Refrigerator & Freezer Repair Parts
This 2 pack of trays stack securely and are designed to use minimal space in your freezer. Channels are designed to fill tray quickly and evenly. To release after frozen twist for a quick release of cubes. Great for daily use or entertaining in the home. Standard size cubes will keep your favorite beverage cool.
- Each tray can make 16 ice cubes per freezing session
- Channels allow quick filling of water and with an easy twist to release ice cubes
- Trays stack securely to minimize space in freezer and are dishwasher safe
- White plastic construction
- Each tray is 1-1/2 inch x 4-1/4 inch x 12-5/8 inch
- Please refer to the line art drawing and compare with your needs before purchasing
When you choose this Stainless Steel supply line, you're choosing a strong, durable product that is constructed with a core of extruded PVC tubing. It is then over-braided with Stainless Steel to added strength. The design of this appliance connector incorporates brass inserts, plated nuts, and a washer that ensures a dependable hand-tight seal.
- Stainless steel braiding over braided PVC for strength
- Use to hook up your icemaker to the water supply
- Brass 1/4 in. compression fittings on both ends
- Lead free NSF372 approved
- Bends freely, without kinking or crimping, installation is easier, especially in cramped quarters
- Internal corrosion resistance to harsh water conditions
- This product is safe and to supply water to Icemakers/water dispensing refrigerators
- IAPMO certicated ASME A112.18.6-2009/CSA B125.6 NSF/ANSI 61
Producing seven ice cubes per cycle and up to 130 cubes per day, the GE Ice Maker Kit for Top-Mount Refrigerators keeps ice at-the-ready for chilling beverages and filling coolers. The included bucket holds up to 5 lbs. of ice while the ice maker churns out up to 3 lbs. per day. Built-in sensors measure water levels in the mold and detect the temperature of the water, ensuring cubes are full-sized and thoroughly frozen before being dispensed into the tray.
- Produces 100-130 cubes or 3 lbs. of ice per day
- Included bucket holds up to 5 lbs. of ice
- Automatically turns off when ice tray is full
- Tools required for installation: flathead and Phillips screwdrivers, pliers and a utility knife (sold separately)
- Limited 1 year entire appliance warranty
- Dimensions: 9.5 in. W x 9.5 in. H x 14.5 in. D
- Quickly install a new or replacement IM4D icemaker unit with an all-inclusive kit
- For use in most GE top-freezer refrigerators and some bottom-freezer refrigerators, please check the label on the back of your refrigerator to ensure compatibility
The Fluidmaster Braided Stainless Steel Ice Maker Connectors are built with quality and ease of use in mind. Fitting standard 1/4 in. female compression thread x 1/4 in. female compression thread these ice maker water supply connectors ear easy to install. The braided stainless steel construction remains strong, but with exceptional flexibility and the heavy-duty nickel plated brass hex nuts are easy to grip for quick DIY installation. The design is meant to resist kinks or creases in hard to reach install areas. Fluidmaster Ice Maker Connectors exceed all code requirements for flexible water connectors and are lead free. Offered in a variety of lengths for many different ice maker needs. Replace outdated or leaky water supply connectors with new Fluidmaster Braided Stainless Steel Ice Maker Connectors, available in 5 ft., 6 ft., 7 ft., 8 ft. and 10 ft. sizes.
- Upgrade your ice maker connector with a quality replacement
- Highly flexible for easy installation
- 1/4 in. comp x 1/4 in. comp female compression thread connection
- Braided stainless steel build wont kink or crease
- Includes heavy-duty nickel plated brass hex nuts that are easy to grip
- Lead free and meets all code requirements
- 5 year warranty
- Replace old vinyl or leaky water supply connectors
- Available in 60 in., 72 in., 84 in., 96 in. and 120 in. sizes
This evaporator motor is in the back of the freezer and circulates air over the coils. Designed to meet or exceed OEM specifications. Direct replacement for GE models.
- 115-Volt
- 3-Watt
- 60 Hz
- Designed to meet or exceed OEM specifications
- Replaces OEM part WR60X0141
The Fluidmaster Braided Stainless Steel Ice Maker Connectors are built with quality and ease of use in mind. Fitting standard 1/4 in. female compression thread x 1/4 in. female compression thread these ice maker water supply connectors ear easy to install. The braided stainless steel construction remains strong, but with exceptional flexibility and the heavy-duty nickel plated brass hex nuts are easy to grip for quick DIY installation. The design is meant to resist kinks or creases in hard to reach install areas. Fluidmaster Ice Maker Connectors exceed all code requirements for flexible water connectors and are lead free. Offered in a variety of lengths for many different ice maker needs. Replace outdated or leaky water supply connectors with new Fluidmaster Braided Stainless Steel Ice Maker Connectors, available in 5 ft., 6 ft., 7 ft., 8 ft. and 10 ft. sizes.
