safety and peace of mind
- Clamp-on style for installation
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Our 1 in. plastic knock-out seal. This item costs less than the steel snap-in blanks and provides a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- Plastic - provides safer installation
- Black
- For knock-outs
- Trade size: 1 in.
- Dimensions: 1.500 in. x .468 in.
- For Use Indoors Or Outdoors
- Holding Device For Service Entrance Wires
- Mounts Below The Overhead Service Entrance Cap
The 2 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
The 2 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
- Corrosion resistant
BELL closure plugs used to seal off unused outlets. Used with outdoor weatherproof boxes or extension rings that have 3/4 in. threaded outlets, Product contains 4 closure plugs.
- Diecast zinc construction
- 3/4 in. NPT thread
- For use with outdoor weatherproof electrical boxes
- 4-pack
Wall Plates are used for home, commercial and industrial settings for enhanced durability and appearance. They feature a Premium North American powdercoat for corrosion resistance. Metal wallplates have a beauty, weight and feel that plastic can't replace.
- Easily primed and paintable to match or compliment walls
- Won't bow, crack or distort during installation
- Solid sound compared to thin, hollow resonance of economy plastic plates
- Fixture mount
- Includes matching screws
The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
U-Conduit Body is a patented 10-in-1, die cast aluminum, Universal Conduit Body for both EMT and Rigid/IMC conduit. The interchangeable, patented, self-aligning covers and panels allow you to easily configure the conduit body to any standard configuration including LB, LL, LR, T and C. The U-Conduit body is available in three trade sizes: 1/2 in. (cat no. UCB050), 3/4 in. (UCB075) and 1 in. (UCB0100).
- Seamless pre-affixed gasket
- Includes (1) body, (3) blank covers/panels, (1) T-panel, (1) LB/LL/LR panel, (1) closure pug and extra hardware
- More wiring capacity than standard conduit bodies
- Suitable for weatherproof installs
The 1/4 in. 20-Thread Beam Clamp attaches to the outside of a beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger. It eliminates the need to drill a hole through the beam. Conduit hanger can be connected directly or with a threaded rod.
- Provides a mounting base for attachment of a conduit hanger
- Corrosion-resistant galvanized-steel construction
- Clamps on the outside of the beam, no need to drill
- UL and CSA listed
The 1-1/4 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
- Corrosion resistant
3#3 to 3#4/0 1-Hole Service Entrance Cable Straps (4-Pack) are a premier choice for securing service entrance cables. Attach to wood, masonry and more, inside or outdoors. They are corrosion resistant. They are constructed of steel.
- Secures bare solid copper wire to a working surface
- Made of steel
- Fits sizes 3#3 - 3#4/0
- Quick installation
Arlington's non-metallic bushing for metal studs. This bushing fits irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening the structural member. Use this bushing to comply with paragraph 300.4(b) (1) of the 2014 NEC code.
- Fits a standard 1 in. knockout
- Snap in design
- Stud size: 2 in. x 4 in.
- Bushing and washer snap together, no need to separate