- Upgrade your ice maker connector with a quality replacement
- Highly flexible for easy installation
- 1/4 in. comp x 1/4 in. comp female compression thread connection
- Braided stainless steel build wont kink or crease
- Includes heavy-duty nickel plated brass hex nuts that are easy to grip
- Lead free and meets all code requirements
- 5 year warranty
- Replace old vinyl or leaky water supply connectors
- Available in 60 in., 72 in., 84 in., 96 in. and 120 in. sizes
Compatible with most GE top-freezer, bottom-freezer and side-by-side refrigerators, this PVC Ice Maker Kit produces a steady supply of crescent-shaped ice cubes for your cooling needs. It dispenses up to 3 lbs. of ice per day and shuts off automatically once the bucket fills up. Fasteners, fill tubes and a water valve are included to make easy work of installation.
- Operates with an electric motor, electronically operated water valve, and an electrical heating unit
- Produces 100-130 cubes or 4 lbs. of ice per day
- On/off switch allows manual activation and shutdown
- Includes 2 ice buckets, 1 to be used depending on your refrigerator model (3 lbs. capacity)
- Built-in feeler arm automatically deactivates device when ice bucket is full
- Tools required for installation: flathead and Phillips screwdrivers, pliers and a utility knife (sold separately)
- Limited 1-year entire appliance warranty
- Includes everything needed for installation in an icemaker-ready top-freezer and most bottom-freezer refrigerators, check case back for label or Use and Care Manual for icemaker kit compatibility
- Designed for GE Appliances and Hotpoint top-freezer and most bottom-freezer refrigerators made in 2001 or later, and 2005 and later GEA side-by-side models, check case back for label or Use and Care Manual for icemaker kit compatibility
This part is best used in refrigerators. Installation time is short and a quality part. Light bulb is 60-Watt.
- 120-Volt
- Replaces Whirlpool models
- Installation time 15 min
- Good Quality Parts
The SL series line of exact replacement heavy-duty sealed bimetal disc controls meets the higher electrical requirements of commercial applications. Can handle electrical loads up to 25 Amp at 120/240VAC. If the evaporator coils in the freezer frost over then this thermostat may be defective.
- Replaces: WR50X10071, WR50X10076, WR50X10021
- Lead length: 15 in.
- Open temperature: 64
- Close temperature: 23
- Designed to meet or exceed OEM specifications
The ML Series of 3/4 in. (19 mm) is a bimetal disc temperature control. It offers proven reliability in a moisture resistant sealed design. The ML45 is rated for electrical loads at up to 10 Amp at 120 VAC and 5 Amp at 250 VAC.
- 12 in. leads
- Open temperature: 45 degree F
- Close temperature: 25 degree F
- Differential: 20 degree F
- UL recognized
- CSA approved
When you choose this PVC supply line, you're choosing a strong, durable product that is constructed with a core of extruded PVC tubing. It is then over-braided with polyester yarn and another layer of PVC for added strength. The design incorporates brass inserts, plated nuts, and a washer that ensures a dependable hand-tight seal.
- PVC with polyester braiding for superior strength
- Use to hook up your icemaker to the water supply
- Brass 1/4 in. compression fittings on both ends
- Maximum working pressure 800 psi
- Lead free NSF372 approved
- IAPMO certicated ASME A112.18.6-2009/CSA B125.6 NSF/ANSI 61
5-pack of trays stack securely and are designed to use minimal space in your freezer. Channels are designed to fill tray quickly and evenly. To release after frozen twist for a quick release of cubes. Great for daily use or entertaining in the home. Standard size cubes will keep your favorite beverage cool.
- Each tray can make 12 ice cubes each freezing session
- Channels allow quick filling of water and with an easy twist to release ice cubes
- The trays stack securely to minimize space in freezer and are dishwasher safe
- Sturdy blue plastic construction
- Each tray is 1.5 inch x 4-1/4 inch x 10-1/2 inch
- Please refer to the line art drawing for dimensions and compare with your needs before purchasing
Replacement Defrost Timers are designed to exact OEM features and specifications. Made in an energy saving plastic case for domestic refrigerators and freezers. 6-Hour / 25-Minute timing.
- Energy saving plastic construction
- Exact OEM features and specifications
- Domestic refrigerators and freezers
- UL recognized
- CSA approved
This evaporator motor is in the back of the freezer and circulates air over the coils. High quality design.. Direct replacement for GE models.
- 115-Volt
- 7.4-Watt
- CCW Rotation
- Universal motor
SUPCO offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors. Just choose the right combination for your application.
- Universal replacement on over 10,000-models as a universal relay overload kit
- Direct replacement for 2400 Whirlpool models
- Can be used with and without capacitor
- Designed to meet or exceed OEM specifications
Keep your Frigidaire top-mounted refrigerator stocked with ice using this Ice Maker Kit. It produces up to 2 lbs. of ice per day and holds up to 5 lbs. of cubes in the included bucket. An automatic ice-level controller arm shuts down production when the bucket is full and can be manually switched off when you're away for extended periods of time.
- Produces up to 2 lbs. of ice per day
- Included bucket holds up to 5 lbs. of ice
- Shuts off automatically when bucket fills
- Refer to refrigerator rear to determine which ice maker kit is compatible with your unit
- Tools required for installation: adjustable wrench, utility knife, pliers, Phillips screwdriver, putty knife and 1/4 in. socket wrench or nut driver (sold separately)
- Water valve, angled fill tube
- Eliminates the need to fill and refill ice cube trays
- Includes installation instructions, ice maker, valve, bucket and hardware
Defrost bi-metal thermostat protects the evaporator from overheating during the defrost cycle. This part replaces Whirlpool models. This part is a good quality part for your refrigerator.
- Replaces Whirlpool
- Good quality part
- Prevents evaporator from over heating during defrost cycle
- Weight of part .0625 lbs.
Evaporator fan motor used on GE refrigerators. Designed to meet or exceed OEM specifications. Covers many common part numbers in the industry.
- 120-Volt
- 0.16 Amp
- 3000-RPM
- 60 Hz
Used on direct drive washers with no belt. Easy installation. Replaces all previous versions.
- Motor Coupler for Whirlpool washers
- Includes metal hub for motor/transmission shaft
- Fits Whirlpool direct drive washers
- Designed to meet or exceed OEM specifications
Defrost bi-metal thermostat protects the evaporator from overheating during the defrost cycle. This thermostat replaces Whirlpool models. Installation time is around 45-minutes.
- Replaces whirlpool part number 4387490
- Protects the evaporator from over heating during the defrost cycle
- Installation time around 45-minutes
- Weight of part 0.09 lbs.
If you're tired of fighting with your ice maker, make it simple and replace the whole system with the RIM200 universal ice maker replacement kit. Don't deal with difficult installation. This easy to install kit will help you start fresh with a brand new system and get back to enjoying the convenience of ice when you want it and how you want.
- Universal replacement kit fits a large variety of brands and models
- Complete kit includes ice maker module, ice bin, and single coil valve, fill tubes; fill line, adapter plate for GE, harnesses, and all the hardware for complete installation
- Thermal safety cutout
- Automatic or manual shutoff
- Designed to replace the existing modular icemaker or install as an add-on
- Disconnect power, to prevent shock hazard, injury, or possible death, disconnect all electrical power to the appliance before any work is started
- Icemaker will need to cycle for about 24-hours to make quality ice
- Make sure freezer temperature is 10 or lower
This shelf gives you a secure spot to put items in the refrigerator. This part replaces GE models. Installation time is 10 min.
- Replaces GE
- Installation time 10 min
- The shelf gives a secure spot for your items
- Weight of part 1.59 lbs.
The most common direct replacement door gaskets. A variety of profiles and sizes. All compression gaskets are made from refrigeration grade 100% virgin vinyl.
- Dimensions: 41 in. x 26 in.
- GE direct replacement door gasket
- Easy to install
- Designed to meet or exceed OEM specifications
- Fits GE WR24X10229
This part acts as a safety device against over-heating in case of mechanical failure. It is a clip-on tubing style. 2 bare wire leads are 15 in. long.
- Genuine GE replacement part
- Wire nuts are required to make the splice connection; wire nuts not included.
- Nutdriver required for installation
- Limited 1-year warranty